scholarly journals Dual-Band Antenna Integrated With Solar Cells for WLAN Applications

2021 ◽  
Vol 9 ◽  
Author(s):  
Wenxing An ◽  
Hui Wang ◽  
Yu Luo
Keyword(s):  
Solar Cells ◽  
Radiation Pattern ◽  
Local Area Network ◽  
Dual Band ◽  
Area Network ◽  
Potential Candidate ◽  
Antenna Structure ◽  
Dual Band Antenna ◽  
Lower Band ◽  
5 Ghz

A single-port dual-band antenna integrated with solar cells is reported for the 2.4/5-GHz wireless local area network (WLAN) applications. Thirty solar cells are adopted and integrated into the antenna structure for both energy harvesting and wireless communication. The solar cells can act as a director for the lower band, and the main radiation structure for the higher band. The slot and microstrip antennas are incorporated into the compact structure and multiple resonant modes are utilized for dual-band performance. The measurement results show that the lower band is from 2.27 to 2.5 GHz with an omnidirectional radiation pattern and the upper band is from 4.8 to 6.9 GHz with a directional radiation pattern. The proposed solar cell antenna can provide a dual-band performance with the ability of DC power generation, which can be a potential candidate for future green low-carbon communication.

scholarly journals A Dual-band Planar Antenna for Wireless Local Area Network Applications

2019 ◽  
Vol 9 (2) ◽  
pp. 105-111
Author(s):  
Yasser A. Fadhel
Keyword(s):  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dual Band ◽  
Handheld Devices ◽  
Area Network ◽  
Network Applications ◽  
Dual Band Antenna

Wireless local area network (WLAN) communication is one of the fast and secure wireless technologies, which is vastly used in nowadays portable and handheld devices. This paper is oriented on designing of a planar WLAN antenna to serve in WLAN network devices. The designed antennas are single and dual-band planar monopole antennas to be working at IEEE 802.11 WLAN frequencies; 2.45 GHz and 5.2/5.8 GHz bands. Different configurations have been used in the design process, especially for the dual-band antenna, where dual-resonant is required. The antennas have been designed analytically then simulated using the CST software package. Simulation results for the input reflection coefficient, realized gain, and radiation pattern have been considered to evaluate their features. The antennas have also been fabricated practically and practical measurements for the input reflection coefficient and radiation pattern have been taken which shown a good agreement with those of simulation.

Analysis of electromagnetic absorption in new design of PIFA antenna using metamaterials

2021 ◽  
Author(s):  
Hamza Ben Hamadi ◽  
said ghnimi ◽  
Lassaad Latrach ◽  
Philippe Benech ◽  
Ali Gharsallah
Keyword(s):  
Human Body ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Dual Band Antenna ◽  
Cubic Model ◽  
The Impact ◽  
Pifa Antenna

Abstract This paper presents the design, simulation and fabrication of a miniaturized wearable dual-band antenna on a semi-flex substrate; she is operable at 2.45/5.8 GHz for wireless local area network applications. The electrical and radiation characteristics of this proposed antenna were obtained by means of a technical of insertion of a slot to tune the operating frequencies. To study the impact of the electromagnetic radiation of the structure of the human body, it is necessary to minimize the back radiation towards the user. Therefore, in this work, a multi-band artificial magnetic conductor (AMC) was placed directly above a dual-band planar inverted F antenna to achieve a miniaturization with excellent radiation performance. The simulation results were designed and simulated using Studio commercial software (CST). A good agreement was achieved between the results of simulation and the experimental. The Comparison of measurement results indicates that the gain improved from 1,84 dB to 3,8 dB, in the lower band, and from 2,4 dB to 4,1 in the upper band, when the antenna is backed by the AMC plane. The front-to-back ratio of the AMC backed PIFA antenna was also enhanced. Then, to ensure that the proposed AMC is harmless to the human body, this prototype was placed on three-layer human tissue cubic model. It was observed that the through inclusion of plane AMC, the peak specific absorption rate (SAR) decreased to 1,45 and 1,1 W/kg at 2,45 and 5.8 GHz, respectively (a reduction of around 3,7 W/kg, compared with an antenna without (AMC).

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals A Compact Semi-Circular and Arc-Shaped Slot Antenna for Heterogeneous RF Front-Ends

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1123 ◽  
Author(s):  
Zebiri ◽  
Sayad ◽  
Elfergani ◽  
Iqbal ◽  
Mshwat ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Personal Communication ◽  
Local Area ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Antenna Structure ◽  
High Frequency Structure Simulator

In this paper, a new miniaturized compact dual-band microstrip slot antenna is presented. To achieve the dual-band characteristics, two adjunct partial arc-shaped small slots are joined to two main circular slots embedded in the ground of the antenna structure. With a reduced size of 30 × 28.5 × 0.8 mm3, the proposed antenna presents a dual-band characteristic. The design is optimized using a High Frequency Structure Simulator (HFSS) followed by experimental verifications. An impedance bandwidth, for S11≤10 dB, that covers the 1.8 GHz and 2.4 GHz bands is accomplished, which makes the proposed antenna basically suitable for hand-held devices and medical applications. More applications such as digital communication system (DCS) 1.71–1.88 GHz, personal communication services (PCS) 1.85–1.99 GHz, Universal and mobile telecommunications system UMTS 1.92–2.17 GHz, Bluetooth 2.4–2.5 GHz, and Wi-Fi 2.4–2.454 GHz, Industrial Scientific and Medical radio frequency (RF) band ISM-2.4 GHz, Wireless Local Area Network (WLAN-2.4)are possible by simply changing one of the geometrical antenna dimensions. The antenna is characterized by stable radiation patterns as well.

Novel compact dual-band-notched ultra-wideband printed antenna with a parasitic circular ring strip

2015 ◽  
Vol 9 (2) ◽  
pp. 357-363 ◽  
Author(s):  
Zhijun Tang ◽  
Xiaofeng Wu ◽  
Zaifang Xi ◽  
Shigang Hu
Keyword(s):  
Local Area Network ◽  
Ground Plane ◽  
Circular Ring ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Network Systems ◽  
Antenna Structure ◽  
Rectangular Patch ◽  
Rectangular Slit

A simple and compact printed ultra-wideband antenna with dual-band-notched characteristics is presented. The proposed antenna is composed of a rectangular patch and a modified ground plane. The rectangular patch is etched onto a lossy FR4 substrate. A circular ring strip parasitizes the rectangular patch embedded by a U-shaped slot. Two inverted-L slits and a rectangular slit are embedded onto the ground plane. Some bandwidth enhancement and band-notched techniques are applied in the antenna structure for broadening the bandwidth and generating notches. The simulated and measured results show that the proposed antenna offers a very wider bandwidth ranging from 3.04 to 17.30 GHz, defined by the return loss less than −10 dB, with dual-notched bands of 3.30–4.20 and 5.10–5.85 GHz covering the 3.3/3.7 GHz WiMAX, 3.7/4.2 GHz C-band, and 5.2/5.8 GHz wireless local area network systems. Furthermore, the proposed antenna presents relatively high antenna gain and quasi-omnidirectional radiation patterns.

scholarly journals Dual Polarized Monopole Patch Antennas for UWB Applications with Elimination of WLAN Signals

2016 ◽  
Vol 5 (1) ◽  
pp. 46 ◽  
Author(s):  
P. Kumar ◽  
J. L. Masa-Campos
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ultra Wideband ◽  
Area Network ◽  
Optimized Design ◽  
Patch Antennas ◽  
Antenna Structure ◽  
Dual Polarized ◽  
Uwb Applications ◽  
5 Ghz

This paper presents the design, fabrication and measurement of dual polarized microstrip patch antennas for ultra wideband (UWB) applications with notch at 5-6 GHz band. The proposed antenna rejects the wireless local area network (WLAN) signals and work properly in the entire remaining ultra-wideband. Two antennas are designed for two different frequency bands of ultra wideband and both antennas together produce the entire ultra wideband with notch at 5-6 GHz band. The antennas are fed by a 50 coaxial probe and the entire design is optimized using CST Microwave Studio. The bandwidth of 3.1-5 GHz is achieved by the optimized design of Antenna-1 and the bandwidth of 6 -10.6 GHz is achieved by the optimized design of Antenna-2. The bandwidth of the optimized combined antenna is 3.1-10.6 GHz with elimination of the 5-6 GHz band. Both antennas are simulated, developed and measured. The simulated and measured results are presented. The two designed dual polarized antennas i.e. Antenna-1 and Antenna-2 can be used for 3.1-5 GHz band and 6-10.6 GHz band dual polarized applications, respectively, and the combined antenna structure can be used for UWB dual polarized applications with elimination of 5-6 GHz band signals.

COMPACT DUAL-BAND DIELECTRIC RESONATOR ANTENNA FOR 2.4/5.8 GHZ WLAN APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
A. Mataria ◽  
M. R. Kamarudin ◽  
M. Khalily
Keyword(s):  
Radio Frequency Identification ◽  
Dielectric Resonator ◽  
Local Area Network ◽  
Monopole Antenna ◽  
Dual Band ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dielectric Resonator Antenna ◽  
Dual Band Antenna

Design of a Dual-Band Dielectric Resonator Antenna (DRA) for the radio-frequency identification (RFID) and wireless local area network (WLAN) is presented. The necessity of a compact sized dual-band antenna is to allow the manufacturers to produce small size high-performance WLAN access points. The proposed antenna consists of printed T-Shaped monopole antenna and rectangular dielectric resonator to operate simultaneously at 2.4 and 5.8 GHz. The monopole antenna was printed on a standard 1.6 mm FR4 substrate material. Impedance bandwidth for -10 dB return loss in the 2.35 GHz and 5.86 GHz center frequency reaches 0.25 GHz (2.22 GHz to 2.47 GHz) and 0.28 GHz (5.72 GHz to 6 GHz), respectively. A good agreement is achieved between measured and simulated results.  This compact antenna fed by a 50 Ω microstrip line is a low-profile and easy to manufacture antenna.

Sign in / Sign up

Export Citation Format

Share Document