scholarly journals Effect of seed rate and row spacing on grain yield of sorghum

2018 ◽  
Vol 15 (2) ◽  
pp. 81-91
Author(s):  
MR Gondal ◽  
A Hussain ◽  
S Yasin ◽  
M Musa ◽  
HS Rehman
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Plant Density ◽  
Morphological Changes ◽  
Grain Weight ◽  
Stem Diameter ◽  
Row Spacing ◽  
Seeding Rate ◽  
Seed Rate ◽  
1000 Grain Weight

An experiment to investigate the effect of seed rate (5, 7.5, 10, 12.5 and 15 kg ha-1) and row spacing (30, 45 and 60cm) on agronomic characteristics of plants including stem densitym-2, plant height, stem diameter, number of heads m-2, number of heads per plant, number of grains per head, 1000-grain weight and grain yield was conducted using the cultivar “Sorghum 2011” for two years 2016 and 2017. Seed rates and row spacing had significant effect on plant height, plant density m-2, number of heads m-2, number of grains per head and grain yield. Row spacing had non-significant effect on stem diameter, number of heads per plant and 1000-grain weight. Row spacing at 30 cm produced the highest number of plants m-2 and plant height. Plant height increased with increase in seed rate in all the row spacing. Stem diameter decreased with increase in the seed rate and row spacing. Narrow row spacing (30 cm) and low seeding rate (5 kg ha-1) produced the maximum grain yield consistently during both years. Lower yields were recorded in the treatments having greater row spacing (60 cm) and higher seed rates (7.5, 10, 12.5 & 15 kg ha-1). Higher seed rates and wider row spacing induced morphological changes rendering plants to lodging.SAARC J. Agri., 15(2): 81-91 (2017)

scholarly journals APPLICATION OF DIFFERENT SOURCES AND DOSES OF BORON IN THE CORN CROP

2020 ◽  
Vol 7 (4) ◽  
pp. 23-28
Author(s):  
Angela Oliveira Silva ◽  
Wilian Henrique Diniz Buso
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Grain Weight ◽  
Stem Diameter ◽  
Nutrient Sources ◽  
Randomized Block Design ◽  
The One ◽  
Different Sources ◽  
1000 Grain Weight

One of the main problems faced in corn cultivation, especially in Cerrado regions, is the deficiency of micronutrients. Among the micronutrients essential for the development of plants, boron (B) stands out for participating in a series of physiological processes. Based on this, the present work aimed to evaluate the performance of corn under fertilization with different sources and doses of boron. The randomized block design in a 4x3 factorial scheme was used. Four boron doses (0, 1, 2, and 3 kg ha-1) and three nutrient sources (boric acid, borax, and ulexite), applied in topdressing, were evaluated. Plant height (cm), stem diameter (mm), first ear insertion height (m), ear length (cm), ear diameter (mm), number of rows per ear, number of grains per row, 1000-grain weight (g), and grain yield (kg ha-1) were evaluated. It was concluded that the boron sources and doses used did not influence the results of plant height, first ear insertion height, number of rows per ear, and grain yield. The three doses evaluated provided increases in stem diameter, with a dose of 2.08 kg ha-1 being the one with the highest average. The application of borax and ulexite results in higher values of ear diameter, number of grains per row, and 1000-grain weight. The dose of 1.74 kg ha-1 of boron provides the highest 1000-grain weight.

scholarly journals YIELD AND DEVELOPMENT OF MUNG BEAN ACCORDING TO THE PLANT DENSITY

2019 ◽  
Vol 6 (4) ◽  
pp. 14-20 ◽  
Author(s):  
Edvan Costa da Silva ◽  
Nei Peixoto ◽  
Natália Arruda ◽  
Natália Cássia de Faria Ferreira ◽  
Luís Augusto Batista de Oliveira
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Mung Bean ◽  
Plant Density ◽  
Plant Population ◽  
Stem Diameter ◽  
Row Spacing ◽  
Optimal Population ◽  
Pod Length ◽  
Bean Crop

The study aimed to determine the optimal population density for mung bean crop by defining row spacing, and number of plants per meter. The experimental design was a randomized block with treatments arranged in a split-plot scheme with four replications. Two row spacings (25 and 50 cm) were allocated in the plots, and six number of plants per meter (4, 8, 12, 16, 20, and 24 plants) were allocated in the subplots. The experimental units had 4.0 m long, and 2.5 m wide, with 4.0 m2 of useful area. In the useful area of plot, plant height, stem diameter, number of pods per plot, pod length, pod width, number of grains per pod, 100-pods weight, 100-grains weight, final plant population, and grain yield were evaluated. Plant height, pod length, pod width, number of grains per pod, and 100-pod weight were not influenced by row spacing and number of plants per meter. There was influence of significant interaction between the factors studied on 100-grains weight and final plant population. There was a significant effect only of number of plants per meter on stem diameter, number of pods per plot, and grain yield. The row spacing of 50 cm and 24 plants per meter increased mung bean grain yield, revealing itself as a strategy of gain in the grain yield of the crop.

Study onGenetic Variability, Heritability and Genetic Advance for Seed Yield and Component Traits in Rice

2017 ◽  
Vol 4 (03) ◽  
Author(s):  
PUNIT KUMAR ◽  
VICHITRA KUMAR ARYA ◽  
PRADEEP KUMAR ◽  
LOKENDRA KUMAR ◽  
JOGENDRA SINGH
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Seed Yield ◽  
Flag Leaf ◽  
Grain Weight ◽  
Major Influence ◽  
Genetic Advance ◽  
Component Traits ◽  
Biological Yield ◽  
1000 Grain Weight

A study on genetic variability, heritability and genetic advance for seed yield and component traits was made in 40 genotypes of riceduring kharif 2011-2012 at SHIATS, Allahabad. The analysis of variance showed highly significant differences among the treatments for all the 13 traits under study.The genotypes namely CN 1446-5-8-17-1-MLD4 and CR 2706 recorded highest mean performance for panicles per hill and grain yield. The highest genotypic and phenotypic variances (VG and VP) were recorded for spikelets per panicle (3595.78 and 3642.41) followed by biological yield (355.72 and 360.62) and plant height (231.48 and 234.35).High heritability (broad sense) coupled with high genetic advance was observed for plant height, flag leaf length, panicles per hill, tillers per hill, days to maturity, spikelet’s per panicle, biological yield, harvest index, 1000 grain weight and grain yield, indicating that selection will be effective based on these traits because they were under the influence of additive and additive x additive type of gene action. Highest coefficient of variation (PCV and GCV) was recorded for tillers per hill (18.42% and 17.23%), panicle per hill (19.76 % and 18.68%), spikelet’s per panicle (34.30 and34.07 %), biological yield (28.31 % and 28.12 %), 1000 grain weight (15.57 % and 15 31 %) and grain yield (46.66% and 23.54 %), indicating that these traits are under the major influence of genetic control, therefore the above mentioned traits contributed maximum to higher grain yield compared to other traits, indicating grain yield improvement through the associated traits.

scholarly journals Effect of level of irrigation and nitrogen rate on yield performance of late sown wheat

2018 ◽  
Vol 29 (3) ◽  
pp. 213-220
Author(s):  
S Kazi ◽  
SU Bhuiya ◽  
AK Hasan ◽  
RR Rajib ◽  
ABMR Rahman ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Harvest Index ◽  
Grain Weight ◽  
Spike Length ◽  
High Dose ◽  
Nitrogen Rate ◽  
Irrigation Level ◽  
1000 Grain Weight ◽  
Late Sowing

The experiment was at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh–2202 during late Rabi season (December-March) of 2015. It was two factorial experiment (1) irrigation level and (2) nitrogen rate. Irrigation significantly influenced on yield and yield contributing characters except harvest index. The highest plant height (79.69cm), maximum number of total tillers plant-1 (4.725), number of grains spike-1 (40.61), spike length (11.80cm), 1000 grain weight (28.67g), grain yield (3.227 t ha-1), harvest index (41.26%) were obtained by mulching treatment. Nitrogen rate significantly influenced the yield and yield contributing characters. The highest plant height (80.37cm), maximum number of total tillers plant-1 (5.124), number of grains spike-1 (40.85), spike length (10.37cm), 1000 grain weight (31.86g), grain yield (3.792 t ha-1), harvest index (41.69%) were obtained by the application of 180 kg N ha-1. The combined effect of Irrigation and nitrogen significantly interacted on yield and yield contributing characters. The highest plant height (83.44cm), number of total tillers plant-1 (5.66), number of grains spike-1 (41.60), 1000 grain weight (36.66g), grain yield (4.32 t ha-1) and harvest index (47.36%) were obtained by application of 180 kg N ha-1 with mulching. The present study revealed that high dose of nitrogen 180 kg ha-1 and mulching practice can compensate low production of wheat even at late sowing. Progressive Agriculture 29 (3): 213-220, 2018

scholarly journals Row spacing, plant density, sowing and harvest times for sweet sorghum1

2017 ◽  
Vol 47 (4) ◽  
pp. 408-415 ◽  
Author(s):  
Josefa Maria Francieli da Silva ◽  
Alek Sandro Dutra ◽  
Felipe Thomaz da Camara ◽  
Antônio Alves Pinto ◽  
Francisco Edson da Silva
Keyword(s):  
Water Stress ◽  
Plant Height ◽  
Sweet Sorghum ◽  
Dry Matter ◽  
Plant Density ◽  
Stem Diameter ◽  
Soluble Solids ◽  
Row Spacing ◽  
Main Crop ◽  
As Effects

ABSTRACT Along with sugarcane, which is the main crop used for ethanol production, the sweet sorghum is a promising agronomic and industrial alternative for cultivation in water-stress regions. This study aimed at assessing the row spacing (0.70 m, 0.80 m and 0.90 m) and plant density (80,000 plants ha-1; 100,000 plants ha-1; 120,000 plants ha-1; and 140,000 plants ha-1) for the BRS 511 sorghum cultivar, combined with sowing and harvest times. A split-plot experimental design, in complete randomized blocks, with four replications, was used. The analyzed variables were plant height, stem diameter, shoot fresh and dry matter, broth volume and total soluble solids (ºBrix). The results showed isolated effects of plant density on plant height and stem diameter, as well as effects of row spacing on total fresh mass and broth volume. The most efficient productive effect for the sweet sorghum was observed in populations lower than 120,000 plants ha-1 and row spacing inferior to 0.80 m, associated with harvest at 120 days after sowing.

EFFECT OF DATES AND RATES OF SOWING ON YIELD AND YIELD COMPONENTS OF NARBON VETCH UNDER SEMI-ARID CONDITIONS

2001 ◽  
Vol 49 (1) ◽  
pp. 103-105 ◽  
Author(s):  
A. M. Tawaha ◽  
M. A. Turk
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Field Experiments ◽  
Grain Weight ◽  
Arid Conditions ◽  
Yield And Yield Components ◽  
1000 Grain Weight ◽  
Semi Arid ◽  
Northern Jordan

Field experiments were conducted during the winter seasons of 1998–1999 and 1999–2000 at Houfa in northern Jordan, to study the effect of the date and rate of sowing on the yield and yield components of narbon vetch (Vicia narbonensis L.). Progressive delays in sowing beyond 1 st January led to yield reductions of 11.1 and 17.9 at successive 15-day intervals. Plant height, pods stem –1, stems m –2 and 1000-grain weight followed the same trend as the yield. Grain yield was not significantly affected by the sowing rate.

scholarly journals Zinc, a micronutrient and its effect to performance of BARI gom30

2020 ◽  
Vol 8 (2) ◽  
pp. 137
Author(s):  
Salamun Gismy ◽  
Md. Romij Uddin ◽  
Md. Sohanur Rahman ◽  
Fakhar Uddin Talukder ◽  
Md. Shafiul Islam Rion
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Maximum Yield ◽  
Grain Weight ◽  
Spike Length ◽  
Control Treatment ◽  
Straw Yield ◽  
Four Levels ◽  
1000 Grain Weight

To evaluate the effect of Zinc fertilizer on performance of wheat cv. BARI gom30, an experiment was carried out at Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, from November 2015 to March 2016. The experiment comprised four levels of Zinc (Zn) viz., 0, 1.5, 2 and 2.5 kg/ha. The experiment was laid out in a randomized complete block design with three replications. Application of Zinc (Zn) plant height, number of total tillers/plant, number of effective tillers/plant, spike length, number of fertile spikelets/spike numbers of sterile spikelets/spike number of grains/ spike, grain yield and straw yield were found significant. But there was no significant effect of the treatment on 1000-grain weight. The highest number of total tiller/plant (4.42), number of effective tillers/plant (3.92), number of grains/spike (47.70), 1000-grain weight (47.73 g), grain yield (5.06 t/ha), straw yield (6.21 t/ha) was obtained from 2 kg Zn/ha. The highest plant height (94.08 cm), spike length (9.92 cm), number of fertile spikelets/spike (19.59) and sterile spikelets/spike (3.22) and harvest index (46.16%) were recorded at 0 kg Zn/ha respectively. The control treatment indicated the lowest value for the yield attributing characters except the number of sterile spikelets/spike. Grain yield was found to be significantly and positively correlated with number of grains/spike and straw yield. It is recommended that application of 2 kg Zn/ha is the best for maximum yield of BARI gom30.   

scholarly journals THE INHERITANCE OF YIELD AND YIELD COMPONENTS OF FIVE WHEAT HYBRID POPULATIONS UNDER DROUGHT CONDITIONS

2016 ◽  
Vol 8 (2) ◽  
pp. 53 ◽  
Author(s):  
Nisar Ahmed ◽  
Muhammad Aslam Chowdhry ◽  
Ihsan Khaliq ◽  
Masahiko Maekawa
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Grain Weight ◽  
Spike Length ◽  
Genetic Advance ◽  
Wheat Varieties ◽  
Breeding Programs ◽  
Drought Conditions ◽  
1000 Grain Weight

The magnitude of genetic inheritance and expected genetic advance are important for the prediction of response to selection in diverse environments and provide the basis for planning and evaluating breeding programs. This work investigated the inheritance of traits related to drought in wheat under natural drought conditions. Cross combinations were made to produce F1 and F2 hybrid populations, which were evaluated in a randomized completed block design with three replications at University of Agriculture, Faisalabad, Pakistan. Six wheat varieties/lines and six derived F2 hybrids were studied to ascertain heritability and genetic advance for plant height, days taken to maturity, number of tillers per plant, spike length, number of grains per spike, 1000-grain weight, and grain yield per plant. Data were collected and subjected to statistical genetic analyses. Heritability estimates and expected genetic advance for plant height, days taken to maturity, number of tillers per plant, 1000-grain weight and grain yield per plant were high for the entire cross combinations while the estimates for spike length and number of grains per spike were relatively low. Our results suggest that improvement for these characters should be faster because of higher heritabilities and greater phenotypic variation. Prospects of genetic improvement for all the characters studied are evident. The most promising cross combinations were WL60 × LU26S and WL61 × LU26S. These traits, therefore, deserve better attention in future breeding programs for evolving better wheat for stress environments. <br /><br />

scholarly journals Evaluation of the Response of Sorghum to Tillage Systems and Nitrogen Fertilization

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Marwan Ramadhan ◽  
Sadiq Muhsin
Keyword(s):  
Grain Yield ◽  
Sorghum Bicolor ◽  
Leaf Area ◽  
Plant Height ◽  
Dry Matter ◽  
Biomass Yield ◽  
Grain Weight ◽  
Tillage System ◽  
Sorghum Bicolor L ◽  
1000 Grain Weight

In the subtropical semi-arid zones, sorghum Sorghum bicolor (L.) productivity is limited by numerous constraints. Relatively few studies have been conducted to measure the response of grain sorghum varieties to tillage and nitrogen. For sustainable crop production, selected tillage practice and fertilizer application are important. Field experiments were conducted at Al Qurna (QL), 74 km northwest Basrah province and Shatt al-Arab (SHL) and 17 km east Basrah province. A randomized complete block design, arranged in a split-split plot, was used with three replications. The tillage system was no tillage (NT), reduced tillage (RT), and conventional tillage (CT), while sorghum varieties were Inqadh, Rabih, and Cavire 2, and four levels of N fertilizer, viz., 0, 40, 80, and 120 kg ha−1. The objective of research was to evaluate two sorghum (Sorghum bicolor L.) varieties to tillage system and nitrogen (N) fertilizer. The application of tillage was shown to enhance the growth of sorghum as observed in the plant height, leaf area, number of grains panicle−1, 1000-grain weight, yield, biomass yield, and root dry matter. CT surpassed the other treatments for all studied traits. The highest value of plant height, number of grains panicle−1, grain yield, biomass yield, and root dry matter in the QL and SHL locations, respectively, were produced by Cavire 2. The plots fertilized with 120 kg N ha−1 maximize the values of plant height (132.33 cm in the SHL location), leaf area (3040.53 and 2751.47 cm2 in the QL and SHL location respectively), number of grains panicle−1 (1431.37 in the SHL location), 1000-grain weight (31.77 g in the QL location), biomass yield (15752.00 kg ha−1 in the SHL location), and root dry matter (22.42 and 20.75 g root cm−3 in the QL and SHL locations, respectively). Cavire 2 variety under CT with 80 kg N ha−1 in the QL location was the best (observed as the most promising) in terms of grain yield. Whereas Cavire 2 under CT showed best performance with 120 kg N ha−1 in the QL location in terms of biomass yield character.

Estimation of Genetic Variability, Correlation and Path analysis in short duration Rice Genotypes of Manipur

2017 ◽  
Vol 4 (2) ◽  
Author(s):  
SUDHIR KUMAR ◽  
S. BHUVANESWARI ◽  
E. LAMALAKSHMI DEVI ◽  
S. K. SHARMA ◽  
M. A. ANSARI ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Short Duration ◽  
Coefficient Of Variation ◽  
Positive Association ◽  
Grain Weight ◽  
Days To Maturity ◽  
Spikelets Per Panicle ◽  
Correlation And Path Analysis ◽  
1000 Grain Weight

High significant variations were observed for all the traits studied under present investigation. Considering parameters, high phenotypic coefficient of variation (PCV) and genotypic coefficient of variation (GCV) were observed for the number of effective tillers per plant, grain yield per plant, plant height followed by days to 50% flowering. Heritability in broad sense was higher in all of the characters studied under present investigation. High heritability coupled with high genetic advance as percent of mean was observed in plant height, days to 50% flowering, days to maturity, number of spikelets per panicle and number of grains per panicle, indicated that these characters under additive gene control and selection for improvement might be effective. Both at the phenotypic and genotypic level, grain yield per plant had significant and positive association with plant height, panicle length,number of filled grains per panicle and number of spikelets per panicle but had significant negative association with number of effective tillers per plant and 1000- grain weight. Number of spikelets per panicle had the maximum positive and direct effect followed by days to maturity, plant height, spikelet fertility and 1000- grain weight. Based on mean performance and various genetic parameters attributes, advance line namely, MC-34-1-10-6-1-26 was observed to be promising because it is of short duration, and yielded significantly higher than the short duration check RCM-8. Promising culture would be recommended for double cropping in the valley region of the state.

Sign in / Sign up

Export Citation Format

Share Document