scholarly journals An Empirical Evaluation of Lightweight Random Walk Based Routing Protocol in Duty Cycle Aware Wireless Sensor Networks

2014 ◽  
Vol 2014 ◽  
pp. 1-9
Author(s):  
Adnan Noor Mian ◽  
Mehwish Fatima ◽  
Raees Khan ◽  
Ravi Prakash
Keyword(s):  
Wireless Sensor Networks ◽  
Random Walk ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Duty Cycle ◽  
Ieee 802.15.4 ◽  
Empirical Evaluation ◽  
Dynamic Environment ◽  
Sensor Nodes ◽  
Wireless Sensor

Energy efficiency is an important design paradigm in Wireless Sensor Networks (WSNs) and its consumption in dynamic environment is even more critical. Duty cycling of sensor nodes is used to address the energy consumption problem. However, along with advantages, duty cycle aware networks introduce some complexities like synchronization and latency. Due to their inherent characteristics, many traditional routing protocols show low performance in densely deployed WSNs with duty cycle awareness, when sensor nodes are supposed to have high mobility. In this paper we first present a three messages exchange Lightweight Random Walk Routing (LRWR) protocol and then evaluate its performance in WSNs for routing low data rate packets. Through NS-2 based simulations, we examine the LRWR protocol by comparing it with DYMO, a widely used WSN protocol, in both static and dynamic environments with varying duty cycles, assuming the standard IEEE 802.15.4 in lower layers. Results for the three metrics, that is, reliability, end-to-end delay, and energy consumption, show that LRWR protocol outperforms DYMO in scalability, mobility, and robustness, showing this protocol as a suitable choice in low duty cycle and dense WSNs.

Adaptive IEEE 802.15.4 MAC Protocol for Wireless Sensor Networks

2015 ◽  
pp. 109-123 ◽  
Author(s):  
Yousef S. Kavian ◽  
Hadi Rasouli
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Duty Cycle ◽  
Network Traffic ◽  
Ieee 802.15.4 ◽  
Extreme Environments ◽  
Wireless Sensor ◽  
Media Access ◽  
The Coordinator

The energy efficiency is a main challenging issue for employing wireless sensor networks (WSNs) in extreme environments where the media access progress consumes the main part of network energy. The IEEE 802.15.4 is adopted in low complexity, ultra-low power and low data rate wireless sensor applications where the energy consumption of nodes should be managed carefully in harsh and inaccessible environments. The beacon-enabled mode of the IEEE 802.15.4 provides a power management scheme. When the network traffic is variable, this mode does not work as well and the coordinator is not capable for estimating the network traffic and adjusting proper duty cycle dynamically. In this chapter an approach for estimating network traffic in star topology is proposed to overcome this issue where the coordinator could estimate the network traffic and dynamically adjusts duty cycle proportion to the variation of network traffic. The simulation results demonstrate the superiority of proposed approach for improving the energy consumption, throughput and delay in comparison with the IEEE 802.15.4 under different traffic conditions.

scholarly journals Modified Echo State Network Enabled Dynamic Duty Cycle for Optimal Opportunistic Routing in EH-WSNs

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 98
Author(s):  
Rajkumar Singh Rathore ◽  
Suman Sangwan ◽  
Kabita Adhikari ◽  
Rupak Kharel
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Energy Harvesting ◽  
Duty Cycle ◽  
Opportunistic Routing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Echo State Network ◽  
Proposed Model

Minimizing energy consumption is one of the major challenges in wireless sensor networks (WSNs) due to the limited size of batteries and the resource constrained tiny sensor nodes. Energy harvesting in wireless sensor networks (EH-WSNs) is one of the promising solutions to minimize the energy consumption in wireless sensor networks for prolonging the overall network lifetime. However, static energy harvesting in individual sensor nodes is normally limited and unbalanced among the network nodes. In this context, this paper proposes a modified echo state network (MESN) based dynamic duty cycle with optimal opportunistic routing (OOR) for EH-WSNs. The proposed model is used to act as a predictor for finding the expected energy consumption of the next slot in dynamic duty cycle. The model has adapted a whale optimization algorithm (WOA) for optimally selecting the weights of the neurons in the reservoir layer of the echo state network towards minimizing energy consumption at each node as well as at the network level. The adapted WOA enabled energy harvesting model provides stable output from the MESN relying on optimal weight selection in the reservoir layer. The dynamic duty cycle is updated based on energy consumption and optimal threshold energy for transmission and reception at bit level. The proposed OOR scheme uses multiple energy centric parameters for selecting the relay set oriented forwarding paths for each neighbor nodes. The performance analysis of the proposed model in realistic environments attests the benefits in terms of energy centric metrics such as energy consumption, network lifetime, delay, packet delivery ratio and throughput as compared to the state-of-the-art-techniques.

Energy Efficient Group Based Linear Wireless Sensor Networks for Application in Pipeline Monitoring

2020 ◽  
Vol 10 ◽  
Author(s):  
Chinedu Duru ◽  
Neco Ventura ◽  
Mqhele Dlodlo
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Remote Monitoring ◽  
Linear Array ◽  
Minimum Energy ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Sink Node ◽  
Pipeline Monitoring

Background: Wireless Sensor Networks (WSNs) have been researched to be one of the ground-breaking technologies for the remote monitoring of pipeline infrastructure of the Oil and Gas industry. Research have also shown that the preferred deployment approach of the sensor network on pipeline structures follows a linear array of nodes, placed a distance apart from each other across the infrastructure length. The linear array topology of the sensor nodes gives rise to the name Linear Wireless Sensor Networks (LWSNs) which over the years have seen themselves being applied to pipelines for effective remote monitoring and surveillance. This paper aims to investigate the energy consumption issue associated with LWSNs deployed in cluster-based fashion along a pipeline infrastructure. Methods: Through quantitative analysis, the study attempts to approach the investigation conceptually focusing on mathematical analysis of proposed models to bring about conjectures on energy consumption performance. Results: From the derived analysis, results have shown that energy consumption is diminished to a minimum if there is a sink for every placed sensor node in the LWSN. To be precise, the analysis conceptually demonstrate that groups containing small number of nodes with a corresponding sink node is the approach to follow when pursuing a cluster-based LWSN for pipeline monitoring applications. Conclusion: From the results, it is discovered that energy consumption of a deployed LWSN can be decreased by creating groups out of the total deployed nodes with a sink servicing each group. In essence, the smaller number of nodes each group contains with a corresponding sink, the less energy consumed in total for the entire LWSN. This therefore means that a sink for every individual node will attribute to minimum energy consumption for every non-sink node. From the study, it can be concurred that energy consumption of a LWSN is inversely proportional to the number of sinks deployed and hence the number of groups created.

Improved DV-Hop Localization Scheme for Randomly Deployed WSNs

2020 ◽  
Vol 10 (1) ◽  
pp. 94-109 ◽  
Author(s):  
Rekha Goyat ◽  
Mritunjay Kumar Rai ◽  
Gulshan Kumar ◽  
Hye-Jin Kim ◽  
Se-Jung Lim
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Research Area ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Localization Error ◽  
Anchor Nodes ◽  
Least Energy ◽  
Range Free

Background: Wireless Sensor Networks (WSNs) is considered one of the key research area in the recent. Various applications of WSNs need geographic location of the sensor nodes. Objective: Localization in WSNs plays an important role because without knowledge of sensor nodes location the information is useless. Finding the accurate location is very crucial in Wireless Sensor Networks. The efficiency of any localization approach is decided on the basis of accuracy and localization error. In range-free localization approaches, the location of unknown nodes are computed by collecting the information such as minimum hop count, hop size information from neighbors nodes. Methods: Although various studied have been done for computing the location of nodes but still, it is an enduring research area. To mitigate the problems of existing algorithms, a range-free Improved Weighted Novel DV-Hop localization algorithm is proposed. Main motive of the proposed study is to reduced localization error with least energy consumption. Firstly, the location information of anchor nodes is broadcasted upto M hop to decrease the energy consumption. Further, a weight factor and correction factor are introduced which refine the hop size of anchor nodes. Results: The refined hop size is further utilized for localization to reduces localization error significantly. The simulation results of the proposed algorithm are compared with other existing algorithms for evaluating the effectiveness and the performance. The simulated results are evaluated in terms localization error and computational cost by considering different parameters such as node density, percentage of anchor nodes, transmission range, effect of sensing field and effect of M on localization error. Further statistical analysis is performed on simulated results to prove the validation of proposed algorithm. A paired T-test is applied on localization error and localization time. The results of T-test depicts that the proposed algorithm significantly improves the localization accuracy with least energy consumption as compared to other existing algorithms like DV-Hop, IWCDV-Hop, and IDV-Hop. Conclusion: From the simulated results, it is concluded that the proposed algorithm offers 36% accurate localization than traditional DV-Hop and 21 % than IDV-Hop and 13% than IWCDV-Hop.

scholarly journals Calculating the Number of Cluster Heads Based on the Rate-Distortion Function in Wireless Sensor Networks

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Mingxin Yang ◽  
Jingsha He ◽  
Yuqiang Zhang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Fusion ◽  
Rate Distortion ◽  
Distortion Function ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Cluster Heads

Due to limited resources in wireless sensor nodes, energy efficiency is considered as one of the primary constraints in the design of the topology of wireless sensor networks (WSNs). Since data that are collected by wireless sensor nodes exhibit the characteristics of temporal association, data fusion has also become a very important means of reducing network traffic as well as eliminating data redundancy as far as data transmission is concerned. Another reason for data fusion is that, in many applications, only some of the data that are collected can meet the requirements of the sink node. In this paper, we propose a method to calculate the number of cluster heads or data aggregators during data fusion based on the rate-distortion function. In our discussion, we will first establish an energy consumption model and then describe a method for calculating the number of cluster heads from the point of view of reducing energy consumption. We will also show through theoretical analysis and experimentation that the network topology design based on the rate-distortion function is indeed more energy-efficient.

scholarly journals Energy Consumption Based Low Energy Aware Gateway (LEAG) Protocol in Wireless Sensor Networks

2019 ◽  
Vol 8 (5S3) ◽  
pp. 128-132 ◽  
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Cluster Head ◽  
Base Station ◽  
Low Energy ◽  
Secure Routing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Energy Aware

Wireless Sensor Networks (WSN) consists of a large amount of nodes connected in a self-directed manner. The most important problems in WSN are Energy, Routing, Security, etc., price of the sensor nodes and renovation of these networks is reasonable. The sensor node tools included a radio transceiver with an antenna and an energy source, usually a battery. WSN compute the environmental conditions such as temperature, sound, pollution levels, etc., WSN built the network with the help of nodes. A sensor community consists of many detection stations known as sensor nodes, every of which is small, light-weight and portable. Nodes are linked separately. Each node is linked into the sensors. In recent years WSN has grow to be an essential function in real world. The data’s are sent from end to end multiple nodes and gateways, the data’s are connected to other networks such as wireless Ethernet. MGEAR is the existing mechanism. It works with the routing and energy consumption. The principal problem of this work is choosing cluster head, and the selection is based on base station, so the manner is consumes energy. In this paper, develop the novel based hybrid protocol Low Energy Aware Gateway (LEAG). We used Zigbee techniques to reduce energy consumption and routing. Gateway is used to minimize the energy consumption and data is send to the base station. Nodes are used to transmit the data into the cluster head, it transmit the data into gateway and gateway compress and aggregate the data then sent to the base station. Simulation result shows our proposed mechanism consumes less energy, increased throughput, packet delivery ration and secure routing when compared to existing mechanism (MGEAR).

scholarly journals Energy-efficient hierarchical routing in wireless sensor networks based on Fog Computing

2020 ◽  
Author(s):  
Ademola Abidoye ◽  
Boniface Kabaso
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Protocol ◽  
Data Transmission ◽  
Energy Efficient ◽  
Fog Computing ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Hierarchical Routing

Abstract Wireless sensor networks (WSNs) have been recognized as one of the most essential technologies of the 21st century. The applications of WSNs are rapidly increasing in almost every sector because they can be deployed in areas where cable and power supply are difficult to use. In the literature, different methods have been proposed to minimize energy consumption of sensor nodes so as to prolong WSNs utilization. In this article, we propose an efficient routing protocol for data transmission in WSNs; it is called Energy-Efficient Hierarchical routing protocol for wireless sensor networks based on Fog Computing (EEHFC). Fog computing is integrated into the proposed scheme due to its capability to optimize the limited power source of WSNs and its ability to scale up to the requirements of the Internet of Things applications. In addition, we propose an improved ant colony optimization (ACO) algorithm that can be used to construct optimal path for efficient data transmission for sensor nodes. The performance of the proposed scheme is evaluated in comparison with P-SEP, EDCF, and RABACO schemes. The results of the simulations show that the proposed approach can minimize sensor nodes’ energy consumption, data packet losses and extends the network lifetime

Efficient Energy Conservation and Faulty Node Detection on Machine Learning-Based Wireless Sensor Networks

2021 ◽  
Vol 13 (2) ◽  
pp. 1-20
Author(s):  
Amarasimha T. ◽  
V. Srinivasa Rao
Keyword(s):  
Machine Learning ◽  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Communication ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Support Vector ◽  
Faulty Node

Wireless sensor networks are used in machine learning for data communication and classification. Sensor nodes in network suffer from low battery power, so it is necessary to reduce energy consumption. One way of decreasing energy utilization is reducing the information transmitted by an advanced machine learning process called support vector machine. Further, nodes in WSN malfunction upon the occurrence of malicious activities. To overcome these issues, energy conserving and faulty node detection WSN is proposed. SVM optimizes data to be transmitted via one-hop transmission. It sends only the extreme points of data instead of transmitting whole information. This will reduce transmitting energy and accumulate excess energy for future purpose. Moreover, malfunction nodes are identified to overcome difficulties on data processing. Since each node transmits data to nearby nodes, the misbehaving nodes are detected based on transmission speed. The experimental results show that proposed algorithm provides better results in terms of reduced energy consumption and faulty node detection.

Sign in / Sign up

Export Citation Format

Share Document