scholarly journals Arc Plasma Deposited Copper and Gold Nanoparticles on FTO Substrate for Electrochemical Reduction of CO2

2019 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Gold Nanoparticles ◽  
Formic Acid ◽  
Electrochemical Reduction ◽  
High Efficiency ◽  
Plasma Deposition ◽  
Arc Plasma ◽  
Faradaic Efficiency ◽  
Electro Deposition ◽  
Electro Catalysis ◽  
Reduction Of Co2

A composite of copper and gold nanoparticles was deposited using arc plasma deposition on the conductive FTO substrate for the electrochemical reduction of CO2 . The use of arc plasma deposition system allows the nanoparticles to be implanted onto the substrate as opposed to the commonly used methods of vacuum deposition or electro deposition. This unique structure reduced the CO2 to produce formic acid with up to 60% faradaic efficiency. Copper and gold nanoparticles have never previously been reported to produce formic acid with such high efficiency, suggesting that the co-deposition technique of implanted nanoparticles can provide an interesting future avenue in the field of electrochemical reduction of CO2 . The surface analysis of the electrodes is presented here along with potential dependent faradaic efficiency of the electro catalysis.

scholarly journals Low-Overpotential Electrochemical Reduction of CO2 to Formic Acid on Surface-Modified Doped Tin Oxide Pellets

2019 ◽  
Author(s):  
Emmanuel Abdul ◽  
Jason Pitts ◽  
Deepak Rajput ◽  
Shankar Rananavare
Keyword(s):  
Formic Acid ◽  
Electrochemical Reduction ◽  
Current Density ◽  
Tin Oxide ◽  
Aqueous Media ◽  
Oxide Nanoparticles ◽  
Faradaic Efficiency ◽  
Electrode Potentials ◽  
Tin Oxide Nanoparticles ◽  
Reduction Of Co2

Gas sensors fabricated with antimony doped tin oxide (ATO) nanomaterials exhibit remarkable sensitivity for detecting oxidizing and reducing gases. This study highlights the enhanced selectivity and stability of the porous ATO nanomaterial electrode made for electrochemical reduction of CO2 in aqueous media. During electrochemical reduction, these electrodes prepared from compressed powders tend to crumble within a few hours in aqueous media. To overcome this electrode disintegration effect, we modified the surface of the doped tin-Oxide nanoparticles with Nafion and a dipodal silane (1,2-Bis(triethoxysilyl)ethane). The electrode characterization studies include Cyclic Voltammetry (CV), and Electrochemical Impedance Spectroscopy (EIS). Scanning electron microscopic investigation of electrode surface morphology and roughness before and after electrochemical CO2 reduction for derivatized and underivatized electrode revealed lower surface roughness for former than the latter.The derivatized electrodes allowed CO2 electrochemical reduction at low overpotentials and high current density without any electrode crumbling over more than 24 hours of continuous operation. Formate/formic acid and methanol were the major products of reduction at electrode potentials ranging from -0.4 to -1.0V vs. RHE in the CO2 saturated 0.1M KHCO3 electrolyte. Higher current density and Faradaic Efficiency of formic acid was observed when compared to planar tin electrode materials and tin oxide nanoparticles deposited on FTO glass.

Continuous Semi-Micro Reactor Prototype for the Electrochemical Reduction of CO2 into Formic Acid

2020 ◽  
Vol 59 (5) ◽  
pp. 1737-1745 ◽  
Author(s):  
Rupam Sinha ◽  
Agam Bisht ◽  
Saptak Rarotra ◽  
Tapas K. Mandal
Keyword(s):  
Formic Acid ◽  
Electrochemical Reduction ◽  
Reduction Of Co2 ◽  
Micro Reactor

scholarly journals Electrochemical reduction of CO2 to ethylene on Cu/CuxO-GO composites in aqueous solution

RSC Advances ◽  
2020 ◽  
Vol 10 (30) ◽  
pp. 17572-17581
Author(s):  
Nusrat Rashid ◽  
Mohsin Ahmad Bhat ◽  
U. K. Goutam ◽  
Pravin Popinand Ingole
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Electrochemical Reduction ◽  
Conversion Rate ◽  
Faradaic Efficiency ◽  
Reduction Of Co2

Herein, we present fabrication of graphene oxide supported Cu/CuxO nano-electrodeposits which efficiently and selectively can electroreduce CO2 into ethylene with a faradaic efficiency of 34% and conversion rate of 194 mmol g−1 h−1 at −0.985 V vs. RHE.

Polyvinyl alcohol-modified gold nanoparticles with record-high activity for electrochemical reduction of CO2 to CO

2019 ◽  
Vol 34 ◽  
pp. 108-114 ◽  
Author(s):  
Lushan Ma ◽  
Weibo Hu ◽  
Qingguang Pan ◽  
Liangliang Zou ◽  
Zhiqing Zou ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Polyvinyl Alcohol ◽  
High Activity ◽  
Electrochemical Reduction ◽  
Reduction Of Co2

scholarly journals Continuous Electrochemical Reduction of CO2 to Formate: Comparative Study of the Influence of the Electrode Configuration with Sn and Bi-Based Electrocatalysts

Molecules ◽  
2020 ◽  
Vol 25 (19) ◽  
pp. 4457 ◽  
Author(s):  
Guillermo Díaz-Sainz ◽  
Manuel Alvarez-Guerra ◽  
Angel Irabien
Keyword(s):  
Formic Acid ◽  
Raw Materials ◽  
Value Added ◽  
Gas Diffusion ◽  
Faradaic Efficiency ◽  
Co2 Electroreduction ◽  
Current Densities ◽  
Reduction Of Co2 ◽  
Value Added Products ◽  
Electrocatalytic Reduction Of Co2

Climate change has become one of the most important challenges in the 21st century, and the electroreduction of CO2 to value-added products has gained increasing importance in recent years. In this context, formic acid or formate are interesting products because they could be used as raw materials in several industries as well as promising fuels in fuel cells. Despite the great number of studies published in the field of the electrocatalytic reduction of CO2 to formic acid/formate working with electrocatalysts of different nature and electrode configurations, few of them are focused on the comparison of different electrocatalyst materials and electrode configurations. Therefore, this work aims at presenting a rigorous and comprehensive comparative assessment of different experimental data previously published after many years of research in different working electrode configurations and electrocatalysts in a continuous mode with a single pass of the inputs through the reactor. Thus, the behavior of the CO2 electroreduction to formate is compared operating with Sn and Bi-based materials under Gas Diffusion Electrodes (GDEs) and Catalyst Coated Membrane Electrodes (CCMEs) configurations. Considering the same electrocatalyst, the use of CCMEs improves the performance in terms of formate concentration and energy consumption. Nevertheless, higher formate rates can be achieved with GDEs because they allow operation at higher current densities of up to 300 mA·cm−2. Bi-based-GDEs outperformed Sn-GDEs in all the figures of merit considered. The comparison also highlights that in CCME configuration, the employ of Bi-based-electrodes enhanced the behavior of the process, increasing the formate concentration by 35% and the Faradaic efficiency by 11%.

scholarly journals High-Pressure Electrochemical Reduction of CO2 to Formic Acid/Formate: Effect of pH on the Downstream Separation Process and Economics

2019 ◽  
Vol 58 (51) ◽  
pp. 22718-22740 ◽  
Author(s):  
Mahinder Ramdin ◽  
Andrew R. T. Morrison ◽  
Mariette de Groen ◽  
Rien van Haperen ◽  
Robert de Kler ◽  
...  
Keyword(s):  
High Pressure ◽  
Formic Acid ◽  
Electrochemical Reduction ◽  
Separation Process ◽  
Effect Of Ph ◽  
Reduction Of Co2
Sign in / Sign up

Export Citation Format

Share Document