scholarly journals Effect of Soccer Ball Panels on Aerodynamic Characteristics and Flow in Drag Crisis

2020 ◽  
Vol 11 (1) ◽  
pp. 296
Author(s):  
Yuki Sakamoto ◽  
Masaki Hiratsuka ◽  
Shinichiro Ito
Keyword(s):  
Turbulent Flows ◽  
Critical Region ◽  
Aerodynamic Characteristics ◽  
Separation Point ◽  
World Cup ◽  
Cross Sectional ◽  
Soccer Ball ◽  
Piv Measurement ◽  
Image Velocimetry ◽  
Laminar And Turbulent Flows

The panel patterns of soccer balls that change with each World Cup have a significant impact on the balls’ aerodynamic and flight characteristics. In this study, the aerodynamic forces of eleven types of soccer ball with different panel patterns were measured in a wind tunnel experiment. We characterized the panel shapes of soccer balls by the length, cross-sectional area, and the panel grooves’ volume. The results confirmed that the drag and drag crisis characteristics are dependent on the groove length and volumes. Flow separation points were visualized by an oil film experiment and particle image velocimetry (PIV) measurement to understand the drag crisis of the soccer balls. The results showed that the panel shape of the ball significantly changes the position of the separation point near the critical region, where the drags crisis occurs. In the critical region, laminar and turbulent flows coexist on the ball. On the other hand, the effect of panel shape on the separation point position is small in subcritical and supercritical states.

A 3-D Thin Layer Navier-Stokes Code for Supersonic Laminar and Turbulent Flows

2002 ◽  
Author(s):  
Omid Abouali ◽  
Mohammad M. Alishahi ◽  
Homayoon Emdad ◽  
Goodarz Ahmadi
Keyword(s):  
Experimental Data ◽  
Shock Wave ◽  
Mach Number ◽  
Turbulent Flows ◽  
Turbulence Modeling ◽  
Cross Flow ◽  
Navier Stokes ◽  
Cross Sectional ◽  
Laminar And Turbulent Flows ◽  
Circumferential Pressure

A 3-D Thin Layer Navier-Stokes (TLNS) code for solving viscous supersonic flows is developed. The new code uses several numerical algorithms for space and time discretization together with appropriate turbulence modeling. Roe’s method is used for discretizing the convective terms and the central differencing scheme is employed for the viscous terms. An explicit time marching technique and a finite volume space discretization are used. The developed computational model can handle both laminar and turbulent flows. The Baldwin-Lomax model and Degani-Schiff modifications are used for turbulence modeling. The computational model is applied to a hypersonic laminar flow at Mach 7.95 around a cone at different incidence angles. The circumferential pressure distribution is compared with the experimental data. The cross-sectional Mach number contours are also presented. It is shown that in addition to the outer shock, a cross-flow shock wave is also present in the flow field. The cases of supersonic turbulent flows with Mach number 3 around a tangent-ogive with incidence angles of 6° and a secant-ogive with incidence angles of 10° are also studied. The circumferential pressure distributions are compared with the experimental data and the Euler code results and good agreement is obtained. The cross-sectional Mach number contours are also presented. It is shown that in this case also in addition to the outer shock, a cross-flow shock wave is also present at the incidence angle of 10°.

A numerical study on combined baffles quick-separation device

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ehsan Dehdarinejad ◽  
Morteza Bayareh ◽  
Mahmud Ashrafizaadeh
Keyword(s):  
Turbulent Flows ◽  
Separation Efficiency ◽  
Numerical Study ◽  
Turbulence Models ◽  
Complete Separation ◽  
Solid Particles ◽  
Flow Rates ◽  
Separation Device ◽  
Coupling Technique ◽  
Laminar And Turbulent Flows

Abstract The transfer of particles in laminar and turbulent flows has many applications in combustion systems, biological, environmental, nanotechnology. In the present study, a Combined Baffles Quick-Separation Device (CBQSD) is simulated numerically using the Eulerian-Lagrangian method and different turbulence models of RNG k-ε, k-ω, and RSM for 1–140 μm particles. A two-way coupling technique is employed to solve the particles’ flow. The effect of inlet flow velocity, the diameter of the splitter plane, and solid particles’ flow rate on the separation efficiency of the device is examined. The results demonstrate that the RSM turbulence model provides more appropriate results compared to RNG k-ε and k-ω models. Four thousand two hundred particles with the size distribution of 1–140 µm enter the device and 3820 particles are trapped and 380 particles leave the device. The efficiency for particles with a diameter greater than 28 µm is 100%. The complete separation of 22–28 μm particles occurs for flow rates of 10–23.5 g/s, respectively. The results reveal that the separation efficiency increases by increasing the inlet velocity, the device diameter, and the diameter of the particles.

Effects of Squish Flow on Tangential Flow and Turbulence in a Diesel Engine

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Yanzhe Sun ◽  
Kai Sun ◽  
Tianyou Wang ◽  
Yufeng Li ◽  
Zhen Lu
Keyword(s):  
Diesel Engine ◽  
Turbulent Flows ◽  
Large Scale ◽  
Radial Flow ◽  
Tangential Component ◽  
Tangential Flow ◽  
Image Velocimetry ◽  
Turbulence Production ◽  
Large Scale Flow ◽  
Main Effects

Emission and fuel consumption in swirl-supported diesel engines strongly depend on the in-cylinder turbulent flows. But the physical effects of squish flow on the tangential flow and turbulence production are still far from well understood. To identify the effects of squish flow, Particle image velocimetry (PIV) experiments are performed in a motored optical diesel engine equipped with different bowls. By comparing and associating the large-scale flow and turbulent kinetic energy (k), the main effects of the squish flow are clarified. The effect of squish flow on the turbulence production in the r−θ plane lies in the axial-asymmetry of the annular distribution of radial flow and the deviation between the ensemble-averaged swirl field and rigid body swirl field. Larger squish flow could promote the swirl center to move to the cylinder axis and reduce the deformation of swirl center, which could decrease the axial-asymmetry of annular distribution of radial flow, further, that results in a lower turbulence production of the shear stress. Moreover, larger squish flow increases the radial fluctuation velocity which makes a similar contribution to k with the tangential component. The understanding of the squish flow and its correlations with tangential flow and turbulence obtained in this study is beneficial to design and optimize the in-cylinder turbulent flow.

Application of the Method of Particle Image Velocimetry for Analyzing Turbulent Flows with a Periodic Component

2004 ◽  
Vol 47 (5) ◽  
pp. 703-710 ◽  
Author(s):  
S. V. Alekseenko ◽  
A. V. Bilsky ◽  
D. M. Markovich
Keyword(s):  
Particle Image Velocimetry ◽  
Turbulent Flows ◽  
Particle Image ◽  
Periodic Component ◽  
Image Velocimetry

The free recovery of wall-stabilised arcs with imposed laminar and turbulent flows

1980 ◽  
Vol 13 (4) ◽  
pp. 593-610 ◽  
Author(s):  
R J Hill ◽  
G R Jones
Keyword(s):  
Turbulent Flows ◽  
Laminar And Turbulent Flows

Experimental investigation on the momentumless wake using trailing edge blowing

2008 ◽  
Vol 222 (8) ◽  
pp. 1477-1486 ◽  
Author(s):  
Y Wu ◽  
X Zhu ◽  
Z Du
Keyword(s):  
Three Dimensional ◽  
Velocity Profiles ◽  
Axial Fan ◽  
Trailing Edge ◽  
Mean Velocity ◽  
Piv Measurement ◽  
Image Velocimetry ◽  
Velocity Spectra ◽  
Momentumless Wake ◽  
Wake Characteristics

A developed plate stator model with and without trailing edge blowing (TEB) is studied using experimental methods. Wake characteristics of flow over the stator in the three-dimensional wake regimes are studied using hot-wire anemometry (HWA) and particle image velocimetry (PIV) techniques. First, the mean velocity profiles have been measured in the wake of the stator using HWA. Four wake characteristics have been obtained through momentum thickness judgments: pure wake, weak wake, momentumless wake, and jet. These velocity profiles show some differences in momentum deficit for the four cases. Then, the velocity spectra of the pure wake and momentumless wake obtained through the HWA measurements showed that TEB can eliminate the shedding vortex of the stator. Characteristic length scales based on the wake turbulent intensity profiles showed that the momentumless wake can reduce the wake width and depth. PIV measurement is carried out to measure the flow field of the four wakes. Finally, the application of TEB approaching momentumless wake status is used on an industrial ventilation low-pressure axial fan to assess noise reduction. The results show that TEB can make the outlet of the stator uniform, reduce velocity fluctuation, destroy the vorticity structure downstream of the stator, and reduce interaction noise level of the stator and rotor.

Numerical analysis of the influence of the physical viscosity on the vortex heat transfer in laminar and turbulent flows around a heated plate with a shallow spherical hole

2009 ◽  
Vol 82 (5) ◽  
pp. 847-859 ◽  
Author(s):  
S. A. Isaev ◽  
S. Z. Sapozhnikov ◽  
V. Yu. Mityakov ◽  
A. V. Mityakov ◽  
S. A. Mozhaiskii ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Analysis ◽  
Turbulent Flows ◽  
Heated Plate ◽  
Laminar And Turbulent Flows
Sign in / Sign up

Export Citation Format

Share Document