scholarly journals Role of Terminal Groups in Aromatic Molecules on the Growth of Al2O3-Based Hybrid Materials

Author(s):  
Arbresha Muriqi ◽  
Maarit Karppinen ◽  
Michael Nolan

Hybrid materials composed of organic and inorganic components offer the opportunity to develop interesting materials with well-controlled properties. Molecular Layer Deposition (MLD) is a suitable thin film deposition technique for the controlled growth of thin, conformal hybrid films. Despite the great interest in these materials, a detailed understanding of the atomistic mechanism of MLD film growth is still lacking. This paper presents a first principles investigation of the detailed mechanism of the growth of hybrid organic-inorganic thin films of aluminium oxide and aromatic molecules with different terminal groups deposited by MLD. We investigate the chemistry of the MLD process between the post-TMA pulse methyl-terminated Al2O3 surface and the homo- or hetero- bifunctional aromatic compounds with hydroxy (OH) and/or amino (NH2) terminal groups: hydroquinone (HQ), p-phenylenediamine (PD) and 4-aminophenol (AP). Double reactions of aromatic molecules with the alumina surface are also explored. We show that all aromatic precursor molecules bind favourably to the methyl terminated Al2O3, via formation of Al-O and Al-N bonds and CH4 elimination. While reaction energetics suggest a higher reactivity of the OH group with TMA in comparison to the NH2 group, which could enable the double reaction phenomenon for HQ we propose that the upright configuration will be present so that the organic molecules are self-assembled in an upright configuration, which leads to thicker hybrid films. Interactions between the methyl-terminated Al2O3 with substituted phenyls are investigated to examine the influence of phenyl functionalisation on the chemistry of the terminal groups. Reaction energetics show that phenyl functionalization actually promotes an upright configuration of the molecule, which leads to thicker and more flexible films, as well as tuning the properties of the aromatic components of the hybrid films. We also investigate the interactions between methyl-terminated Al2O3 with new possible MLD organic precursors, hydroquinone bis(2-hydroxyethyl)ether and 1,1'-biphenyl-4,4'-diamine. DFT shows that both aromatic molecules react favourably with TMA and are worthy of further experimental investigation.

2021 ◽  
Author(s):  
Kristina Ashurbekova ◽  
Karina Ashurbekova ◽  
Iva Saric ◽  
Evgeny Modin ◽  
Mladen Petravic ◽  
...  

We developed a thin film growth with a radical-initiated cross-linking of vinyl groups in a layer-by-layer manner via molecular layer deposition (MLD). The cross-linked film exhibited improved properties like 12% higher density and enhanced stability compared to the non-cross-linked film.


Fractals ◽  
1996 ◽  
Vol 04 (03) ◽  
pp. 321-329 ◽  
Author(s):  
PABLO JENSEN ◽  
ALBERT-LÁSZLÓ BARABÁSI ◽  
HERNÁN LARRALDE ◽  
SHLOMO HAVLIN ◽  
H. EUGENE STANLEY

In this paper, we briefly review a model that describes the diffusion-controlled aggregation exhibited by particles as they are deposited on a surface. This model allows us to understand many experiments of thin film deposition. In the Sec. 1, we describe the model, which incorporates deposition, particle and cluster diffusion, and aggregation. In Sec. 2, we study the dynamical evolution of the model. Finally, we analyze the effects of small cluster mobility and show that the introduction of cluster diffusion dramatically affects the dynamics of film growth. Some of these effects can be tested experimentally.


Author(s):  
Seung-Hwan Lee ◽  
Hyun-Jun Jeong ◽  
Ki-Lim Han ◽  
GeonHo Beak ◽  
Jin-Seong Park

Indium oxide and indicone hybrid films consisting of indium oxide and organic aromatic linker are grown by molecular layer deposition (MLD) using bis(trimethylsilyl)amido-diethyl Indium (INCA-1) as the indium precursor, hydrogen...


2021 ◽  
pp. 2150081
Author(s):  
ERMAN ERDOGAN

In this study, spin coating, which is a chemical film layer thin film deposition method, was used for coronene films that were grown on Si substrates annealed at 325, 350 and 375[Formula: see text]K to examine the impacts on the optical properties of films. This method allows for easy control of the deposition parameters such as concentration, temperature and time as well as enables the film growth at low cost. Optical (UV–Vis) spectral measurements in the wavelength range from 200[Formula: see text]nm to 800[Formula: see text]nm were used to extract the bandgap information and to calculate various optical parameters of the spin-coated coronene films. The electronic transitions on the absorption of photons of suitable energy are of indirect allowed type. The corresponding optical bandgap ([Formula: see text]) was determined. Complex dielectric constants, dissipation factor, optical and electrical conductances and refractive index of coronene films were analyzed as a function of temperature. As the film annealing temperature was increased, the dielectric constants and the refractive index values increased, whereas the optical bandgap and electrical and optical conductivity values decreased.


1990 ◽  
Vol 206 ◽  
Author(s):  
I. Yamada ◽  
G.H. Takaoka ◽  
H. Usui ◽  
S.K. Koh

ABSTRACTAtomic scale imaging by STM and TEM of the initial stages of film growth of Ag and Au on graphite substrates indicate that the film nucleation processes are markedly different for ionized cluster beam (ICB) and molecular beam (MBE) deposition. Recent results on measurements of cluster size and formation of epitaxial metal-semiconductor layers by ICB are also discussed.


2021 ◽  
Vol 9 ◽  
Author(s):  
Jian Liu ◽  
Jiajun Wang

The design of multifunctional thin films holds the key to manipulate the surface and interface structure of the electrode and electrolyte in rechargeable batteries and achieve desirable performance for various applications. Molecular layer deposition (MLD) is an emerging thin-film technique with exclusive advantages of depositing hybrid organic-inorganic materials at a nanoscale level and with well tunable and unique properties that conventional thin films might not have. Herein, we provide a timely mini-review on the most recent progress in the surface chemistry and MLD process of novel hybrid organic-inorganic thin films and their applications as the anode, cathode, and solid electrolytes in lithium-ion batteries. Perspectives for future research in designing new MLD process and precursors, enriching MLD material library, and expanding their potential applications in other energy storage systems, are discussed at the end.


Sign in / Sign up

Export Citation Format

Share Document