scholarly journals Anti-Browning and Oxidative Enzyme Activity of Rice Bran Extract Treatment on Freshly Cut ‘Fuji’ Apple

Agronomy ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 86
Author(s):  
Sang Hoon Lee ◽  
Soo Min Baek ◽  
Inhye Jeong ◽  
Wan Heo ◽  
Kyung-A Hwang ◽  
...  

Preserving the quality of freshly cut fruits is essential for food marketing. This study aimed to evaluate the anti-browning effect of rice bran extract (RE) added to a vitamin C mixture (VCM), which is widely used as an anti-browning agent. Freshly cut apples were prepared using the following processes: raw material selection, washing, cutting, soaking, and packaging. A comparison of cut apples soaked with 3% VCM combined with 1% RE (VR) and cut apples treated with 4% VCM showed that the L* and BI values had similar levels. After 12 days of storage, the amount of yeast and mold in cut apples after 4% VCM and VR treatment was 6.15 × 104 ± 0.48 CFU/mL and 4.25 × 103 ± 0.15 CFU/mL, respectively, and the degree of bacterial growth was reduced by VR treatment. On day 12 of storage, the activities of polyphenol oxidase (PPO) and peroxidase (POD) were similar in the 4% VCM and VR groups. The polyphenol content was significantly higher in the VR group (121.0 ± 2.2) than in the 4% VCM group (76.9 ± 2.2). These results indicate that VR treatment for freshly cut apples is a potential alternative to 4% VCM treatment, with an effective anti-browning capacity and improved polyphenol content.

Antiquity ◽  
2000 ◽  
Vol 74 (284) ◽  
pp. 372-379 ◽  
Author(s):  
S. Miller-Antonio ◽  
L. A. Schepartz ◽  
D. Bakken

Research in Dadong Cave, southern China, has revealed evidence suggesting that nonlithic materials were used in the tool kits of the Chinese Lower Palaeolithic.


1995 ◽  
Vol 33 (12) ◽  
pp. 3301-3310
Author(s):  
R. CHEN ◽  
O. HAWALESHKA ◽  
D. STRONG

2002 ◽  
Vol 25 (2) ◽  
pp. 169-179 ◽  
Author(s):  
Umesh Kumar

Copper (Cu) based pastes have emerged as the termination materials of choice for ceramic capacitors with base metal internal electrodes. To prevent oxidation of nickel (Ni) internal electrode and the copper terminations, it is necessary to fire the terminations in a nitrogen atmosphere. This requirement places significant restrictions on raw material selection for the termination pastes. For example, acrylic-based resins are used as organic binder for their clean burning characteristics over the traditional ethyl cellulose based binder system. As the viscoelastic behavior of acrylic resin systems are different to those of cellulose systems, differences are observed in the flow behavior of the paste. In this paper, the influence of paste rheology on the green cosmetic defects such as mooning, peaking, etc. is discussed. Additionally, the influence of process condition such as dipping parameters, drying conditions etc., on the green cosmetic defects are discussed. Finally, properties of a copper termination, which can be processed between 800–825°C, are discussed.


2013 ◽  
Vol 831 ◽  
pp. 62-66
Author(s):  
Chen Si ◽  
Zhu Ge Yan ◽  
De Ping Xu

This paper presents a discussion of factors affecting the performance of fly ash based geopolymer, and some recent innovations on fly ash based geopolymer. The characteristics of fly ash based geopolymer are discussed in terms of the effects of raw material selection, alkaline activators, and curing procedures. Nowadays, researchers have used geopolymer as a cementitious material to develop innovative geopolymer materials, such as porous, fibre reinforced and foam fly ash based geopolymer concrete, which are greener than the traditional cementitious material. The high-calcium fly ashes could be used to produce porous fly ash based geopolymer composites with satisfactory mechanical properties. The addition of fibres increases greatly the ductility of geopolymer. Foam can be added to the geopolymeric mixture to produce lightweight concrete. However, the manufacturing of fly ash-based geopolymer foam concrete has not been explored too much.


Sign in / Sign up

Export Citation Format

Share Document