scholarly journals Zero-Energy Building Integrated Planning Methodology for Office Building Considering Passive and Active Environmental Control Method

2021 ◽  
Vol 11 (8) ◽  
pp. 3686
Author(s):  
Soonmyung Lee ◽  
Sanghoon Park
Keyword(s):  
Energy Consumption ◽  
Energy Production ◽  
Design Methodology ◽  
Transmission Rate ◽  
Heat Transmission ◽  
Zero Energy ◽  
Solar Power Generation ◽  
Zero Energy Building ◽  
Production And Consumption ◽  
Final Energy Consumption

The objective of this study is to derive a design methodology for a zero-energy building considering the energy production and consumption of the building. In order to establish the design methodology, various factors affecting the energy production and consumption of the building are derived, and the effect of the heat transmission rate, the surface to volume ratio (S/V ratio), the location and the orientation of the building are analyzed by simulation method. As a result, the S/V ratio and the heat transmission rate are the most important factors in the central region of Korea where consumes large amounts of heating and cooling energy. This is because the final energy consumption varies depending on the heat loss through the envelope. It was confirmed that solar power generation is the most important factor in the southern regions of Korea where the energy consumption is relatively small. The final energy consumption varies depending on the solar power generation in these areas. Therefore, when designing a zero-energy building, the zero-energy of the building can be achieved by using the design methodology established in this study.

scholarly journals Optimization of Performance Parameter Design and Energy Use Prediction for Nearly Zero Energy Buildings

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3252 ◽  
Author(s):  
Xiaolong Xu ◽  
Guohui Feng ◽  
Dandan Chi ◽  
Ming Liu ◽  
Baoyue Dou
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Energy Demand ◽  
Maximum Relative Error ◽  
Performance Parameters ◽  
Zero Energy ◽  
Saving Ratio ◽  
Zero Energy Building ◽  
Artificial Neural ◽  
Zero Energy Buildings

Optimizing key parameters with energy consumption as the control target can minimize the heating and cooling needs of buildings. In this paper we focus on the optimization of performance parameters design and the prediction of energy consumption for nearly Zero Energy Buildings (nZEB). The optimal combination of various performance parameters and the Energy Saving Ratio (ESR)are studied by using a large volume of simulation data. Artificial neural networks (ANNs) are applied for the prediction of annual electrical energy consumption in a nearly Zero Energy Building designs located in Shenyang (China). The data of the energy demand for our test is obtained by using building simulation techniques. The results demonstrate that the heating energy demand for our test nearly Zero Energy Building is 17.42 KW·h/(m2·a). The Energy Saving Ratio of window-to-wall ratios optimization is the most obvious, followed by thermal performance parameters of the window, and finally the insulation thickness. The maximum relative error of building energy consumption prediction is 6.46% when using the artificial neural network model to predict energy consumption. The establishment of this prediction method enables architects to easily and accurately obtain the energy consumption of buildings during the design phase.

scholarly journals Capabilities of Nearly Zero Energy Building (nZEB) Electricity Generation to Charge Electric Vehicle (EV) Operating in Real Driving Conditions (RDC)

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7591
Author(s):  
Wojciech Cieslik ◽  
Filip Szwajca ◽  
Jedrzej Zawartowski ◽  
Katarzyna Pietrzak ◽  
Slawomir Rosolski ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Renewable Energy Sources ◽  
Energy Transition ◽  
Target Range ◽  
Zero Energy ◽  
Zero Energy Building ◽  
Driving Conditions ◽  
Almost All

The growing number of electric vehicles in recent years is observable in almost all countries. The country’s energy transition should accompany this rise in electromobility if it is currently generated from non-renewable sources. Only electric vehicles powered by renewable energy sources can be considered zero-emission. Therefore, it is essential to conduct interdisciplinary research on the feasibility of combining energy recovery/generation structures and testing the energy consumption of electric vehicles under real driving conditions. This work presents a comprehensive approach for evaluating the energy consumption of a modern public building–electric vehicle system within a specific location. The original methodology developed includes surveys that demonstrate the required mobility range to be provided to occupants of the building under consideration. In the next step, an energy balance was performed for a novel near-zero energy building equipped with a 199.8 kWp photovoltaic installation, the energy from which can be used to charge an electric vehicle. The analysis considered the variation in vehicle energy consumption by season (winter/summer), the actual charging profile of the vehicle, and the parking periods required to achieve the target range for the user.

scholarly journals Evaluation of Primary Energy from Photovoltaics for a Nearly Zero Energy Building (nZEB): A Case Study in Lithuania

Proceedings ◽  
2020 ◽  
Vol 51 (1) ◽  
pp. 5
Author(s):  
Rokas Tamašauskas ◽  
Jolanta Šadauskienė ◽  
Dorota Anna Krawczyk ◽  
Violeta Medelienė
Keyword(s):  
Energy Consumption ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Renewable Energy Resources ◽  
Zero Energy ◽  
Energy Factor ◽  
Average Value ◽  
Pv Systems ◽  
Zero Energy Building ◽  
The Difference

The European Commission has set the target in the Energy Efficiency Directive (EED) to reduce EU primary energy consumption in 2020 by 20%. A crucial aspect of the overall assessment of energy saving measures that affect electricity demand is the primary energy factor that is used for evaluation of primary energy consumption from renewable energy resources in a Nearly Zero Energy Building (nZEB). The analysis of the resources has revealed that energy from photovoltaics is evaluated using different methods. Therefore, this article’s aim is to investigate and evaluate the primary energy factor of energy from photovoltaics using the data of produced and consumed energy of 30 photovoltaic (PV) systems operating in Lithuania. Investigation results show that the difference of non-renewable primary energy factor between the PV systems due to capacities is 35%. In addition, the results of the studies show that the average value of the primary energy factor of PV systems in Lithuania is 1.038.

Research on the Design and Construction of Zero-Energy Building

2014 ◽  
Vol 587-589 ◽  
pp. 224-227
Author(s):  
Zhi Jun Zhang
Keyword(s):  
Energy Consumption ◽  
Carbon Emissions ◽  
Fossil Fuels ◽  
Developed Countries ◽  
Net Energy ◽  
Zero Energy ◽  
Zero Energy Building ◽  
Net Zero ◽  
Zero Net Energy ◽  
Zero Energy Buildings

A zero-energy building, also known as a zero net energy (ZNE) building, net-zero energy building (NZEB), or net zero building, is a building with zero net energy consumption and zero carbon emissions annually. Buildings that produce a surplus of energy over the year may be called “energy-plus buildings” and buildings that consume slightly more energy than they produce are called “near-zero energy buildings” or “ultra-low energy houses”. Traditional buildings consume 40% of the total fossil fuel energy in the US and European Union and are significant contributors of greenhouse gases. The zero net energy consumption principle is viewed as a means to reduce carbon emissions and reduce dependence on fossil fuels and although zero energy buildings remain uncommon even in developed countries, they are gaining importance and popularity.

Analysis of Energy Consumption in Building with NZEB Concept

2016 ◽  
Vol 824 ◽  
pp. 347-354 ◽  
Author(s):  
Rastislav Ingeli ◽  
Miroslav Čekon
Keyword(s):  
Energy Consumption ◽  
Energy Demand ◽  
Thermal Protection ◽  
Residential Buildings ◽  
Minimum Cost ◽  
Energy Prices ◽  
Zero Energy ◽  
Alternative Source ◽  
Zero Energy Building ◽  
Alternative Sources

The trend in the components of residential buildings is low energy demand buildings in relation to the minimum costs spent by users for their operation. The main aim of their construction is to improve the energy economy of buildings, to reduce the environmental load in energy consumption, to improve the quality of the interior, to ensure the minimum cost level in the operation of buildings and their maintenance in the life cycle. The consequence of increased energy prices and the possible implementation of tax policies in the countries of Europe is more frequently designing and implementing energy self-contained buildings. This means that energy necessary for the general use of a building can be produced in it to certain extent. The concept of such buildings is not only in high quality heat insulating properties, but also in suitable installed devices utilizing alternative sources. The objective indicator of saving and proof of the required level of a building is an analysis of its real energy consumption. The paper analyzes the energy consumption in a specific house which, in the design phase, met the criteria for designing a nearly zero energy building. The analyzed building has a high thermal protection and uses photovoltaic energy as an alternative source. The main aim is to evaluate the concept of the designed nearly zero energy building and to assess it in relation to the really consumed energy.

Sign in / Sign up

Export Citation Format

Share Document