scholarly journals Duty Cycle Control Method Considering Buffer Occupancy for IEEE 802.15.4-Compliant Heterogeneous Wireless Sensor Network

2021 ◽  
Vol 11 (4) ◽  
pp. 1362
Author(s):  
Kohei Tomita ◽  
Nobuyoshi Komuro
Keyword(s):  
Duty Cycle ◽  
Ieee 802.15.4 ◽  
Control Method ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Buffer Occupancy ◽  
Heterogeneous Wireless Sensor Networks ◽  
Heterogeneous Wireless Sensor Network ◽  
Analytical Expressions

This paper proposes a Duty-Cycle (DC) control method in order to improve the Packet Delivery Ratio (PDR) for IEEE 802.15.4-compliant heterogeneous Wireless Sensor Networks (WSNs). The proposed method controls the DC so that the buffer occupancy of sensor nodes is less than 1 and assigns DC to each sub-network (sub-network means a network consisting of a router node and its subordinate nodes). In order to use the appropriate DC of each sub-network to obtain the high PDR, this paper gives analytical expressions of the buffer occupancy. The simulation results show that the proposed method achieves a reasonable delay and energy consumption while maintaining high PDR.

Multicast Scaling in Heterogeneous Wireless Sensor Networks for Security and Time Efficiency

2021 ◽  
Author(s):  
Ramdas Vankdothu ◽  
Hameed Mohd Abdul ◽  
Fatima Husnah ◽  
Subbarao Akkala
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Network Performance ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Time Efficiency ◽  
Efficiency Measures ◽  
Heterogeneous Wireless Sensor Networks ◽  
Fuzzy C Means Clustering

Abstract Heterogeneous wireless sensor networks (HWSNs) satisfy researchers' requirements for developing real-world solutions that handle unattended challenges. However, the primary constraint of researchers is the privacy of the sensor nodes. It safeguards the sensor nodes and extensions in the HWSNs. Therefore, it is necessary to develop secure operational systems. Multicast scaling with security and time efficiency is described in heterogeneous wireless sensor networks to maximize network performance while also successfully protecting network privacy. This study evaluates the initial security and time efficiency measures, such as execution time, transmission delay, processing delay, congestion level, and trust measure. Subsequently, the optimal location of the heterogeneous nodes is determined using sigmoid-based fuzzy c-means clustering. Finally, successful cluster routing was achieved via support-value-based particle swarm optimization. The experimental results indicate that the proposed strategy surpasses existing strategies in terms of network delivery ratio, end-to-end delay, throughput, packet delivery, and node remaining energy level.

Performance Evaluation of Quality of Service in IEEE 802.15.4-Based Wireless Sensor Networks

2017 ◽  
pp. 213-248 ◽  
Author(s):  
Sanatan Mohanty ◽  
Sarat Kumar Patra
Keyword(s):  
Quality Of Service ◽  
Performance Evaluation ◽  
Ieee 802.15.4 ◽  
Resource Constraints ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Mesh Topology ◽  
Autonomous Sensor

Wireless Sensor Network (WSN) consists of many tiny, autonomous sensor nodes capable of sensing, computation and communication. The main objective of IEEE 802.15.4 based WSN standard is to provide low cost, low power and short range communication. Providing QoS in WSN is a challenging task due to its severe resource constraints in terms of energy, network bandwidth, memory, and CPU. In this chapter, Quality of Service (QoS) performance evaluation has been carried out for IEEE 802.15.4 networks based WSN star and mesh topology using routing protocols like AODV, DSR and DYMO in QualNet 4.5 simulator. Performance evaluations metrics like Packet Delivery Ratio (PDR), throughput, average end to end delay, energy per goodput bit, network lifetime of battery model and total energy consumption which includes transmission, reception, idle and sleep mode were considered for both the topology. From the simulation studies and analysis, it can be seen that on an average DSR and DYMO performs better than AODV for different traffic load rates.

Designing and Implementing a Lightweight WSN MAC Protocol for Smart Home Networking Applications

2016 ◽  
Vol 26 (03) ◽  
pp. 1750043 ◽  
Author(s):  
Ching-Han Chen ◽  
Ming-Yi Lin ◽  
Wen-Hung Lin
Keyword(s):  
Smart Home ◽  
Ieee 802.15.4 ◽  
Mac Protocol ◽  
Discrete Event ◽  
Packet Delivery Ratio ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Medium Access ◽  
Packet Delivery

Wireless sensor networks (WSNs) represent a promising solution in the fields of the Internet of Things (IoT) and machine-to-machine networks for smart home applications. However, to feasibly deploy wireless sensor devices in a smart home environment, four key requirements must be satisfied: stability, compatibility, reliability routing, and performance and power balance. In this study, we focus on the unreliability problem of the IEEE 802.15.4 WSN medium access control (MAC), which is caused by the contention-based MAC protocol used for channel access. This problem results in a low packet delivery ratio, particularly in a smart home network with only a few sensor nodes. In this paper, we first propose a lightweight WSN protocol for a smart home or an intelligent building, thus replacing the IEEE 802.15.4 protocol, which is highly complex and has a low packet delivery ratio. Subsequently, we describe the development of a discrete event system model for the WSN by using a GRAFCET and propose a development platform based on a reconfigurable FPGA for reducing fabrication cost and time. Finally, a prototype WSN controller ASIC chip without an extra CPU and with our proposed lightweight MAC was developed and tested. It enhanced the packet delivery ratio by up to 100%.

scholarly journals AN-Aided Secure Beamforming in Power-Splitting-Enabled SWIPT MIMO Heterogeneous Wireless Sensor Networks

Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 459 ◽  
Author(s):  
Weili Ge ◽  
Zhengyu Zhu ◽  
Wanming Hao ◽  
Yi Wang ◽  
Zhongyong Wang ◽  
...  
Keyword(s):  
Optimal Solution ◽  
Taylor Series Expansion ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Artificial Noise ◽  
Power Splitting ◽  
Green Communications ◽  
Convex Approximation ◽  
Heterogeneous Wireless Sensor Networks ◽  
Heterogeneous Wireless Sensor Network

In this paper, we investigate the physical layer security in a two-tier heterogeneous wireless sensor network (HWSN) depending on simultaneous wireless information and power transfer (SWIPT) approach for multiuser multiple-input multiple-output wiretap channels with artificial noise (AN) transmission, where a more general system framework of HWSN only includes a macrocell and a femtocell. For the sake of implementing security enhancement and green communications, the joint optimization problem of the secure beamforming vector at the macrocell and femtocell, the AN vector, and the power splitting ratio is modeled to maximize the minimal secrecy capacity of the wiretapped macrocell sensor nodes (M-SNs) while considering the fairness among multiple M-SNs. To reduce the performance loss of the rank relaxation from the SDR technique while solving the non-convex max–min program, we apply successive convex approximation (SCA) technique, first-order Taylor series expansion and sequential parametric convex approximation (SPCA) approach to transform the max–min program to a second order cone programming (SOCP) problem to iterate to a near-optimal solution. In addition, we propose a novel SCA-SPCA-based iterative algorithm while its convergence property is proved. The simulation shows that our SCA-SPCA-based method outperforms the conventional methods.

scholarly journals Performance of Non-Uniform Duty-Cycled ContikiMAC in Wireless Sensor Networks

2017 ◽  
Vol 7 (2) ◽  
pp. 942
Author(s):  
Nur Rabiul Liyana Mohamed ◽  
Ansar Jamil ◽  
Lukman Hanif Audah Audah ◽  
Jiwa Abdullah ◽  
Rozlan Alias
Keyword(s):  
Duty Cycle ◽  
Dynamic Network ◽  
Poor Performance ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Sleep Mode ◽  
Bursty Traffic ◽  
Delivery Ratio ◽  
Clear Channel Assessment ◽  
Clear Channel

<span lang="EN-GB">Wireless Sensor Network (WSN) is a promising technology in Internet of Things (IoTs) because it can be implemented in many applications. However, a main drawback of WSN is it has limited energy because each sensor node is powered using batteries. Therefore, duty-cycle mechanisms are introduced to reduce power consumption of the sensor nodes by ensuring the sensor nodes in the sleep mode almost of the time in order to prolong the network lifetime. One of the de-facto standard of duty-cycle mechanism in WSN is ContikiMAC, which is the default duty-cycle mechanism in Contiki OS. ContikiMAC ensures nodes can participate in network communication yet keep it in sleep mode for roughly 99\% of the time. However, it is found that the ContikiMAC does not perform well in dynamic network conditions. In a bursty network, ContikiMAC provides a poor performance in term of packet delivery ratio, which is caused by congestion. One possible solution is ContikiMAC should increase its duty-cycle rate in order to support the bursty traffic. This solution creates a non-uniform duty-cycle rates among the sensor nodes in the network. This work aims to investigate the effect of non-uniform duty-cycle rates on the performance on ContikiMAC. Cooja simulator is selected as the simulation tool. Three different simulation scenarios are considered depending on the Clear Channel Assessment Rate (CCR) configurations: a low uniform CCR value (Low-CCR), a high uniform CCR value (High-CCR) and non-uniform CCR values (Non-uniform-CCR). The simulation results show that the Low-CCR scenario provides the worst performance of PDR. On the other hand, the High-CCR scenario provides the best performance of PDR. The Non-uniform-CCR provides PDR in between of Low-CCR and High-CCR.</span>

scholarly journals An Empirical Evaluation of Lightweight Random Walk Based Routing Protocol in Duty Cycle Aware Wireless Sensor Networks

2014 ◽  
Vol 2014 ◽  
pp. 1-9
Author(s):  
Adnan Noor Mian ◽  
Mehwish Fatima ◽  
Raees Khan ◽  
Ravi Prakash
Keyword(s):  
Wireless Sensor Networks ◽  
Random Walk ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Duty Cycle ◽  
Ieee 802.15.4 ◽  
Empirical Evaluation ◽  
Dynamic Environment ◽  
Sensor Nodes ◽  
Wireless Sensor

Energy efficiency is an important design paradigm in Wireless Sensor Networks (WSNs) and its consumption in dynamic environment is even more critical. Duty cycling of sensor nodes is used to address the energy consumption problem. However, along with advantages, duty cycle aware networks introduce some complexities like synchronization and latency. Due to their inherent characteristics, many traditional routing protocols show low performance in densely deployed WSNs with duty cycle awareness, when sensor nodes are supposed to have high mobility. In this paper we first present a three messages exchange Lightweight Random Walk Routing (LRWR) protocol and then evaluate its performance in WSNs for routing low data rate packets. Through NS-2 based simulations, we examine the LRWR protocol by comparing it with DYMO, a widely used WSN protocol, in both static and dynamic environments with varying duty cycles, assuming the standard IEEE 802.15.4 in lower layers. Results for the three metrics, that is, reliability, end-to-end delay, and energy consumption, show that LRWR protocol outperforms DYMO in scalability, mobility, and robustness, showing this protocol as a suitable choice in low duty cycle and dense WSNs.

Performance Evaluation of Quality of Service in IEEE 802.15.4-Based Wireless Sensor Networks

2020 ◽  
pp. 644-678
Author(s):  
Sanatan Mohanty ◽  
Sarat Kumar Patra
Keyword(s):  
Quality Of Service ◽  
Performance Evaluation ◽  
Ieee 802.15.4 ◽  
Resource Constraints ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Mesh Topology ◽  
Autonomous Sensor

Wireless Sensor Network (WSN) consists of many tiny, autonomous sensor nodes capable of sensing, computation and communication. The main objective of IEEE 802.15.4 based WSN standard is to provide low cost, low power and short range communication. Providing QoS in WSN is a challenging task due to its severe resource constraints in terms of energy, network bandwidth, memory, and CPU. In this chapter, Quality of Service (QoS) performance evaluation has been carried out for IEEE 802.15.4 networks based WSN star and mesh topology using routing protocols like AODV, DSR and DYMO in QualNet 4.5 simulator. Performance evaluations metrics like Packet Delivery Ratio (PDR), throughput, average end to end delay, energy per goodput bit, network lifetime of battery model and total energy consumption which includes transmission, reception, idle and sleep mode were considered for both the topology. From the simulation studies and analysis, it can be seen that on an average DSR and DYMO performs better than AODV for different traffic load rates.

scholarly journals Securing Heterogeneous Wireless Sensor Networks: Breaking and Fixing a Three-Factor Authentication Protocol

Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3663 ◽  
Author(s):  
Seyed Aghili ◽  
Hamid Mala ◽  
Pedro Peris-Lopez
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Session Key ◽  
Heterogeneous Wireless Sensor Networks ◽  
Sensor Network Security ◽  
Wireless Sensor Network Security ◽  
Healthcare Monitoring ◽  
Three Factor

Heterogeneous wireless sensor networks (HWSNs) are employed in many real-time applications, such as Internet of sensors (IoS), Internet of vehicles (IoV), healthcare monitoring, and so on. As wireless sensor nodes have constrained computing, storage and communication capabilities, designing energy-efficient authentication protocols is a very important issue in wireless sensor network security. Recently, Amin et al. presented an untraceable and anonymous three-factor authentication (3FA) scheme for HWSNs and argued that their protocol is efficient and can withstand the common security threats in this sort of networks. In this article, we show how their protocol is not immune to user impersonation, de-synchronization and traceability attacks. In addition, an adversary can disclose session key under the typical assumption that sensors are not tamper-resistant. To overcome these drawbacks, we improve the Amin et al.’s protocol. First, we informally show that our improved scheme is secure against the most common attacks in HWSNs in which the attacks against Amin et al.’s protocol are part of them. Moreover, we verify formally our proposed protocol using the BAN logic. Compared with the Amin et al.’s scheme, the proposed protocol is both more efficient and more secure to be employed which renders the proposal suitable for HWSN networks.

Sign in / Sign up

Export Citation Format

Share Document