scholarly journals Calculation of Presumed Bearing Capacity of Shallow Foundations According to the Principles of Eurocode 7

2017 ◽  
Author(s):  
Balázs Móczár ◽  
János Szendefy
Keyword(s):  
Bearing Capacity ◽  
Design Procedure ◽  
Shallow Foundations ◽  
Soil Types ◽  
Design Procedures ◽  
Eurocode 7 ◽  
Previous Design ◽  
Simplified Calculation

Various simplified design procedures can be found in the literature, intended for the design of shallow foundations of lower importance buildings and pre-dimensioning. In most cases, these design procedures are based on vaguely defined soil types and parameters, and are not compatible with Eurocode. The aim of this paper is to establish a „design procedure by prescriptive measures”, according to the guidelines of Eurocode 7. Within this framework, previous design procedures are reviewed and a new procedure is developed for the simplified calculation of the bearing capacity of shallow foundations, conforming to the principles and rules of Eurocode 7.

scholarly journals Comparative Analysis of Kazakhstani and European Approaches for the Design of Shallow Foundations

2020 ◽  
Vol 10 (8) ◽  
pp. 2920
Author(s):  
Assel Shaldykova ◽  
Sung-Woo Moon ◽  
Jong Kim ◽  
Deuckhang Lee ◽  
Taeseo Ku ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Summation Method ◽  
Shallow Foundations ◽  
Shallow Foundation ◽  
Design Procedures ◽  
Geological Conditions ◽  
Elastic Settlement ◽  
Geotechnical Design ◽  
The Difference ◽  
Design Calculations

The design of shallow foundations is performed in accordance with different building regulations depending on geotechnical and geological conditions. This paper involves the design calculations applying Kazakhstani and European approaches. The design of shallow foundations in Nur-Sultan city in Kazakhstan was implemented by the calculation of bearing capacity and elastic settlement in accordance with the design procedures provided in SP RK 5.01-102-2013: Foundations of buildings and structures, and Eurocode 7: Geotechnical design. The calculated results of bearing capacity and elastic settlement for two types of shallow foundations, such as pad foundation and strip foundation, adhering to Kazakhstani and European approaches are relatively comparable. However, the European approach provided higher values of bearing capacity and elastic settlement for the designed shallow foundation compared to the Kazakhstani approach. The difference in the results is explained by the application of different values of partial factors of safety for the determination of bearing capacity and different methods for the calculation of the elastic settlement of shallow foundations (i.e., elasticity theory and layer summation method).

Bearing capacity of soils for crawler cranes

2008 ◽  
Vol 45 (9) ◽  
pp. 1282-1302 ◽  
Author(s):  
Xiteng Liu ◽  
Dave H. Chan ◽  
Brian Gerbrandt
Keyword(s):  
Computer Simulation ◽  
Bearing Capacity ◽  
Soil Type ◽  
Traditional Method ◽  
Design Procedure ◽  
Field Studies ◽  
Shallow Foundations ◽  
Allowable Bearing Capacity ◽  
Total Settlement

Few studies have been carried out on the bearing capacity of soils for crawler cranes. Directly applying the bearing capacity equations used for shallow foundations to cranes often leads to conservative design. The total settlement is of less concern for cranes than for buildings, and cranes can normally tolerate larger differential settlements. Computer simulation and field studies have been carried out to study the allowable bearing capacity of soils for cranes. Equations modified from the traditional method to calculate the bearing capacity for shallow foundations have been proposed. In general, it was found that the bearing capacity for crawler cranes could be increased by as much as 50% from that for foundations. This depends on the soil type, crane, and mat configuration. A design procedure in evaluating foundation support for crawler cranes is also proposed.

scholarly journals Influence of the groundwater level on the bearing capacity of shallow foundations on the rock mass

2021 ◽  
Author(s):  
Ana Alencar ◽  
Rubén Galindo ◽  
Svetlana Melentijevic
Keyword(s):  
Rock Mass ◽  
Bearing Capacity ◽  
Groundwater Level ◽  
Sensitivity Study ◽  
Shallow Foundations ◽  
Unit Weight ◽  
Geological Strength Index ◽  
Strength Index ◽  
Mass Type

AbstractThe presence of the groundwater level (GWL) at the rock mass may significantly affect the mechanical behavior, and consequently the bearing capacity. The water particularly modifies two aspects that influence the bearing capacity: the submerged unit weight and the overall geotechnical quality of the rock mass, because water circulation tends to clean and open the joints. This paper is a study of the influence groundwater level has on the ultimate bearing capacity of shallow foundations on the rock mass. The calculations were developed using the finite difference method. The numerical results included three possible locations of groundwater level: at the foundation level, at a depth equal to a quarter of the footing width from the foundation level, and inexistent location. The analysis was based on a sensitivity study with four parameters: foundation width, rock mass type (mi), uniaxial compressive strength, and geological strength index. Included in the analysis was the influence of the self-weight of the material on the bearing capacity and the critical depth where the GWL no longer affected the bearing capacity. Finally, a simple approximation of the solution estimated in this study is suggested for practical purposes.

Bearing capacity improvement of shallow foundations using a trench filled with granular materials and reinforced with geogrids

2021 ◽  
Vol 14 (15) ◽  
Author(s):  
Mohammad Mahdi Hajitaheriha ◽  
Davood Akbarimehr ◽  
Amin Hasani Motlagh ◽  
Hossein Damerchilou
Keyword(s):  
Bearing Capacity ◽  
Granular Materials ◽  
Shallow Foundations ◽  
Capacity Improvement

scholarly journals Application of Artificial Neural Networks for Predicting the Bearing Capacity of Shallow Foundations on Rock Masses

2021 ◽  
Author(s):  
M. A. Millán ◽  
R. Galindo ◽  
A. Alencar
Keyword(s):  
Bearing Capacity ◽  
Analytical Solutions ◽  
Shear Failure ◽  
Numerical Models ◽  
Computational Effort ◽  
Shallow Foundations ◽  
Geological Strength Index ◽  
Rock Masses ◽  
Ann Model ◽  
Artificial Neural

AbstractCalculation of the bearing capacity of shallow foundations on rock masses is usually addressed either using empirical equations, analytical solutions, or numerical models. While the empirical laws are limited to the particular conditions and local geology of the data and the application of analytical solutions is complex and limited by its simplified assumptions, numerical models offer a reliable solution for the task but require more computational effort. This research presents an artificial neural network (ANN) solution to predict the bearing capacity due to general shear failure more simply and straightforwardly, obtained from FLAC numerical calculations based on the Hoek and Brown criterion, reproducing more realistic configurations than those offered by empirical or analytical solutions. The inputs included in the proposed ANN are rock type, uniaxial compressive strength, geological strength index, foundation width, dilatancy, bidimensional or axisymmetric problem, the roughness of the foundation-rock contact, and consideration or not of the self-weight of the rock mass. The predictions from the ANN model are in very good agreement with the numerical results, proving that it can be successfully employed to provide a very accurate assessment of the bearing capacity in a simpler and more accessible way than the existing methods.

scholarly journals Projected decrease in wintertime bearing capacity on different forest and soil types in Finland under a warming climate

2019 ◽  
Vol 23 (3) ◽  
pp. 1611-1631 ◽  
Author(s):  
Ilari Lehtonen ◽  
Ari Venäläinen ◽  
Matti Kämäräinen ◽  
Antti Asikainen ◽  
Juha Laitila ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
21St Century ◽  
Climate Model ◽  
Thick Layer ◽  
Timber Harvesting ◽  
Snow Accumulation ◽  
Point Of View ◽  
Frozen Soil ◽  
Soil Types ◽  
Soil Frost

Abstract. Trafficability in forest terrain is controlled by ground-bearing capacity, which is crucial from the timber harvesting point of view. In winter, soil frost affects the most the bearing capacity, especially on peatland soils which have in general low bearing capacity. Ground frost similarly affects the bearing capacity of forest truck roads. A 20 cm thick layer of frozen soil or 40 cm thick layer of snow on the ground may already be sufficient for heavy forest harvesters. In this work, we studied the impacts of climate change on soil frost conditions and, consequently, on ground-bearing capacity from the timber harvesting point of view. The number of days with good wintertime bearing capacity was modelled by using a soil temperature model with a snow accumulation model and wide set of downscaled climate model data until the end of the 21st century. The model was calibrated for different forest and soil types. The results show that by the mid-21st century, the conditions with good bearing capacity will decrease in wintertime in Finland, most likely by about 1 month. The decrease in soil frost and wintertime bearing capacity will be more pronounced during the latter half of the century, when drained peatlands may virtually lack soil frost in most of winters in southern and western Finland. The projected decrease in the bearing capacity, accompanied with increasing demand for wood harvesting from drained peatlands, induces a clear need for the development of sustainable and resource-efficient logging practices for drained peatlands. This is also needed to avoid unnecessary harvesting damages, like rut formation on soils and damage to tree roots and stems.

Sign in / Sign up

Export Citation Format

Share Document