scholarly journals Direct Isomaltulose Synthesis From Beet Molasses by Immobilized Sucrose Isomerase

Author(s):  
Qin-Qing Wang ◽  
Ming Yang ◽  
Jian-Hua Hao ◽  
Zai-Chao Ma

Isomaltulose is becoming a focus as a functional sweetener for sucrose substitutes; however, isomaltulose production using sucrose as the substrate is not economical. Low-cost feedstocks are needed for their production. In this study, beet molasses (BM) was introduced as the substrate to produce isomaltulose for the first time. Immobilized sucrose isomerase (SIase) was proved as the most efficient biocatalyst for isomaltulose synthesis from sulfuric acid (H2SO4) pretreated BM followed by centrifugation for the removal of insoluble matters and reducing viscosity. The effect of different factors on isomaltulose production is investigated. The isomaltulose still achieved a high concentration of 446.4 ± 5.5 g/L (purity of 85.8%) with a yield of 0.94 ± 0.02 g/g under the best conditions (800 g/L pretreated BM, 15 U immobilized SIase/g dosage, 40°C, pH of 5.5, and 10 h) in the eighth batch. Immobilized SIase used in repeated batch reaction showed good reusability to convert pretreated BM into isomaltulose since the sucrose conversion rate remained 97.5% in the same batch and even above 94% after 11 batches. Significant cost reduction of feedstock costs was also confirmed by economic analysis. The findings indicated that this two-step process to produce isomaltulose using low-cost BM and immobilized SIase is feasible. This process has the potential to be effective and promising for industrial production and application of isomaltulose as a functional sweetener for sucrose substitute.

2000 ◽  
Vol 40 (1) ◽  
pp. 481
Author(s):  
L.C. Rathie ◽  
G.F. Hogan ◽  
M.J. Paton

A number of floating production facility concepts can be readily applied to the development of small and marginal oilfields in moderately deep tropical waters. These concepts can be used to extend the lives of existing mature fields. They can be deployed for a significant cost reduction compared with a conventional full field development provided that boundary limits for application of the concepts are not exceeded.Simple, standardised, reliable and proven equipment should be utilised that may be deployed in innovative ways. Wherever possible, existing equipment should be used and rented where this is economical.Marginal field projects should be managed and operated by small organisations competent in these activities to minimise overheads and maximise flexibility.An inter-field transfer approach (Ocean Truck) offers many options for developing a number of such projects as part of an area development strategy.Cooperation between operators, both as partners in a particular project and in different projects where the same facilities can be used sequentially or in parallel, can be an effective means to control costs and ensure that small oil accumulations are developed.


2013 ◽  
Vol 330 ◽  
pp. 839-842
Author(s):  
O.M.F. Marwah ◽  
S. Sharif ◽  
M. Ibrahim ◽  
M.H. Idris

Direct rapid investment casting (IC) is among the favorable and economical casting process due to its flexibility in fabricating any geometrical part features within a shorter lead time. Polymer based materials used in rapid prototyping (RP) technologies are exhibiting significant cost reduction for low volume production and are potentially replacing conventional wax materials as sacrificial patterns in IC process. This paper reports on the collapsibility characteristics of acrylate patterns during the burnout process for IC molds. The acrylate based patterns were fabricated by a Multijet Modelling (MJM) process with hollow internal structure. The MJM patterns were then Slurry procedure were introduced for producing toughest ceramic mould to prevent cracking occurrence. Results showed that the acrylate patterns start to decomposed gradually from the ceramic mold at 350°C and at 600°C, a total clean burnout without any residues and ash content was attained. This study shows that acrylate patterns built from RP technologies are suitable for fabricating ceramic molds and are highly potential in substituting conventional wax for IC process.


2021 ◽  
Author(s):  
Muhammad Hatta Mhd Yusof ◽  
M Zulfarid Khalid ◽  
Rahimah A. Halim ◽  
Nurfaridah Ahmad Fauzi ◽  
Ahgheelan Sella Thurai ◽  
...  

Abstract This paper will discuss the case study of two (2) projects in Malaysia that were stretched-to-limit and optimized ‘on-paper’ all the wells’ related engineering design and construction, operation activities pre and during drilling campaign as well as logistic arrangement, which led to significant cost reduction in wells and thus improving the overall project economics. This significant savings achieved with full compliance to technical standards as well as with the betterment to improve HSE during offshore execution.


2005 ◽  
Vol 6 (4) ◽  
pp. 397-400
Author(s):  
Antonio Uneddu ◽  
Tito Antonio Paolini

The aim of the present work is to report preliminary results about the administration of an insulin analogue, LisPro, to treat diabetic chetoacidosis. This new procedure, in respect to insulin continuous infusion, allow significant cost reduction in terms of medical and nurses time dedicated to the patient and hospitalization length. In our experience, LisPro treatment compared to the standard of care, has allowed hospital time reduction of 2,1 days per patient. This can be translated in cost saving of about 700,00 euro per case. These preliminary data, replicating the results coming from published international experiences, have to be confirmed in our country through the implementation of more representative studies


Sign in / Sign up

Export Citation Format

Share Document