scholarly journals Heterogeneous transesterification of castor oil for biodiesel production by Al2O3, Al2O3-NiO and Al2O3-CoO modified bentonite as catalyst

2020 ◽  
Vol 65 (9) ◽  
pp. 825-837
Author(s):  
Radjaa EL AHMAR ◽  
◽  
Charef HARRATS ◽  
Djillali BASSOU ◽  
Soufi KACIMI ◽  
...  

Bentonite clay from Maghnia (Algeria), very rich in montmorillonite (~ 90 %) purified and intercalated with pillars Al2O3, Al2O3-NiO and Al2O3-CoO, was applied as catalyst for the conversion of a mixture of castor oil-ethanol to biodiesel. The pillared clay with Al2O3-CoO (10%) led to 98% ester conversion. The highest yield of biodiesel production was obtained at 1/15 molar ratio of oil/ethanol, a temperature of 250 °C and 7.5 wt% of catalyst. This behaviour was ascribed to a synergetic effect of the largest surface area developed in the clay and the highest catalytic activity of cobalt in basic medium. The catalysts re-usability experiments revealed that the pillared clays were safely re-used three times without losing their original catalytic effectiveness. The kinetics calculations demonstrated that the transesterification of castor oil in an excess of alcohol using the pillared clay as catalyst followed a pseudo first order kinetics. The biodiesel produced exhibited comparable fuel properties as those of classical fossil diesel.

2013 ◽  
Vol 864-867 ◽  
pp. 96-100
Author(s):  
Shen Xin Li ◽  
Wei Hu ◽  
Ying Wang ◽  
Jian Zhang Li ◽  
Cheng Duan Wang

The phenol oxidation with persulfate catalyzed were studied. Effects of several parameters, such as dose of oxidant, pH, temperature and UV irradiation, were investigated in detail. The results showed that the phenol oxidation by persulfate could be fitted to a pseudo-first order kinetics model. The optimum acidity of the phenol oxidation system in the paper is ca. pH 8.76, the optimum temperature which is ca.70 °C and the optimum molar ratio of persulfate to the phenol is ca.40 in the solution.The results are useful for the treatment of industrial wastewater. Key words: Phenol oxidation Schiff base manganese (III) complexes Persulfate


2019 ◽  
Vol 800 ◽  
pp. 83-87
Author(s):  
Valdis Kampars ◽  
Reinis Gravins ◽  
Kristine Lazdovica

By the investigation and comparison of different interesterification reactions at fixed reaction time researchers usually selected 1 hour as a characteristic time for the synthesis stage of industrial biodiesel production. Investigation performed in this work shows that the equilibrium of interesterification reaction mixture of rapeseed oil with methyl acetate in molar ration of 1:18 in presence of potassium tert-butoxide in tert-butanol at molar ratio to oil 0.08 at 25 °C reach the equilibrium approximately after 50 min but at 55 °C after 10 min. The equilibrium compositions of the reaction mixtures at different temperatures are different. The concentrations of TG, FAME and TA during the interesterification reaction at 25 °C obey the pseudo-first order law which do not reflect the stoichiometry of this multiple elementary steps reaction.


2017 ◽  
Vol 727 ◽  
pp. 388-394 ◽  
Author(s):  
Wei Liang Wang ◽  
Chuan Xi Yang ◽  
Feng Zhang ◽  
Ping Li ◽  
Guan Wei Cui

The ZnO nanorod was synthesized by the hydrothermal method, and Cu/ZnO nanorod was synthesized by modifying the prepared ZnO nanorod. The TEM was used to characterize the morphology and microstructure for ZnO and Cu/ZnO nanorod. The length of nanorod ZnO was about 700-800 nm, and the diameter about 40-50 nm. There was no change of ZnO in length and diameter when doped with Cu. The degradation of methylene blue (MB) in an aqueous solution under sunlight irradiation was carried out to evaluate the photocatalytic activity. The Cu/ZnO nanorod shows significantly higher photocatalytic activity (99.91%) than ZnO nanorod (89.66%) under sunlight irradiation. The degradation of MB accords with pseudo-first order kinetics, and the appear rate constants kapp of 7% Cu/ZnO nanorod was about 3 times higher than ZnO nanorod. The synergetic effect between ZnO nanorod and Cu on the photocatalytic degradation of MB exists clearly for all the nanorods, and the optimum synergetic effect was found at a weight ratio of 7 wt % (Cu/ZnO). It hoped our works could provide valuable information on the synthesis and application of ZnO-based heterogeneous photocatalysis.


2020 ◽  
Vol 16 ◽  
Author(s):  
M. Alarjah

Background: Prodrugs principle is widely used to improve the pharmacological and pharmacokinetic properties of some active drugs. Much effort was made to develop metronidazole prodrugs to enhance antibacterial activity and or to improve pharmacokinetic properties of the molecule or to lower the adverse effects of metronidazole. Objective: In this work, the pharmacokinetic properties of some of monoterpenes and eugenol pro metronidazole molecules that were developed earlier were evaluated in-vitro. The kinetic hydrolysis rate constants and half-life time estimation of the new metronidazole derivatives were calculated using the validated RP-HPLC method. Method: Chromatographic analysis was done using Zorbbax Eclipse eXtra Dense Bonding (XDB)-C18 column of dimensions (250 mm, 4.6 mm, 5 μm), at ambient column temperature. The mobile phase was a mixture of sodium dihydrogen phosphate buffer of pH 4.5 and methanol in gradient elution, at 1ml/min flow rate. The method was fully validated according to the International Council for Harmonization (ICH) guidelines. The hydrolysis process carried out in an acidic buffer pH 1.2 and in an alkaline buffer pH 7.4 in a thermostatic bath at 37ºC. Results: The results followed pseudo-first-order kinetics. All metronidazole prodrugs were stable in the acidic pH, while they were hydrolysed in the alkaline buffer within a few hours (6-8 hr). The rate constant and half-life values were calculated, and their values were found to be 0.082- 0.117 hr-1 and 5.9- 8.5 hr., respectively. Conclusion: The developed method was accurate, sensitive, and selective for the prodrugs. For most of the prodrugs, the hydrolysis followed pseudo-first-order kinetics; the method might be utilised to conduct an in-vivo study for the metronidazole derivatives with monoterpenes and eugenol.


2021 ◽  
Vol 02 ◽  
Author(s):  
Emmanuel M. de la Fournière ◽  
Jorge M. Meichtry ◽  
Graciela S. Custo ◽  
Eduardo A. Gautier ◽  
Marta I. Litter

Background: Thiomersal (TM), a complex between 2-mercaptobenzoic acid (2-MBA) and ethylmercury (C2H5Hg+), is an antimicrobial preservative used in immunological, ophthalmic, cosmetic products, and vaccines. Objective: TM has been treated by UV/TiO2 photocatalysis in the presence or absence of oxygen at acidic pH. C2H5Hg+, 2-MBA, and 2-sulfobenzoic acid (2-SBA) were found as products. A 2-SBA photocatalytic treatment was undertaken to study sulfur evolution. Methods: Photocatalytic runs were performed using a UVA lamp (λmax = 352 nm), open to the air or under N2. A suspension of the corresponding TM or 2-SBA salt and TiO2 was prepared, and pH was adjusted. Suspensions were stirred in the dark for 30 min and then irradiated. TM, 2-MBA, 2-SBA, and C2H5Hg+ were quantified by HPLC, sulfur by TXRF, and the deposits on the photocatalyst were analyzed by chemical reactions. The mineralization degree was followed by TOC. Sulfate was determined using BaCl2 at 580 nm. Results: Photocatalytic destruction of TM and total C2H5Hg+ was complete under N2 and air, but TM degradation was much faster in air. The evolution of TM and the products followed a pseudo-first-order kinetics. Conclusion: TiO2-photocatalytic degradation is a suitable technique for the treatment of TM and its degradation products. In contrast to other organomercurial compounds, TM degradation is faster in the presence of O2, indicating that the oxidative mechanism is the preferred pathway. A significant TM mineralization (> 60%, NPOC and total S) was obtained. TM was more easily degraded than 2-SBA. Sulfate was the final product.


2014 ◽  
Vol 31 (2) ◽  
pp. 90 ◽  
Author(s):  
S Ismail ◽  
S. A Abu ◽  
R Rezaur ◽  
H Sinin

In this study, the optimum biodiesel conversion from crude castor oil to castor biodiesel (CB) through transesterification method was investigated. The base catalyzed transesterification under different reactant proportion such as the molar ratio of alcohol to oil and mass ratio of catalyst to oil was studied for optimum production of castor biodiesel. The optimum condition for base catalyzed transesterification of castor oil was determined to be 1:4.5 of oil to methanol ratio and 0.005:1 of potassium hydroxide to oil ratio. The fuel properties of the produced CB such as the calorific value, flash point and density were analyzed and compared to conventional diesel. Diesel engine performance and emission test on different CB blends proved that CB was suitable to be used as diesel blends. CB was also proved to have lower emission compared to conventional diesel.


Author(s):  
Zhiliang Zhang ◽  
Jiaqi Lu ◽  
Bingqian Lv ◽  
Wei Liu ◽  
Shuyuan Shen ◽  
...  

The gas-liquid jet flow was proved to be capable of inducing chemical consequences which can lead to the decomposition of methylene blue (MB). The reaction process follows a pseudo-first-order kinetics....


1996 ◽  
Vol 314 (3) ◽  
pp. 985-991 ◽  
Author(s):  
Subrata ADAK ◽  
Abhijit MAZUMDER ◽  
Ranajit K. BANERJEE

The plausible role of arginine and tyrosine residues at the active site of horseradish peroxidase (HRP) in aromatic donor (guaiacol) oxidation was probed by chemical modification followed by characterization of the modified enzyme. The arginine-specific reagents phenylglyoxal (PGO), 2,3-butanedione and 1,2-cyclohexanedione all inactivated the enzyme, following pseudo-first-order kinetics with second-order rate constants of 24 M-1·min-1, 0.8 M-1·min-1 and 0.54 M-1·min-1 respectively. Modification with tetranitromethane, a tyrosine-specific reagent, also resulted in 50% loss of activity following pseudo-first-order kinetics with a second-order rate constant of 2.0 M-1·min-1. The substrate, H2O2, and electron donors such as I- and SCN- offered no protection against inactivation by both types of modifier, whereas the enzyme was completely protected by guaiacol or o-dianisidine, an aromatic electron donor (second substrate) oxidized by the enzyme. These studies indicate the involvement of arginine and tyrosine residues at the aromatic donor site of HRP. The guaiacol-protected phenylglyoxal-modified enzyme showed almost the same binding parameter (Kd) as the native enzyme, and a similar free energy change (∆G´) for the binding of the donor. Stoicheiometric studies with [7-14C]phenylglyoxal showed incorporation of 2 mol of phenylglyoxal per mol of enzyme, indicating modification of one arginine residue for complete inactivation. The difference absorption spectrum of the tetranitromethane-modified against the native enzyme showed a peak at 428 nm, characteristic of the nitrotyrosyl residue, that was abolished by treatment with sodium dithionite, indicating specific modification of a tyrosine residue. Inactivation stoicheiometry showed that modification of one tyrosine residue per enzyme caused 50% inactivation. Binding studies by optical difference spectroscopy indicated that the arginine-modified enzyme could not bind guaiacol at all, whereas the tyrosine-modified enzyme bound it with reduced affinity (Kd 35 mM compared with 10 mM for the native enzyme). Both the modified enzymes, however, retained the property of the formation of compound II (one-electron oxidation state higher than native ferriperoxidase) with H2O2, but reduction of compound II to native enzyme by guaiacol did not occur in the PGO-modified enzyme, owing to lack of binding. No non-specific change in protein structure due to modification was evident from circular dichroism studies. We therefore suggest that the active site of HRP for aromatic donor oxidation is composed of an arginine and an adjacent tyrosine residue, of which the former plays an obligatory role in aromatic donor binding whereas the latter residue plays a facilitatory role, presumably by hydrophobic interaction or hydrogen bonding.


1950 ◽  
Vol 33 (6) ◽  
pp. 703-722 ◽  
Author(s):  
C. W. Sheppard ◽  
W. R. Martin

The exchange of potassium between cells and plasma of heparinized human blood has been studied in vitro using the radioactive isotope K42. The changes in cell and plasma specific activity are characteristic of a simple two-compartment system. The mean of seven determinations of the exchange rate at 38°C. is 1.8 per cent of the cellular potassium per hour. The results indicate that at 38°C. the rate is relatively insensitive to oxygenation or reduction of the hemoglobin, and to 1200 r of gamma radiation. With varying temperature the rate follows pseudo first order kinetics with a Q10 of 2.35. Below 15°C. the rate of loss of potassium exceeds the rate of uptake.


1991 ◽  
Vol 278 (2) ◽  
pp. 595-599 ◽  
Author(s):  
N Hirano ◽  
T Ichiba ◽  
A Hachimori

Treatment of the inorganic pyrophosphatase from thermophilic bacterium PS-3 with diethyl pyrocarbonate resulted in the almost complete loss of its activity, which followed pseudo-first-order kinetics. The presence of Mg2+ prevented the inactivation. Enzyme inactivated with diethyl pyrocarbonate was re-activated by hydroxylamine. The inactivation parallelled the amount of modified histidine residue, and a plot of the activity remaining against the amount of modified histidine residue suggested that the modification of one of two histidine residues totally inactivated the enzyme. The site involved was found to be located in a single lysyl endopeptidase-digest peptide derived from the ethoxy[14C]carbonylated enzyme. Amino acid analysis and sequence analysis of the peptide revealed that it comprised residues 96-119 of the inorganic pyrophosphatase from thermophilic bacterium PS-3. These results, when compared with those reported for the Escherichia coli and yeast enzymes, imply that His-118 of the inorganic pyrophosphatase from thermophilic bacterium PS-3 is located near the Mg(2+)-binding site and thus affects the binding of Mg2+.


Sign in / Sign up

Export Citation Format

Share Document