scholarly journals Effect of Phosphorus Application Methods on Growth and Yield of Maize under Water Deficit Conditions

2021 ◽  
Vol 3 (1) ◽  
pp. 17-29
Author(s):  
Hakoomat Ali
Keyword(s):  
Grain Yield ◽  
Growth Parameters ◽  
Block Design ◽  
Grain Weight ◽  
Growth And Yield ◽  
Full Irrigation ◽  
Maize Crop ◽  
Irrigation Level ◽  
Phosphorus Application ◽  
Irrigation Levels

A field study was conducted to investigate effect of phosphorus and different levels of irrigation on growth and yield of maize at the Agronomic Research Area, Faculty of Agricultural sciences and Technology, Bahauddin Zakariya University, Multan, during autumn 2016.The Experiment was laid out in randomized complete block design (RCBD) with split plot courses of action having three replications with net plot size of 4m x 3m. The crop was sown in 75 cm spaced rows, while plant to plant distance was maintained at 30 cm with the help of dibbler. Experimental treatments comprised of two irrigation level sand four phosphorus levels. The crop was harvested at maturity and the data were recorded by using the standard procedures. Maximum grain yield was obtained at full irrigation levels where phosphorus was applied @ 100 kg ha-1. All the growth and yield parameter increased with full irrigation levels with application of Phosphorus at the rate of 100 kg ha-1 while it was decreased where half irrigation was applied. Increase in P2O5 rates upto100 kg ha-1 enhanced the plant height, cob length, cob weight, thousands grain weight, Beyond application of 100 kg P2O5 ha-1 there was no significant increase in number of grains cob-1, thousand grain weight and other growth parameters. It is recommended that maize crop should preferably be fertilized @ 100 kg Phosphorus per hectare to get maximum grain yield under the ecological conditions of Multan.

scholarly journals Peanut yield under irrigation levels in off-season cultivation

2021 ◽  
Vol 53 (1) ◽  
pp. 55-67
Author(s):  
Pablo Nascimento de Oliveira França ◽  
Rogério Teixeira de Faria ◽  
Willians César Carrega ◽  
Anderson Prates Coelho ◽  
Ignácio José Godoy ◽  
...  
Keyword(s):  
Deficit Irrigation ◽  
Block Design ◽  
Seed Mass ◽  
Sprinkler System ◽  
Growth And Yield ◽  
Full Irrigation ◽  
Irrigation Level ◽  
Yield Increase ◽  
Peanut Crop ◽  
Irrigation Levels

Water deficit is considered the most critical environmental factor for peanut production in Brazil, as it constitutes one of the major constraints to the expansion of its cultivation in the suitable crop zones of the country. Determining crop water demand is fundamental to increasing yield with lower water consumption. The present study aimed to evaluate the effects of full and deficit irrigation levels (L1 = 8%, L2 = 27%, L3 = 63%, L4 = 94% and L5 = 100% replenishment of crop evapotranspiration) on the development, growth and yield of peanut crop sown in two times, February and March. Treatments were distributed in a split-plot randomized complete block design, with four replicates, using a line-source sprinkler system. Irrigation depths from 65 to 314 mm were applied with the levels L1 to L5 during the first and second cropping cycles. Full irrigation with sowing in March was more advantageous due to yield increase of up to 30% compared to sowing in February, but crop cycle was 25 days longer. Water stress caused by deficit irrigation reduced plant height, seed mass and pod yield, while full irrigation (L5) led to yields from 4,141 to 5,102 kg ha-1 for February and March, approximately three times higher than those obtained with the lowest irrigation level (L1). Highlights Peanut has great importance in the food and industry of several countries. The results of this research apply to regions that require irrigation, which is of about 70% of the areas of the globe with this legume. This paper contributes with information that emphasizes the possibility of cultivation in the drought season, aiming at the expansion of the crop and the production of quality seeds using irrigation.

scholarly journals Influence of date of transplanting on the growth and yield performance of high yielding varieties of Boro rice

2019 ◽  
Vol 17 (3) ◽  
pp. 301-308
Author(s):  
Tapas Kumar Roy ◽  
Swapan Kumar Paul ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Grain Yield ◽  
Growth Parameters ◽  
Block Design ◽  
Grain Weight ◽  
Growth And Yield ◽  
Yield Performance ◽  
Area Index ◽  
Straw Yield ◽  
1000 Grain Weight ◽  
Boro Rice

An experiment was conducted to find out the effect of variety, date of transplanting and its interaction on the growth and yield performance of high yielding Boro rice. The experiment comprised five varieties viz., BRRI dhan28, BRRI dhan58, BRRI dhan67, BRRI dhan69, BRRI dhan74 and five dates of transplanting viz., 15 December, 30 December, 15 January, 30 January and 15 February. The experiment was laid out in a randomized complete block design with three replications. Results revealed that growth parameters, crop characters, yield components and yield were significantly influenced by variety, date of transplanting and their interactions. The leaf area index (LAI) and dry matter production hill-1 were highest in BRRI dhan69 when transplanted on 15 January whereas the lowest value was found in BRRI dhan28 when transplanted on 15 February. The number of effective tillers hill-1 (11.80), number of grains panicle-1 (130.90), 1000-grain weight (22.07 g), grain yield (4.96 t ha-1) and straw yield (6.64 t ha-1) were highest in BRRI dhan69 whereas corresponding lowest values were recorded in BRRI dhan28. The crop transplanted on 15 January produced the highest number of effective tillers hill-1 (12.81), highest number of grains panicle-1 (131.20), heaviest 1000-grain weight (21.93 g), highest grain yield (5.36 t ha-1) and highest straw yield (7.71 t ha-1). In case of interaction, the highest grain (5.90 t ha-1) and straw yields (7.87 t ha-1) were recorded in BRRI dhan69 transplanted on 15 January whereas the lowest grain and straw yields were recorded in BRRI dhan28 transplanted on 15 February. Therefore, it can be concluded that BRRI dhan69 along with 15 January transplanting appears as the promising combination in terms of grain and straw yields. J Bangladesh Agril Univ 17(3): 301–308, 2019

scholarly journals Effect of different irrigation levels on the performance of wheat

2018 ◽  
Vol 29 (2) ◽  
pp. 99-106 ◽  
Author(s):  
ST Islam ◽  
MZ Haque ◽  
MM Hasan ◽  
ABMMM Khan ◽  
UK Shanta
Keyword(s):  
Block Design ◽  
Coastal Region ◽  
Growth Yield ◽  
Research Field ◽  
Growth And Yield ◽  
Irrigation Level ◽  
Randomized Block Design ◽  
Package Program ◽  
Biological Yield ◽  
Irrigation Levels

An experiment was conducted at the research field of the Department of Agricultural Botany, Patuakhali Science and Technology University, Patuakhali under the Agro-ecological zone-13 (AEZ-13) during the period from November 2012 to February 2013. The aim of the study was to identify the most effective irrigation level for obtaining the better growth and higher yield performance of BARI Gom-25 that are suitable to cultivate under  coastal region of Patuakhali, Bangladesh. So, the present study was consists of five irrigations levels including control viz. control or no irrigation (T0), one irrigation at 25 DAS (T1), two irrigations at 25 and 40 DAS (T2), three irrigations at 25, 40 and 55 DAS (T3)  and four irrigations at 25, 40, 55 and 70 DAS (T4). The seeds of BARI Gom-25 were collected from the BARI, Joydebpur, Gazipur on 22 November, 2012. The experiment was laid out in completely randomized block design (RCBD) with four replications and analysis was done by the MSTAT-C package program where means were separated by DMRT at 5% level of probability. Data were recorded on various growth and yield attributing traits. The plot size was 5 m2 (2.5 × 2.0 m) where row to row and seed to seed distances were 20 and 10 cm respectively. Data were collected on various morpho-physiological growth, yield and yield attributing traits. Results obtained from the present study, whole characters of the study were significant at 5% by the moisture (irrigation) levels where three irrigations given at 25, 40 and 55 DAS had most effective than that of other moisture levels and no irrigation. From the results investigation, it was found that the tallest plant (76.86 cm), maximum requiring days to anthesis (61.00 days), maturity (109.0 days) and maximum number of effective tillers (5.00 hill-1),the highest grain growth (3.11g at 36 DAA) and grains (44.00 spike-1) were obtained with three irrigation (T3) levels. Similarly, T3 further showed the greater performance on spike length (17.28 cm), 1000-seed weight (50.16 g), grain (4.16 t ha-1), straw (5.89 t ha-1) and biological yield (10.05 t ha-1) as well as the higher harvest index (41.39%). Investigated above whole characters were produced lower performances under no moisture (irrigation) treatments. These results indicated that irrigation at three times (T3) would be most advantageous irrigation levels for wheat production under the studied non saline ecosystem of coastal region.Progressive Agriculture 29 (2): 99-106, 2018

Effect of phosphorus and zinc nutrition on growth and yield of fodder cowpea

2016 ◽  
Author(s):  
Rakesh Kumar ◽  
Deepak Kumar Rathore ◽  
Magan Singh ◽  
Parveen Kumar ◽  
Anil Khippal
Keyword(s):  
Growth Parameters ◽  
Block Design ◽  
Application Rate ◽  
Leaf Length ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Green Fodder ◽  
Fodder Yield ◽  
Zinc Levels ◽  
Phosphorus Application

An experiment consisting of four phosphorus levels (0, 40, 60 and 80 kg/ha P2O5) and five zinc levels (0, 10, 20, 30 and 40 kg/ha ZnSO4) was laid out in randomized block design in factorial mode to find out the effect on yield and quality of fodder cowpea [Vigna Unguiculata (L.)Walp.]. Growth parameters viz. plant height, number of leaves, number of branches, leaf length, leaf width and leaf stem ratio were improved with the application of 60 kg/ha P2O5 and 20 kg/ha ZnSO4. Application of 60 kg/ha phosphorus recorded 27.64 t/ha yield, which was 7.50 and 55.6 % higher than 40 kg/ha and no phosphorus application, respectively. Application of zinc in the form of ZnSO4 @ 20 kg/ha increased significantly the green fodder yield (25.89 t/ha). Interaction effect of phosphorus and zinc application was found significant with respect to green fodder, dry matter yield and nutrient uptake. Yield, phosphorus and zinc uptake in cowpea fodder were showing declining trend at combination of application rate more than 60 kg/ha P2O5 and 20 kg/ha ZnSO4.

scholarly journals Effect of different rates of sawdust - piggery compost on soil properties and yield of maize in nutrient depleted soil

2021 ◽  
Vol 3 (1) ◽  
pp. 016-022
Author(s):  
Stephen Okhumata Dania ◽  
Adebimpe Omowumi Ayegbe ◽  
Bright Ehijiele Amenkhienan
Keyword(s):  
Grain Yield ◽  
Soil Properties ◽  
Dry Matter ◽  
Growth Parameters ◽  
Block Design ◽  
Organic Fertilizer ◽  
Soil Nutrient ◽  
University Teaching ◽  
Growth And Yield ◽  
Dry Matter Yield

Compost is an important source of organic fertilizer that can be used to amend degraded soil to improve soil nutrient and crops yield. This experiment was to evaluate the effect of sawdust – piggery compost on soil properties, growth and yield of maize and it was carried out at the Ambrose Alli University Teaching and Research Farm, Emaudo, Ekpoma, Edo State. The experiment was fitted in a Randomized Complete Block Design (RCBD) with seven treatments and three replicates. The treatments were; control (0), 2, 4, 6, 8, 10 and 12 tonnes of sawdust – piggery compost per hectares (ha-1). Data collected were analysed using ANOVA and LSD was used to separate means. Soil nutrients were below critical levels and the application of compost improved fertility status of the soil. Growth parameters, dry matter yield, cob weight, grain yield and nutrient uptake were determined. It was observed that application of Sawdust – piggery compost significantly (p 0.05) increased the growth of maize compared to control. The application of 8 to 12 tonnes of sawdust – piggery compost significantly (p 0.05) increased the plant height, leaf area and stem girth of maize compared to other treatments. The application of 8 to 12 tonnes per hectares (ha-1) of sawdust – piggery compost significantly (p 0.05) increased the cob weight, grain and dry matter yield of maize compared to other treatments, however, the application of 10 t ha-1 of compost to maize increased grain yield of maize than others rate of applications with the yield value of 4.60 t ha-1. The uptake of nitrogen, phosphorus and potassium were higher with application of 12 tonnes of compost. In conclusion, the application rates of 10 t ha-1 of sawdust – piggery compost per hectare on nutrient depleted soils will improve the growth and yield of maize.

scholarly journals Growth and Yield of Hybrid Maize as Influenced by Fertilizer Management

2018 ◽  
Vol 6 (12) ◽  
pp. 1727
Author(s):  
Md. Maidul Hasan ◽  
Tushar Kanti Ray ◽  
K. M. Manirul Islam ◽  
S.M. Younus Ali ◽  
Noor Muhammad ◽  
...  
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Poultry Manure ◽  
Grain Weight ◽  
Growth And Yield ◽  
Cow Dung ◽  
Plant Weight ◽  
Yield Attributes ◽  
Weight Yield ◽  
Hybrid Maize

An experiment was carried out at the Agronomy Field Laboratory, Department of Agronomy, Hajee Mohammad Danesh Science and Technology University, Bangladesh during the rabi season (December to May), 2012-13 to study the effect of different organic and inorganic fertilizers on growth and development of hybrid maize (Denali). The experiment was laid out in Randomized Complete block Design with three replications with 30 plots. Ten fertilizer treatments (T1= Compost, T2= Cow dung, T3= Poultry manure, T4= Recommended fertilizer dose, T5= Compost + Half recommended fertilizer dose, T6= Compost + Full recommended fertilizer dose, T7= Cow dung + Half recommended fertilizer dose, T8= Cow dung + Full recommended fertilizer dose, T9= Poultry manure + Half recommended fertilizer dose, T10= Poultry manure + Full recommended fertilizer dose. The recommended fertilizer dose was 500 Kg ha-1 urea + 250 Kg ha-1 TSP + 200 Kg ha-1 MP + 15 Kg ha-1 ZnSO4 + 6 Kg ha-1 Boric Acid. And the rate of Compost, Cow dung and Poultry manure was 10t/ha. The effect of different manure and fertilizer doses on the yield and yield attributes were significant. The plant height, number of leaves per plant, weight of stem per plant, weight of leaves per plant, length of cob, grain weight per cob, diameter of cob, no. of grains per row, no. of total grains per cob, 1000-grain weight, yield plant-1, yield ha-1 were significantly affected by different manures and fertilizer uses with different doses. The treatments T1, T2, T3, T4, T5, T6, T7, T8, T9 and T10 gave grain yield 10.16, 9.09, 8.49, 14.34, 13.35, 18.12, 11.99, 17.09, 11.40 and 15.98 t ha-1, respectively. The T6 Treatment gave higher grain yield (18.12) t ha-1 and the T3 treatment performed lowest grain yield (8.49 t ha-1). The application of compost and full dose fertilizer is higher yielding. Balance nutrition with enough organic matter enrichment of the soil is the cause of this result.

scholarly journals Effect of Nitrogen Fertilizer Applications on Nitrogen Remobilization and Grain Yield in Soybean (Glycine max [L] Merril) in the Savelugu-Nanton Municipality in Northern Region of Ghana

2021 ◽  
Vol 9 (8) ◽  
pp. 1514-1523
Author(s):  
John Bokaligidi Lambon ◽  
Joseph Sarkodie- Addo ◽  
James Mantent Kombiok
Keyword(s):  
Glycine Max ◽  
Grain Yield ◽  
Growth Parameters ◽  
Block Design ◽  
Dry Weight ◽  
Northern Region ◽  
Growth And Yield ◽  
Nitrogen Remobilization ◽  
Glycine Max L ◽  
N Remobilization

Two experiments were conducted in the Savelugu-Nanton Municipality of the Northern Region of Ghana in 2012 and 2013 to assess the effect of N fertilizer on growth, N remobilization and grain yield of three local varieties of soybean (Glycine max [L] Merill). The experiments were a 3 x 4 factorial laid in Randomized Complete Block Design (RCBD) with four replications. Factor A was soybean varieties (Jenguma, Quarshie, Ahotor); Factor B was 0, 15, 30 and 45 kg N ha-1. The experimental fields were planted manually on the flat by drilling and later thinned to 2 plants hill-1 at 0.50 m × 0.10 m with a population of about 400 000 plants ha-1. Growth and yield parameters measured were plant height, nodule number plant-1, nodule dry weight plant-1, percent nodule effectiveness, number of pods plant-1, number of seeds pod-1, 100 seed weight, harvest index and grain yield. The results showed that the control recorded lower figures in all growth parameters. Nitrogen remobilization was also observed in all plots, which indicate that soybean needs greater levels of N during grain filling. Again, N remobilization and soybean yield were highest in the 45 kg N ha-1 treatment compared to the other treatments. However, considering the overall yields, farmers in the study area should be advised to adopt starter N fertilization of soybean for higher yields as the soils are highly degraded in soil fertility.

scholarly journals Enhancing rice yield in acidic soil through liming and fertilizer management

2018 ◽  
Vol 16 (3) ◽  
pp. 357-365
Author(s):  
Syeda Ariana Ferdous ◽  
Mohammad Noor Hossain Miah ◽  
Mozammel Hoque ◽  
Sazzad Hossain ◽  
Ahmed Khairul Hasan
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Growth Parameters ◽  
Block Design ◽  
Fertilizer Application ◽  
Chemical Fertilizer ◽  
Acidic Soil ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Four Levels

The effect of lime and fertilizer application, as the management of soil acidity, on the growth and yield of rice cv. BRRI dhan50 was investigated during Aman rice season at the Agronomy Field Laboratory of Sylhet Agricultural University, Bangladesh. The experiment was consisted of two factors namely lime and fertilizer. There were four levels of lime (0, 0.50, 1.00, and 1.50 t ha–1 of CaCO3.MgCO3) and three levels of fertilizers (control, FYM @ 10 t ha–1, and chemical fertilizer @ 100-30-42-4-3-0.4 kg ha–1 of N-P-K-Ca-S-Zn). The experiment was laid out in a randomized complete block design with three replications where the unit plot size was 4.0 m x 2.5 m. Growth parameters, yield components and yield of BRRIdhan 50 rice increased with increasing lime rate in association of fertilizer in acidic soil. The highest grain yield (2.90 t ha–1) was recorded from the application of 1.50 t ha–1 lime and the lowest (2.06 t ha–1) was from control (0t ha–1), irrespective of fertilizer. On the other hand, the best effect of fertilizers on grain yield (3.08 t ha–1) was found with the application of FYM @ 10 t ha–1 and the lowest yield (1.59 t ha–1) was in control. The treatment combination of lime 1.50 t ha–1 and FYM (@ 10 t ha–1 produced the highest grain yield (3.60 t ha–1), which was followed by treatment combination of lime 1.50 t ha–1 and chemical fertilizer @ 100-30-42-4-3-0.4 kg ha–1 of N-P-K-Ca-S-Zn (3.28 t ha–1). Additionally, application of lime and FYM improved the soil fertility and properties of acidic soil for crop production by increasing the pH, organic matter and availability of some essential nutrients. From the study, it was indicated that both FYM and lime could affect to enhance the grain yield of rice in acidic soil. J. Bangladesh Agril. Univ. 16(3): 357–365, December 2018

scholarly journals Effect of irrigation levels and foliar application of fertilizers on some agronomic and oil characteristics of castor bean (Ricinus communis L.)

2022 ◽  
Vol 9 (1) ◽  
pp. 1-8
Author(s):  
Fardaneh Osati ◽  
Touraj Mir Mahmoudi ◽  
Bahman Paseban Eslam ◽  
Saman Yazdan Seta ◽  
Hassan Monirifar
Keyword(s):  
Grain Yield ◽  
Castor Bean ◽  
Agricultural Research ◽  
Foliar Application ◽  
Ricinus Communis ◽  
Block Design ◽  
Grain Weight ◽  
Control Input ◽  
Oil Characteristics ◽  
Irrigation Levels

To study the effect of irrigation levels and foliar application of fertilizers on some agronomic and oil characteristics of castor bean, an experiment was conducted at the East Azarbaijan Agricultural Research and Education Center, Tabriz, Iran in 2017-2019 cropping seasons. The experiment was laid out as a split-plot design based on a completely randomized block design with three replications. In the present study, main cluster length, number of branches, number of capsules per plant, number of seeds per capsule, 100-grain weight biological yield, grain yield, oil percent and oil yield were measured. Irrigation intervals (normal irrigation (irrigation after 60 mm), irrigation after 80 mm and 140 mm of evaporation) was established as main plots and the foliar applications of fertilizers (N, K, S, N + K, and N + S, K + S, N + K + S and control) input as sub-plots. The results showed that, except for the oil percentage, all the examined traits were decreased by water limitation. The highest values of the traits, other than the 100-grain weight, were obtained for foliar application of N + K + S. This treatment improved the grain yield per unit area under normal irrigation and moderate irrigation and severe stresses by 62.76%, 41.46% and 28.98% respectively. Thus, the foliar application of S (2000 ppm) + N (3000 ppm) + K (3000 ppm) fertilizer is the best treatment for mitigating some harmful effects of water deficit on castor bean.

scholarly journals Influence of plant densities and fertility levels on growth and yield of chickpea (CicerarietinumL.) genotypes

2021 ◽  
pp. 112-115
Author(s):  
GURINDER SINGH
Keyword(s):  
Grain Yield ◽  
Growth Parameters ◽  
Block Design ◽  
Low Fertility ◽  
Growth And Yield ◽  
Planting Density ◽  
Fertility Level ◽  
Yield Attributes ◽  
Randomized Block Design ◽  
Plant Densities

A field experiment was conducted at Research and Advanced Studies, Dhablan, Department of Agriculture, Khalsa College, Patiala during rabiseason 2019-20 to find out the influence of plant densities and fertility levels on growth and yield of chickpea (Cicer arietinum L.) genotypes. The experiment was conducted in factorial randomized block design and replicated thrice. The experiment consisted of two genotypes (PBG 7 and GPF 2), two planting densities and two fertility levels. The results revealed that the genotype PBG 7 recorded significantly highestgrain yield (18.01 q ha-1) as compared to genotype GPF2 (16.62 q ha-1). The growth parameters were also higher with genotype PBG 7 followed by GPF 2. The density of 30 × 10 cm recorded. The highest grain and straw yield (17.47 and 22.51 q ha-1)as compared to 45× 10 cm spacing (16.74 and 18.53 q ha-1). However, yield attributes like pods plant-1,grain yield plant-1 and harvest index were higher with wider planting density (45 × 10 cm). Higher fertility level (N30P60K30S20 kg ha-1) produced highest grain yield (17.88 q ha-1) as compared to low fertility levels(16.75 q ha-1). The growth and yield parameters followed the similar trend. The chickpea genotype PBG 7 showed better response to closer planting density and higher fertility level.

Sign in / Sign up

Export Citation Format

Share Document