scholarly journals Variation of Near Fault Ground Motion Intensity Measures Due to Filtering

2020 ◽  
Vol 3 (2) ◽  
pp. 841-849
Author(s):  
Esengul Cavdar ◽  
Gokhan Ozdemir ◽  
Ozkan Kale
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Low Frequency ◽  
Frequency Noise ◽  
Intensity Measures ◽  
Near Fault ◽  
Cutting Frequency ◽  
Ground Motion Records ◽  
Near Fault Ground Motion ◽  
High Pass

Ground motions recorded at near fault zones ensures rich low frequency contents, and high velocity pulse signals which may result in large shear force and displacement demands in structural elements. During the recording of these seismic events by accelerometers, low-frequency noise may sometimes accompany the signal. Thus, extracting this noise from recorded acceleration data is a crucial step of post-processing performed prior to use of acceleration time series in structural analyses for both design or assessment purpose. The objective of this study is to assess the effect of high-pass filtering on the intensity measures of ground motions. A set of near fault ground motions that comprises both pulse-like and non-pulse like characteristics were selected and they were subjected to filtering for various cutting frequency contents. As a function of filtering, variation in several intensity measures of filtered ground motions namely, PGD, PGV, PGA, PGV/PGA and significant duration were analyzed. It is revealed that changing the cutting frequency of high pass filtering considerably changes the intensity measures of ground motion records.

scholarly journals Evolution law of overall damage of concrete gravity dam under near-fault ground motion

2021 ◽  
Author(s):  
Yafei Zhai ◽  
Liaojun Zhang ◽  
Hanyun Zhang ◽  
Tianxiao Ma ◽  
Binghui Cui
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Gravity Dam ◽  
Gravity Dams ◽  
Near Fault ◽  
Concrete Gravity Dams ◽  
Fling Step ◽  
Ground Motion Records ◽  
Near Fault Ground Motion ◽  
Dynamic Damage

Abstract Strong earthquake cases of concrete gravity dams show that the foundation damage has an important influence on the seismic response and damage characteristics of the dam body. Compared with non-pulse ground motions, pulse-like near-fault ground motions have a wider response spectrum sensitive zone, which will cause more modes of the structure to respond, resulting in more serious damage to the structure. In order to study the real dynamic damage characteristics of concrete gravity dams under the action of near-fault ground motions, this paper takes Koyna gravity dam as the object and establishes a multi-coupling simulation model that can reasonably reflect the dynamic damage evolution process of dam concrete and foundation rock mass. A total of 12 near-fault ground motion records with three types of rupture directivity pulse, fling-step pulse and non-pulse are selected, deep research on the overall damage evolution law of concrete gravity dams. Considering the additional influence of different earthquake mechanisms, different site types and other factors on the study, the selected ground motion records are from the same seismic events (Chi-Chi), the same direction but different stations. The results show that the foundation of the concretes gravity dam often get damaged before the dam body under the action of strong earthquakes. Compared with the near-fault non-pulse ground motion, the structural damage of the gravity dam under the action of the near-fault directivity pulse ground motion is significantly increased, and causes greater damage and displacement response to the dam body. The near-fault fling-step pulse ground motion has the least impact on the dynamic response of the gravity dam structure.

Simulation and analysis of a vertically irregular building subjected to near-fault ground motions

2020 ◽  
Vol 36 (3) ◽  
pp. 1485-1516
Author(s):  
Jui-Liang Lin ◽  
Wen-Hui Chen ◽  
Fu-Pei Hsiao ◽  
Yuan-Tao Weng ◽  
Wen-Cheng Shen ◽  
...  
Keyword(s):  
Numerical Model ◽  
Seismic Response ◽  
Ground Motion ◽  
Ground Motions ◽  
Far Field ◽  
Near Fault ◽  
Study Results ◽  
Rc Building ◽  
Near Fault Ground Motion ◽  
Story Building

A shaking table test of a three-story reinforced concrete (RC) building was conducted. The tested building is vertically irregular because of the first story’s elevated height and the third story’s added RC walls. In addition to far-field ground motions, near-fault ground motions were exerted on this building. A numerical model of the three-story building was constructed. Comparing with the test results indicates that the numerical model is satisfactory for simulating the seismic response of the three-story building. This validated numerical model was then further applied to look into two issues: the effective section rigidities of RC members and the effects of near-fault ground motions. The study results show the magnitude of the possible discrepancy between the actual seismic response and the estimated seismic response, when the effective section rigidities of the RC members are treated as in common practice. An incremental dynamic analysis of the three-story RC building subjected to one far-field and one near-fault ground motion, denoted as CHY047 and TCU052, respectively, was conducted. In comparison with the far-field ground motion, the near-fault ground motion is more destructive to this building. In addition, the effect of the selected near-fault ground motion (i.e. TCU052) on the building’s collapse is clearly identified.

A spectral-acceleration-based combination-type earthquake intensity measure for high-rise stack-like structures

2019 ◽  
Vol 23 (7) ◽  
pp. 1350-1366 ◽  
Author(s):  
Yikun Qiu ◽  
Changdong Zhou ◽  
Siha A ◽  
Guangwei Zhang
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Spectral Acceleration ◽  
Intensity Measure ◽  
Earthquake Intensity ◽  
Intensity Measures ◽  
Higher Modes ◽  
High Rise ◽  
Near Fault ◽  
Period Elongation

Ground motion intensity measures are of great importance for the seismic design of structures. A well-chosen intensity measure will reduce the detailed ground motion record selection effort for the nonlinear dynamic structural analyses. In this article, a spectral-acceleration-based combination-type earthquake intensity measure is presented. This intensity measure considers the higher modes effect and period elongation effect due to nonlinear deformation at the same time. The modal mass participation factors are determined to take weighting coefficients and the product of elastic first-mode period T1 and a constant C is expressed to represent the elongated period. Therefore, the proposed intensity measure is a combination of earthquake ground motion characteristics, elastic structural responses, higher modes participation, and the period elongation effect due to inelastic structural behaviors. Four three-dimensional models of reinforced concrete stack-like structures including a 240 m-high chimney, a 180 m-high chimney, a 120 m-high chimney, and a 42.3 m-high water tower are established and analyzed in ABAQUS to investigate the correlation between the intensity measure and the maximum curvatures under 44 far-field ground motions and 28 near-fault ground motions with a pulse-like effect. With the optimal vibration modes and the proper period elongation coefficient, the efficiency of the introduced intensity measure is compared with the other 15 intensity measures. The results indicate that the proposed intensity measure is believed to be a good choice for high-rise stack-like structures, especially under the near-fault ground motions with pulse-like effect.

scholarly journals Seismic Response of a Base Isolated Cable-Stayed Bridge Under Near-Fault Ground Motion Excitations

2018 ◽  
Vol 15 (1) ◽  
pp. 1-14
Author(s):  
Ahad Javanmardi ◽  
Zainab Ibrahim ◽  
Khaled Gheadi ◽  
Mohammed Jameel ◽  
Usman Hanif ◽  
...  
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Nonlinear Dynamic Analysis ◽  
Dynamic Responses ◽  
Base Shear ◽  
Seismic Behaviour ◽  
Isolation System ◽  
Near Fault ◽  
Cable Stayed Bridge ◽  
Near Fault Ground Motion

Nowadays, development of cable-stayed bridges is increasing around the world. The mitigation of seismic forces to these bridges are obligatory to prevent damages or failure of its structural members. Herein, this paper aimed to determine the near-fault ground motion effect on an existing cablestayed bridge equipped with lead-rubber bearing. In this context, Shipshaw cable-stayed bridge is selected as the case study. The selected bridge has a span of 183.2 m composite deck and 43 m height of steel tower. 2D finite element models of the non-isolated and base isolated bridges are modelled by using SAP2000. Three different near-fault ground motions which are Tabas 1978, Cape Mendocino 1992 and Kobe 1995 were subjected to the 2D FEM models in order to determine the seismic behaviour of the bridge. The near-fault ground motions were applied to the bridge in the longitudinal direction. Nonlinear dynamic analysis was performed to determine the dynamic responses of the bridge. Comparison of dynamic response of nonisolated and base isolated bridge under three different near-fault ground motions were conducted. The results obtained from numerical analyses of the bridge showed that the isolation system lengthened the period of bridge and minimised deck displacement, base shear and base moment of the bridge. It is concluded that the isolation system significantly reduced the destructive effects of near-fault ground motions on the bridge.

A Stochastic Model for Simulating Vertical Pulseless Near-Fault Seismic Ground Motions

2021 ◽  
Author(s):  
Xi Zhong Cui ◽  
Yong Xu Liu ◽  
Han Ping Hong
Keyword(s):  
Stochastic Model ◽  
Ground Motion ◽  
Ground Motions ◽  
Time History ◽  
Structural Deformation ◽  
Time Frequency ◽  
Motion Models ◽  
Near Fault ◽  
Simulation Techniques ◽  
Ground Motion Records

ABSTRACT The vertical near-fault seismic ground-motion component can cause significant structural deformation and damage, which can be evaluated from time history analysis using actual or synthetic ground-motion records. In this study, we propose a new stochastic model for the vertical pulseless near-fault ground motions that depends on earthquake magnitude, rupture distance, and site condition. The proposed model is developed based on the time–frequency characteristics of 606 selected actual vertical record components in strike-slip earthquakes. The use and validation of the model are presented using simulated records obtained by two simulation techniques. For the validation, the statistics of time–frequency-dependent power spectral acceleration estimated from the simulated records using the proposed stochastic model are compared with those from the actual records and the ground-motion models available in the literature.

Identification of Pulse Periods in Near‐Fault Ground Motions Using the HHT Method

2019 ◽  
Vol 109 (6) ◽  
pp. 2384-2398 ◽  
Author(s):  
Xiaoyu Chen ◽  
Dongsheng Wang ◽  
Rui Zhang
Keyword(s):  
Ground Motion ◽  
Time Course ◽  
Ground Motions ◽  
Flexible Structures ◽  
Peak Ground Velocity ◽  
Damage Effect ◽  
Near Fault ◽  
Long Period ◽  
Frequency Components ◽  
Ground Motion Records

Abstract Large‐amplitude and long‐period pulses are observed in velocity time histories of near‐fault ground‐motion records. The pulses in these records have significant damage effect on flexible structures due to their long‐period property; therefore, more attention should be paid to the frequency components in the ground motion. Based on the identification of frequency components in the original record, a new method based on the Hilbert–Huang transform (HHT) is proposed here. A ground‐motion record can be decomposed into several intrinsic mode functions (IMFs) that carry different frequency components by the HHT without contamination from any a prior function. Only two fixed parameters, the peak ground velocity (PGV)/peak ground acceleration (PGA) ratio and the energy change of every IMF, are used to classify pulse‐like ground‐motion records. The inherent pulses of these records can also be extracted, based on the selection of IMFs for which PGV/PGA ratios are larger than 0.12 and energy changes that are greater than 0.1. For multipulse cases, all the pulses can be captured after extracting once, and the time course of inherent pulses can also be obtained. Then, pulse periods are calculated based on the solutions of instantaneous frequency of the peak for the extracted pulses. All the periods obtained using the HHT method can be verified by the results obtained from Baker’s wavelet method. The 24 controversial records that are discussed in previous studies are examined here as well. The HHT method is a complete procedure that includes the classification of pulse‐like ground motions, the extraction of velocity pulses, and the solution of pulse periods. It works well for multipulse records, especially because it can provide the exact timing of all the inherent pulses.

Identification Methods of Important Parameters for Near-Fault Pulse-Type Ground Motions

2012 ◽  
Vol 594-597 ◽  
pp. 1688-1691
Author(s):  
Ming Li ◽  
Qiao Jin ◽  
Yong Liu ◽  
He Yuan ◽  
Zhe Zhe Sun
Keyword(s):  
Ground Motion ◽  
Peak Velocity ◽  
Ground Motions ◽  
Velocity Pulse ◽  
Identification Methods ◽  
Near Fault ◽  
Pulse Type ◽  
Pulse Peak ◽  
Motion Parameters ◽  
Near Fault Ground Motion

during the process of fitting or synthesizing near-fault ground motion，parameters of the equivalent velocity pulse need to be decided based on seismic records．Thus, it is a key problem that how to identify these parameters from the records．Pulse period and pulse peak velocity are important parameters in the equivalent velocity pulse models．In this study，various methods on identifying these parameters are reviewed．It is shown that all the existing methods have limitations，especially for the irregular seismic records．Finally，problems need to be further studied is pointed out.

Three-dimensional simulation of the near-fault ground motion for the 1995 Hyogo-Ken Nanbu (Kobe), Japan, earthquake

1998 ◽  
Vol 88 (2) ◽  
pp. 428-440 ◽  
Author(s):  
Arben Pitarka ◽  
Kojiro Irikura ◽  
Tomotaka Iwata ◽  
Haruko Sekiguchi
Keyword(s):  
Ground Motion ◽  
Velocity Structure ◽  
Ground Motions ◽  
Three Dimensional ◽  
High Amplitude ◽  
Near Fault ◽  
Basin Edge ◽  
Dimensional Simulation ◽  
Near Fault Ground Motion ◽  
East West

Abstract The 17 January 1995 Hyogo-ken Nanbu earthquake is a typical example showing that the ground motions along basin-edge faults can be very destructive. In this study, we simulate the near-fault ground motion from this earthquake based on a kinematic fault model and a simplified 3D velocity structure of the Kobe area. The kinematic earthquake rupture and the wave propagation are modeled using a 3D finite-difference method (FDM). Our simulation identifies the basin-edge effect as an important factor that influenced the ground-motion amplification pattern in the Kobe area. We found that the coupling of the source directivity and basin-edge effects causes impulsive ground motions with extremely high amplitude at periods greater than 1 sec and in a narrow zone offset less than 1 km from the basin edge. The combination of these effects acted to create a fairly continuous band of amplification that extends about 30 km in an elongated zone parallel to the basin-edge boundary. In some areas, localized site effects might have been as important as the abovementioned effects, but they cannot explain the continuity of the extended east-west zone of damage.

Seismic Response of a Base Isolated Cable-Stayed Bridge Under Near-Fault Ground Motion Excitations

2018 ◽  
Vol 15 (1) ◽  
pp. 1
Author(s):  
Ahad Javanmardi ◽  
Zainab Ibrahim ◽  
Khaled Gheadi ◽  
Mohammed Jameel ◽  
Usman Hanif ◽  
...  
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Nonlinear Dynamic Analysis ◽  
Dynamic Responses ◽  
Base Shear ◽  
Seismic Behaviour ◽  
Isolation System ◽  
Near Fault ◽  
Cable Stayed Bridge ◽  
Near Fault Ground Motion

Nowadays, development of cable-stayed bridges is increasing around the world. The mitigation of seismic forces to these bridges are obligatory to prevent damages or failure of its structural members. Herein, this paper aimed to determine the near-fault ground motion effect on an existing cable-stayed bridge equipped with lead-rubber bearing. In this context, Shipshaw cable-stayed bridge is selected as the case study. The selected bridge has a span of 183.2 m composite deck and 43 m height of steel tower. 2D finite element models of the non-isolated and base isolated bridges are modelled by using SAP2000. Three different near-fault ground motions which are Tabas 1978, Cape Mendocino 1992 and Kobe 1995 were subjected to the 2D FEM models in order to determine the seismic behaviour of the bridge. The near-fault ground motions were applied to the bridge in the longitudinal direction. Nonlinear dynamic analysis was performed to determine the dynamic responses of the bridge. Comparison of dynamic response of non-isolated and base isolated bridge under three different near-fault ground motions were conducted. The results obtained from numerical analyses of the bridge showed that the isolation system lengthened the period of bridge and minimised deck displacement, base shear and base moment of the bridge. It is concluded that the isolation system significantly reduced the destructive effects of near-fault ground motions on the bridge.

Study on Long-Period Inelastic Spectra of near-Fault Pulse-Like Strong Ground Modeled Using Analytical Model

2011 ◽  
Vol 374-377 ◽  
pp. 2316-2319
Author(s):  
Chun Feng Li ◽  
Wei Xin Tian ◽  
Zhuo Lin
Keyword(s):  
Ground Motion ◽  
Analytical Model ◽  
Ground Motions ◽  
Near Field ◽  
Near Fault ◽  
Long Period ◽  
Acceleration Time Histories ◽  
Long Period Ground Motion ◽  
Ground Motion Records ◽  
Strong Ground

Because the parameters of Mavroeidis analytical model of pulse-like strong ground motion have an unambiguous physical meaning, the analytical model has been calibrated using a large number of actual near-field ground-motion records, and It can successfully simulate available near-fault pulse-like acceleration time histories, in this paper, we synthesize ground motions using the model to investigate elasto-plastic earthquake responses of long period single-degree-of-freedom system to the pulse-like ground motions, revealing the elasto-plastic long-period ground motion characteristics of pulse-like ground motion.

Sign in / Sign up

Export Citation Format

Share Document