A Stochastic Model for Simulating Vertical Pulseless Near-Fault Seismic Ground Motions

2021 ◽  
Author(s):  
Xi Zhong Cui ◽  
Yong Xu Liu ◽  
Han Ping Hong
Keyword(s):  
Stochastic Model ◽  
Ground Motion ◽  
Ground Motions ◽  
Time History ◽  
Structural Deformation ◽  
Time Frequency ◽  
Motion Models ◽  
Near Fault ◽  
Simulation Techniques ◽  
Ground Motion Records

ABSTRACT The vertical near-fault seismic ground-motion component can cause significant structural deformation and damage, which can be evaluated from time history analysis using actual or synthetic ground-motion records. In this study, we propose a new stochastic model for the vertical pulseless near-fault ground motions that depends on earthquake magnitude, rupture distance, and site condition. The proposed model is developed based on the time–frequency characteristics of 606 selected actual vertical record components in strike-slip earthquakes. The use and validation of the model are presented using simulated records obtained by two simulation techniques. For the validation, the statistics of time–frequency-dependent power spectral acceleration estimated from the simulated records using the proposed stochastic model are compared with those from the actual records and the ground-motion models available in the literature.

scholarly journals Simulation of non-stationary stochastic ground motions based on recent Italian earthquakes

2021 ◽  
Author(s):  
Fabio Sabetta ◽  
Antonio Pugliese ◽  
Gabriele Fiorentino ◽  
Giovanni Lanzano ◽  
Lucia Luzi
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Strong Motion ◽  
Stochastic Simulations ◽  
Model Parameters ◽  
Motion Model ◽  
Arias Intensity ◽  
Time Frequency ◽  
Ground Motion Model ◽  
Ground Motion Records

AbstractThis work presents an up-to-date model for the simulation of non-stationary ground motions, including several novelties compared to the original study of Sabetta and Pugliese (Bull Seism Soc Am 86:337–352, 1996). The selection of the input motion in the framework of earthquake engineering has become progressively more important with the growing use of nonlinear dynamic analyses. Regardless of the increasing availability of large strong motion databases, ground motion records are not always available for a given earthquake scenario and site condition, requiring the adoption of simulated time series. Among the different techniques for the generation of ground motion records, we focused on the methods based on stochastic simulations, considering the time- frequency decomposition of the seismic ground motion. We updated the non-stationary stochastic model initially developed in Sabetta and Pugliese (Bull Seism Soc Am 86:337–352, 1996) and later modified by Pousse et al. (Bull Seism Soc Am 96:2103–2117, 2006) and Laurendeau et al. (Nonstationary stochastic simulation of strong ground-motion time histories: application to the Japanese database. 15 WCEE Lisbon, 2012). The model is based on the S-transform that implicitly considers both the amplitude and frequency modulation. The four model parameters required for the simulation are: Arias intensity, significant duration, central frequency, and frequency bandwidth. They were obtained from an empirical ground motion model calibrated using the accelerometric records included in the updated Italian strong-motion database ITACA. The simulated accelerograms show a good match with the ground motion model prediction of several amplitude and frequency measures, such as Arias intensity, peak acceleration, peak velocity, Fourier spectra, and response spectra.

Identification of Pulse Periods in Near‐Fault Ground Motions Using the HHT Method

2019 ◽  
Vol 109 (6) ◽  
pp. 2384-2398 ◽  
Author(s):  
Xiaoyu Chen ◽  
Dongsheng Wang ◽  
Rui Zhang
Keyword(s):  
Ground Motion ◽  
Time Course ◽  
Ground Motions ◽  
Flexible Structures ◽  
Peak Ground Velocity ◽  
Damage Effect ◽  
Near Fault ◽  
Long Period ◽  
Frequency Components ◽  
Ground Motion Records

Abstract Large‐amplitude and long‐period pulses are observed in velocity time histories of near‐fault ground‐motion records. The pulses in these records have significant damage effect on flexible structures due to their long‐period property; therefore, more attention should be paid to the frequency components in the ground motion. Based on the identification of frequency components in the original record, a new method based on the Hilbert–Huang transform (HHT) is proposed here. A ground‐motion record can be decomposed into several intrinsic mode functions (IMFs) that carry different frequency components by the HHT without contamination from any a prior function. Only two fixed parameters, the peak ground velocity (PGV)/peak ground acceleration (PGA) ratio and the energy change of every IMF, are used to classify pulse‐like ground‐motion records. The inherent pulses of these records can also be extracted, based on the selection of IMFs for which PGV/PGA ratios are larger than 0.12 and energy changes that are greater than 0.1. For multipulse cases, all the pulses can be captured after extracting once, and the time course of inherent pulses can also be obtained. Then, pulse periods are calculated based on the solutions of instantaneous frequency of the peak for the extracted pulses. All the periods obtained using the HHT method can be verified by the results obtained from Baker’s wavelet method. The 24 controversial records that are discussed in previous studies are examined here as well. The HHT method is a complete procedure that includes the classification of pulse‐like ground motions, the extraction of velocity pulses, and the solution of pulse periods. It works well for multipulse records, especially because it can provide the exact timing of all the inherent pulses.

Comparison of Near-Fault Velocity Pulse-Like Ground Motions from the 2018 Mw 6.4 Hualien, Taiwan, Earthquake with the Next Generation Attenuation (NGA)-West2 Ground-Motion Models and Directivity Models

2021 ◽  
Author(s):  
Xiaofen Zhao ◽  
Zengping Wen ◽  
Junju Xie ◽  
Quancai Xie ◽  
Kuo-En Ching
Keyword(s):  
Ground Motion ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Spectral Shape ◽  
Next Generation ◽  
Motion Models ◽  
Near Fault ◽  
Short Period ◽  
Shape Curve ◽  
Ground Motion Models

ABSTRACT Pulse-like ground motions cause severe damage in structures at certain periods. Hence, pulse effects need to be considered during probabilistic seismic hazard analysis and seismic design in the near-fault region. Traditional ground-motion models used to quantify the hazard posed by pulse-like ground motions may underestimate them, but they are relatively suitable for describing the residual ground motions after extracting pulses. Nevertheless, the applicability of Next Generation Attenuation-West2 Project (NGA-West2) models to pulse and residual ground motions has not been evaluated. Moreover, the applicability of recently developed directivity models, including the Shahi and Baker (2011; hereafter, SB2011), Chang et al. (2018; hereafter, Chang2018), and Rupakhety et al. (2011; hereafter, Rupakhety2011) models, has not been investigated for this event. Here, based on the abundance of pulse-like ground motions recorded during the Mw 6.4 Hualien earthquake, the applicability of NGA-West2 models and directivity models was quantitatively evaluated. In summary, (1) The applicability of NGA-West2 models to the observed original and residual ground motions varies significantly at different periods. The suggests that NGA-West2 models overestimate the original and residual ground motions for short periods (T<1.0  s), but are suitable for describing the residual ground motions yet underestimate the original ground motions for long periods (T≥1.0  s). (2) Pulse periods and amplification bands due to pulses are unusually larger than previous events. Similar to the Chang2018 model, the plateau of this event starts and ends at the periods of 0.70 and 1.1 times the pulse period. However, the Chang2018 and SB2011 models underestimate the constant ordinate of this plateau. Spectral ordinates of the spectral shape curve due to pulses for the short period (∼Tn<1.3  s) are smaller than the predictions from the Rupakhety2011 model. The trend was reversed for long periods (∼Tn>3.0  s). Compared with the Rupakhety2011 model, the peak location of the spectral shape curve is shifted to the long period. These results will be helpful for updating these models in the near future.

Study on Long-Period Inelastic Spectra of near-Fault Pulse-Like Strong Ground Modeled Using Analytical Model

2011 ◽  
Vol 374-377 ◽  
pp. 2316-2319
Author(s):  
Chun Feng Li ◽  
Wei Xin Tian ◽  
Zhuo Lin
Keyword(s):  
Ground Motion ◽  
Analytical Model ◽  
Ground Motions ◽  
Near Field ◽  
Near Fault ◽  
Long Period ◽  
Acceleration Time Histories ◽  
Long Period Ground Motion ◽  
Ground Motion Records ◽  
Strong Ground

Because the parameters of Mavroeidis analytical model of pulse-like strong ground motion have an unambiguous physical meaning, the analytical model has been calibrated using a large number of actual near-field ground-motion records, and It can successfully simulate available near-fault pulse-like acceleration time histories, in this paper, we synthesize ground motions using the model to investigate elasto-plastic earthquake responses of long period single-degree-of-freedom system to the pulse-like ground motions, revealing the elasto-plastic long-period ground motion characteristics of pulse-like ground motion.

The Influence of near-Fault Ground Motions on the Seismic Response of Reinforced Concrete Frame

2011 ◽  
Vol 90-93 ◽  
pp. 2633-2639
Author(s):  
Chang Hao Zhang ◽  
Wei Wang ◽  
Hu Wang ◽  
Xun Tao Wang
Keyword(s):  
Reinforced Concrete ◽  
Ground Motion ◽  
Ground Motions ◽  
Time History ◽  
Far Field ◽  
Base Shear ◽  
Reinforced Concrete Frame ◽  
Structural Dynamic ◽  
Concrete Frame ◽  
Near Fault

This paper examined the engineering characteristics of the near-fault ground motion. The four-story reinforced concrete frame was designed under Code for seismic design of building (GB50011-2010).The SAP2000 software was applied to model it, and the nonlinear time history analyses of structure were implemented. Near-fault ground motions with forward directivity and fling-step and far field ground motions were selected as seismic inputs．The results show that in terms of some structural dynamic response parameters, such as the vertex displacement, between the corner of the layer displacement, and the base shear et al., the structural responses to the ground motion with near-fault are increased by considerable magnitudes when the seismic responses of structures step into the elastic-plastic stage, compared with far-field ground motion, and the influence of damaging the mid-lower structure is significantly greater.

Correlation of Near-Fault Ground Motions for Western United States

2012 ◽  
Author(s):  
Yin-Nan Huang
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Correlation Coefficients ◽  
Nuclear Facilities ◽  
Design Standards ◽  
Near Fault ◽  
History Analysis ◽  
Orthogonal Components ◽  
Response History Analysis ◽  
Ground Motion Records

Design standards for safety-related nuclear facilities such as ASCE Standard 4-98 and ASCE Standard 43-05 require the correlation coefficient for two orthogonal components of ground motion for response-history analysis to be less than 0.3. The technical basis of this requirement was developed by Hadjian three decades ago using 50 pairs of recorded ground motions that were available at that time. Since then a significant number of ground-motion records have been acquired. The limiting value of 0.3 presented in ASCE Standards 4-98 and 43-05 is re-evaluated in this study using records from large ground-motion databases compiled recently for the near-fault WUS sites. In the past several years, research has addressed the correlation of spectral demand at different periods as well as its impact on the performance of structures. In this paper, the correlation coefficients of maximum spectral demands at different periods were computed and compared with those for geomean spectral demand developed by Baker and Jayaram.

scholarly journals Effectiveness of earthquake selection and scaling method in New Zealand

2007 ◽  
Vol 40 (3) ◽  
pp. 160-171 ◽  
Author(s):  
Rajesh P. Dhakal ◽  
Sandip Singh ◽  
John B. Mander
Keyword(s):  
New Zealand ◽  
Ground Motion ◽  
Ground Motions ◽  
Time History ◽  
Seismic Demand ◽  
Scaling Method ◽  
Ground Acceleration ◽  
Seismic Demands ◽  
Least Squares Fit ◽  
Ground Motion Records

In New Zealand, time history analysis is either the required or preferred method of assessing seismic demands for torsionally sensitive and other important structures, but the criteria adopted for the selection of ground motion records and their scaling to generate the seismic demand remains a contentious and debatable issue. In this paper, the scaling method based on the least squares fit of response spectra between 0.4-1.3 times the structure’s first mode period as stipulated in the New Zealand Standard for Structural Design Actions: Earthquake Actions (NZS1170.5) [1] is compared with the scaling methods in which ground motion records are scaled to match the peak ground acceleration (PGA) and spectral acceleration response at the natural period of the structure corresponding to the first mode with 5% of critical damping; i.e. Sa(T1, 5%). Incremental dynamic analysis (IDA) is used to measure the record-to-record randomness of structural response, which is also a measure of the efficiency of the intensity measure (IM) used. Comparison of the dispersions of IDA curves with the three different IMs; namely PGA, Sa(T1, 5%) and NZS1170.5 based IM, shows that the NZS1170.5 scaling method is the most effective for a large suite of ground motions. Nevertheless, the use of only three randomly chosen ground motions as presently permitted by NZS1170.5 is found to give significantly low confidence in the predicted seismic demand. It is thus demonstrated that more records should be used to provide a robust estimate of likely seismic demands.

scholarly journals Evolution law of overall damage of concrete gravity dam under near-fault ground motion

2021 ◽  
Author(s):  
Yafei Zhai ◽  
Liaojun Zhang ◽  
Hanyun Zhang ◽  
Tianxiao Ma ◽  
Binghui Cui
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Gravity Dam ◽  
Gravity Dams ◽  
Near Fault ◽  
Concrete Gravity Dams ◽  
Fling Step ◽  
Ground Motion Records ◽  
Near Fault Ground Motion ◽  
Dynamic Damage

Abstract Strong earthquake cases of concrete gravity dams show that the foundation damage has an important influence on the seismic response and damage characteristics of the dam body. Compared with non-pulse ground motions, pulse-like near-fault ground motions have a wider response spectrum sensitive zone, which will cause more modes of the structure to respond, resulting in more serious damage to the structure. In order to study the real dynamic damage characteristics of concrete gravity dams under the action of near-fault ground motions, this paper takes Koyna gravity dam as the object and establishes a multi-coupling simulation model that can reasonably reflect the dynamic damage evolution process of dam concrete and foundation rock mass. A total of 12 near-fault ground motion records with three types of rupture directivity pulse, fling-step pulse and non-pulse are selected, deep research on the overall damage evolution law of concrete gravity dams. Considering the additional influence of different earthquake mechanisms, different site types and other factors on the study, the selected ground motion records are from the same seismic events (Chi-Chi), the same direction but different stations. The results show that the foundation of the concretes gravity dam often get damaged before the dam body under the action of strong earthquakes. Compared with the near-fault non-pulse ground motion, the structural damage of the gravity dam under the action of the near-fault directivity pulse ground motion is significantly increased, and causes greater damage and displacement response to the dam body. The near-fault fling-step pulse ground motion has the least impact on the dynamic response of the gravity dam structure.

Identification of Near-Field Pulse-Like Ground Motions Recorded at Bajiao Station during the Mainshock of the Great Wenchuan Earthquake

2011 ◽  
Vol 250-253 ◽  
pp. 2546-2553 ◽  
Author(s):  
Chun Feng Li ◽  
Yong Bo Li
Keyword(s):  
Wenchuan Earthquake ◽  
Ground Motion ◽  
Strong Ground Motion ◽  
Ground Motions ◽  
Near Field ◽  
Velocity Pulse ◽  
Field Pulse ◽  
Near Fault ◽  
Ground Motion Records ◽  
Strong Ground

When earthquake occurs, it is in near-fault that the most serious damage happens and velocity pulse appears. Velocity pulse could have huge potential to destroy the structure in near-fault. The set of records at Bajiao Station is one of the three famous near-field sets of strong ground motion records whose PGAs are the largest in all the sets of records obtained from the mainshock of the Great Wenchuan Earthquake. Our research is to identify the pulse-like characteristics from the set of records at Bajiao Station. It is found that velocity pulses in the records are “hidden pulses”.

scholarly journals Variation of Near Fault Ground Motion Intensity Measures Due to Filtering

2020 ◽  
Vol 3 (2) ◽  
pp. 841-849
Author(s):  
Esengul Cavdar ◽  
Gokhan Ozdemir ◽  
Ozkan Kale
Keyword(s):  
Ground Motion ◽  
Ground Motions ◽  
Low Frequency ◽  
Frequency Noise ◽  
Intensity Measures ◽  
Near Fault ◽  
Cutting Frequency ◽  
Ground Motion Records ◽  
Near Fault Ground Motion ◽  
High Pass

Ground motions recorded at near fault zones ensures rich low frequency contents, and high velocity pulse signals which may result in large shear force and displacement demands in structural elements. During the recording of these seismic events by accelerometers, low-frequency noise may sometimes accompany the signal. Thus, extracting this noise from recorded acceleration data is a crucial step of post-processing performed prior to use of acceleration time series in structural analyses for both design or assessment purpose. The objective of this study is to assess the effect of high-pass filtering on the intensity measures of ground motions. A set of near fault ground motions that comprises both pulse-like and non-pulse like characteristics were selected and they were subjected to filtering for various cutting frequency contents. As a function of filtering, variation in several intensity measures of filtered ground motions namely, PGD, PGV, PGA, PGV/PGA and significant duration were analyzed. It is revealed that changing the cutting frequency of high pass filtering considerably changes the intensity measures of ground motion records.

Sign in / Sign up

Export Citation Format

Share Document