Synthesis and Structural evaluation of Mg, Cu, Zn tri-doped lithium titanium oxide electrode materials for use in lithium ion battery

2020 ◽  
Vol 11 (1) ◽  
pp. 1-8
Author(s):  
Parbhej Ahamed ◽  
Mohammad Abu Yousuf
Keyword(s):  
Infrared Spectroscopy ◽  
Band Gap ◽  
Electrode Materials ◽  
Morphological Characteristics ◽  
Band Gap Energy ◽  
Energy Calculation ◽  
Visible Spectroscopy ◽  
Gap Energy ◽  
Uv Visible ◽  
Cu And Zn

Mg, Cu and Zn metals have been used to tri-dope into the tetrahedral and octahedral sites of Li4Ti5O12 (LTO) electrode materials usually used in Li-ion battery. Li4-xMgxTi5-yZny/2Cuy/2O12 (i. x = 0, y = 0 ii. x = 0.05, y=0.10 iii. x= 0.10, y= 0.20 iv. x= 0.15, y= 0.20) materials were synthesized by solid state reaction using the stoichiometric amount of raw materials. The structural and morphological characteristics of the tri-doped Li4-xMgxTi5-yZny/2Cuy/2O12 materials were methodically analyzed by using Fourier transform infrared spectroscopy (FT-IR), UV-visible spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopic (SEM) techniques. The results of infrared spectroscopy exhibit bands of TO6 octahedra and Ti-O-Ti vibrations. Band gap energy calculation from UV-visible spectroscopy demonstrates a critical point of doping. Beyond this point band gap energy has been found to increase upon tri-doping. It has been observed from SEM images that all samples possess micro-porous and coral shape structures. The XRD patterns demonstrate that Mg, Cu and Zn metals tri-doped Li4-xMgxTi5-yZny/2Cuy/2O12 materials have spinel structure as well as good crystallinity. Journal of Engineering Science 11(1), 2020, 01-08

scholarly journals Silica Supported Copper-Nickel Oxide Catalyst for Photodegradation of Methylene Blue

2019 ◽  
Vol 31 (12) ◽  
pp. 2891-2896
Author(s):  
A.K. Prodjosantoso ◽  
S. Kamilia ◽  
M.P. Utomo ◽  
K.S. Budiasih
Keyword(s):  
Methylene Blue ◽  
Oxide Catalyst ◽  
Catalyst Activity ◽  
Band Gap Energy ◽  
Organic Wastes ◽  
Visible Spectroscopy ◽  
Gap Energy ◽  
Langmuir Adsorption ◽  
Activity Test ◽  
Uv Visible

Organic wastes are often harmful for organisms living in water. The compounds may toxic and or carcinogenic. Many methods have been applied to minimize the organic wastes in water, one of which is through fotodegradation process using catalysts. This report is about the use of (Cu-Ni)Ox@SiO2 catalyst for photodegration the methylene blue under the sunlight exposure. A serial method of XRD, SEM-EDX and UV-visible spectroscopy has been used in the study. The catalyst adsorption test was carried out in the dark environment, whilst the catalyst activity test in photodegradation of methylene blue was performed under the sunlight. The measurements on (Cu-Ni)Ox@SiO2 catalyst clearly indicate the presence of tridymite silica (SiO2) with the particle size around 9 nm. The silica band gap energy decreases with the adsorption of copper and nickel on the surface of silica. The adsorption follows the Langmuir adsorption isotherm. The (Cu-Ni)Ox@SiO2 is significantly catalyzed the degradation of methylene blue in water.

Effect of 2,4-dinitrophenol dye doping on tristhioureazinc(II) sulfate single crystals: a potential nonlinear optical material

2020 ◽  
Vol 53 (4) ◽  
pp. 972-981 ◽  
Author(s):  
G. Durgababu ◽  
G. J. Nagaraju ◽  
G. Bhagavannarayana
Keyword(s):  
Crystal Structure ◽  
Band Gap ◽  
Single Crystals ◽  
Nonlinear Optical ◽  
Optical Band Gap ◽  
Band Gap Energy ◽  
Optical Range ◽  
Gap Energy ◽  
Uv Visible ◽  
Crystalline Matrix

Good quality single crystals of 2,4-dinitrophenol (DNP)-doped tristhioureazinc(II) sulfate (ZTS) were successfully grown by employing the simple and cost effective slow-evaporation solution technique. To study the effect of doping on various device properties, the grown single crystals were subjected to powder X-ray diffraction (PXRD), high-resolution XRD, thermogravimetric analysis (TGA), Vickers hardness testing, and UV–visible, photoluminescence (PL) and Fourier transform IR (FTIR) spectroscopy techniques. The crystal structure of DNP-doped ZTS bulk single crystals remained the same as the crystal structure of ZTS. However, the changes in intensities of the diffraction peaks in the PXRD spectra indicated the incorporation of dopants into the crystalline matrix. FTIR studies confirm the incorporation of dopants into the crystalline matrix, shown by the shifting of certain prominent absorption bands towards higher energy. This also indicated the induced useful strain due to doping, leading to charge transfer and the enhancement of nonlinear optical properties. The cut-off wavelength and optical band gap energy of pure ZTS and DNP-doped ZTS crystals were studied by UV–visible absorption spectroscopy, revealing a slight reduction in the optical band gap energy due to doping, which in turn revealed the enhancement of the optical range. PL studies revealed an enhanced optical range of photoluminescence in ZTS crystals. Second harmonic generation (SGH) studies carried out by the Kurtz powder technique revealed the enhancement of SHG value due to DNP doping. To ensure the thermal stability and mechanical strength of the grown crystals with doping (required from the point of view of device applications), TGA and Vicker's hardness studies were performed.

Physico-Chemical Properties of CuO Thin Films Deposited by Spray Pyrolysis

2017 ◽  
Vol 895 ◽  
pp. 33-36 ◽  
Author(s):  
Bouzid Boudjema ◽  
Radouane Daira ◽  
Abdenour Kabir ◽  
Rafika Djebien
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Electrical Resistivity ◽  
Band Gap ◽  
Spray Pyrolysis ◽  
Copper Chloride ◽  
Band Gap Energy ◽  
Spray Pyrolysis Method ◽  
Gap Energy ◽  
Uv Visible

Our work consists to the deposition of copper oxide (CuO) thin films onto glass substrates by the spray pyrolysis method. The precursor solution was copper chloride of 0.1 M and the deposition rate was 5 ml/h. The time of spray varied between 5 and 20 min and the substrate temperature was kept at 350°C. The structural, optical and electrical properties of CuO films were investigated, as a function of the spray time, by X-ray diffraction (XRD), Raman scattering, UV-visible spectroscopy in addition to the measurements of the thickness and the electrical resistivity. The obtained results indicated that our films were polycrystalline with a preferential orientation along the (111) planes. The peaks intensity as well as the grain size increased as a function of the spray time indicating the improvement of the films crystalline structure. The Raman spectroscopy confirmed the formation of the CuO phase. The UV-visible transmission varied between 36% and 53% and the band gap energy decreased from 2 to 1.72 eV as a function of the spray time. The electrical resistivity of the films decreased from 514 to 72 kΩcm and correlated with the decrease of the band gap energy and the increase of the grain size.

scholarly journals Optical Characteristics of Some Binary and Ternary Phosphate Glasses

1995 ◽  
Vol 48 (5) ◽  
pp. 887 ◽  
Author(s):  
M Ashraf Chaudhry ◽  
Anwar Manzoor Rana ◽  
M Altaf ◽  
M Shakeel Bilal
Keyword(s):  
Band Gap ◽  
Optical Band Gap ◽  
Glass Composition ◽  
Visible Region ◽  
Band Gap Energy ◽  
Phosphate Glasses ◽  
Optical Absorption Spectra ◽  
Gap Energy ◽  
Sharp Edges ◽  
Uv Visible

The optical absorption spectra of some binary and ternary phosphate glasses are studied in the UV-visible region by using a spectrophotometer. The observed absorbance versus wavelength curves do not show any sharp edges in these glasses. The optical band gap energies are found to depend significantly on glass composition. The optical band gap energy is found to increase with increasing ZnO content in binary and ternary glass systems.

Modification of optical properties of PC-PBT/Cr2O3 and PC-PBT/CdS nanocomposites by gamma irradiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20402
Author(s):  
Kaoutar Benthami ◽  
Mai ME. Barakat ◽  
Samir A. Nouh
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Color Difference ◽  
Band Gap Energy ◽  
Polybutylene Terephthalate ◽  
Γ Irradiation ◽  
Gap Energy ◽  
Vis Spectroscopy ◽  
Oxygen Atoms

Nanocomposite (NCP) films of polycarbonate-polybutylene terephthalate (PC-PBT) blend as a host material to Cr2O3 and CdS nanoparticles (NPs) were fabricated by both thermolysis and casting techniques. Samples from the PC-PBT/Cr2O3 and PC-PBT/CdS NCPs were irradiated using different doses (20–110 kGy) of γ radiation. The induced modifications in the optical properties of the γ irradiated NCPs have been studied as a function of γ dose using UV Vis spectroscopy and CIE color difference method. Optical dielectric loss and Tauc's model were used to estimate the optical band gaps of the NCP films and to identify the types of electronic transition. The value of optical band gap energy of PC-PBT/Cr2O3 NCP was reduced from 3.23 to 3.06 upon γ irradiation up to 110 kGy, while it decreased from 4.26 to 4.14 eV for PC-PBT/CdS NCP, indicating the growth of disordered phase in both NCPs. This was accompanied by a rise in the refractive index for both the PC-PBT/Cr2O3 and PC-PBT/CdS NCP films, leading to an enhancement in their isotropic nature. The Cr2O3 NPs were found to be more effective in changing the band gap energy and refractive index due to the presence of excess oxygen atoms that help with the oxygen atoms of the carbonyl group in increasing the chance of covalent bonds formation between the NPs and the PC-PBT blend. Moreover, the color intensity, ΔE has been computed; results show that both the two synthesized NCPs have a response to color alteration by γ irradiation, but the PC-PBT/Cr2O3 has a more response since the values of ΔE achieved a significant color difference >5 which is an acceptable match in commercial reproduction on printing presses. According to the resulting enhancement in the optical characteristics of the developed NCPs, they can be a suitable candidate as activate materials in optoelectronic devices, or shielding sheets for solar cells.

Stability Investigation in the Optical Properties of Thermally Evaporated Ge5Se95-x Znx Thin Films

2015 ◽  
Vol 7 (3) ◽  
pp. 1923-1930
Author(s):  
Austine Amukayia Mulama ◽  
Julius Mwakondo Mwabora ◽  
Andrew Odhiambo Oduor ◽  
Cosmas Mulwa Muiva ◽  
Boniface Muthoka ◽  
...  
Keyword(s):  
Thin Films ◽  
Band Gap ◽  
Optical Band Gap ◽  
Thermal Evaporation ◽  
Optical Transition ◽  
Bulk Material ◽  
Band Gap Energy ◽  
Optical Absorbance ◽  
Gap Energy ◽  
Constituent Elements

 Selenium-based chalcogenides are useful in telecommunication devices like infrared optics and threshold switching devices. The investigated system of Ge5Se95-xZnx (0.0 ≤ x ≤ 4 at.%) has been prepared from high purity constituent elements. Thin films from the bulk material were deposited by vacuum thermal evaporation. Optical absorbance measurements have been performed on the as-deposited thin films using transmission spectra. The allowed optical transition was found to be indirect and the corresponding band gap energy determined. The variation of optical band gap energy with the average coordination number has also been investigated based on the chemical bonding between the constituents and the rigidity behaviour of the system’s network.

scholarly journals Polymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1118
Author(s):  
Ibrahim Mustapha Alibe ◽  
Khamirul Amin Matori ◽  
Mohd Hafiz Mohd Zaid ◽  
Salisu Nasir ◽  
Ali Mustapha Alibe ◽  
...  
Keyword(s):  
Solid State ◽  
Thermal Treatment ◽  
Band Gap ◽  
Optical Band Gap ◽  
Dopant Concentration ◽  
Blue Emission ◽  
Green Emission ◽  
Band Gap Energy ◽  
Solid State Lighting ◽  
Gap Energy

The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.

Sign in / Sign up

Export Citation Format

Share Document