scholarly journals The Influence of Process Parameters on the Surface Roughness of a 3D-Printed Co–Cr Dental Alloy Produced via Selective Laser Melting

2016 ◽  
Vol 6 (12) ◽  
pp. 401 ◽  
Author(s):  
Min-Ho Hong ◽  
Bong Min ◽  
Tae-Yub Kwon
Keyword(s):  
Surface Roughness ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Dental Alloy ◽  
Laser Melting ◽  
Influence Of Process Parameters ◽  
3D Printed

scholarly journals Surface Quality Research for Selective Laser Melting of Ti-6Al-4V Alloy

2016 ◽  
Vol 61 (3) ◽  
pp. 1291-1296 ◽  
Author(s):  
M. Król ◽  
T. Tański
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Surface Quality ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Scanning Speed ◽  
Innovative Technology ◽  
Metal Powders ◽  
Laser Melting ◽  
Influence Of Process Parameters

Abstract One of the innovative technology of producing the components is Selective Laser Melting (SLM) belongs to additive manufacturing techniques. SLM technology has already been successfully applied in the automotive, aerospace and medical industries. Despite progress in material flexibility and mechanical performances, relatively poor surface finish still presents a significant weakness in the SLM process. The scope of the present article is the study the influence of selective laser melting parameters such as laser power, scanning speed, exposure time and hatch spacing through additive manufacturing as well as the orientation of the model corresponding to the laser beam on the surface characteristic of the components made from Ti-6Al-4V alloy. By using optimized process parameters, a low surface roughness can be obtained. In research, the machine for the selective laser melting of metal powders Renishaw AM 125 device was used. Based on experiment plan, 32 models were produced, which were examined to define the surface roughness and thus represent an influence of process parameters and the orientation on the model surface quality. The article discusses the fundamental factors determining the roughness that gives invaluable knowledge to improve the surface quality of SLM parts.

scholarly journals The Influence of Process Parameters and Scanning Strategy on Lower Surface Quality of TA15 Parts Fabricated by Selective Laser Melting

Metals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1228
Author(s):  
Junjie Jiang ◽  
Jianming Chen ◽  
Zhihao Ren ◽  
Zhongfa Mao ◽  
Xiangyu Ma ◽  
...  
Keyword(s):  
Surface Quality ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Flexible Manufacturing ◽  
Molten Pool ◽  
Lower Surface ◽  
Laser Melting ◽  
Scanning Strategy ◽  
Influence Of Process Parameters

With superior flexible manufacturing capability, selective laser melting (SLM) has attracted more and more attention in the aerospace, medical, and automotive industries. However, the poor quality of the lower surface in overhanging structures is still one of the factors that limits the wide application of SLM. In this work, the influence of process parameters and scanning strategy on the lower surface quality of SLMed TA15 (Ti-6Al-2Zr-1Mo-1V) titanium alloy parts were studied. The results showed that the laser surface energy density (EF) had a significant influence on the quality of the lower surface. Excessive EF led to obvious sinking of the molten pool and a serious slag hanging phenomenon. However, the too low EF easily contributed to the insufficient powder fusion in the lower surface area, which led to the agglomeration of a molten pool during core processing, resulting in slag hanging, pores, and powder spalling that reduced the quality of the lower surface. Moreover, the cross-remelting strategy and non-remelting strategy gained better surface quality at the low EF and high EF, respectively. In addition, it was found that the quality of the lower surface could be quickly and accurately evaluated by the cooling time of the molten pool during the processing of the lower surface. This research can increase the understanding of the forming mechanism of the lower surface and has certain guiding significance for the process optimization of the lower surface.

Effects of Process Parameters on the Surface Roughness of Stainless Steel 316L Parts Produced by Selective Laser Melting

2018 ◽  
Vol 46 (4) ◽  
pp. 20170140 ◽  
Author(s):  
Derahman Nur Aqilah ◽  
Ab Karim Mohd Sayuti ◽  
Yusof Farazila ◽  
Dambatta Yusuf Suleiman ◽  
Mohd Amran Nor Amirah ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Stainless Steel 316L ◽  
Laser Melting

Adjustment of the scan track spacing and linear input energy to fabricate dense, pseudoelastic Nitinol shape memory alloy parts by selective laser melting

2021 ◽  
pp. 1045389X2110639
Author(s):  
Mohammadreza Zamani ◽  
Mahmoud Kadkhodaei ◽  
Mohsen Badrossamay ◽  
Ehsan Foroozmehr
Keyword(s):  
Shape Memory Alloy ◽  
Shape Memory ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Room Temperature ◽  
Optimal Parameters ◽  
Research Groups ◽  
Laser Melting ◽  
Influence Of Process Parameters ◽  
Transformation Temperatures

Nitinol is a well-known shape memory alloy (SMA) which is widely used due to its unique properties such as shape memory effect and pseudoelasticity. However, challenges fabricating Nitinol parts have limited the use of this alloy. Nowadays, additive manufacturing methods, specifically selective laser melting (SLM), are being used as an alternative to conventional methods for fabricating Nitinol specimens. Achieving a dense structure and controlling the transformation temperatures in such products have been among the most important challenges for several research groups. In the present study, fabrication of dense Nitinol parts by SLM together with control of their transformation temperatures is investigated with the main purpose of achieving pseudoelastic products at room temperature. For this purpose, the effect of process parameters on density, transformation temperatures, microstructure, hardness, and shape memory response are studied. The influence of process parameters on transformation temperatures varies depending on the amount of power so that the effect of scan tracks spacing for high powers is more pronounced than that for low powers. The hardness and compressive strength of the parts are also affected by the process parameters. Accordingly, optimal parameters are found to fabricate dense pseudoelastic parts with the ability of strain recovery at ambient temperature.

Selective Laser Melting of the Inconel 718 Nickel Superalloy

2014 ◽  
Vol 698 ◽  
pp. 333-338 ◽  
Author(s):  
Vadim Sh. Sufiiarov ◽  
Evgenii V. Borisov ◽  
Igor A. Polozov
Keyword(s):  
Selective Laser Melting ◽  
Process Parameters ◽  
Inconel 718 ◽  
Melting Process ◽  
Nickel Superalloy ◽  
Mechanical Tests ◽  
Laser Melting ◽  
Influence Of Process Parameters ◽  
Inconel 718 Superalloy

The results of the research on selective laser melting process of the Inconel 718 superalloy powder under conditions of additive manufacturing of parts for special purposes are presented. The influence of process parameters on the quality of manufactured parts is shown. Process parameters which allow manufacturing parts with the density close to 100%, are determined. Also, the results of mechanical tests and investigation of microstructure are presented.

scholarly journals Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting

2019 ◽  
Vol 9 (6) ◽  
pp. 1256 ◽  
Author(s):  
Amal Charles ◽  
Ahmed Elkaseer ◽  
Lore Thijs ◽  
Veit Hagenmeyer ◽  
Steffen Scholz
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Process Models ◽  
Average Error ◽  
Lead Times ◽  
Laser Melting ◽  
Optimization Of Process Parameters ◽  
The Difference

Additive manufacturing provides a number of benefits in terms of infinite freedom to design complex parts and reduced lead-times while globally reducing the size of supply chains as it brings all production processes under one roof. However, additive manufacturing (AM) lags far behind conventional manufacturing in terms of surface quality. This proves a hindrance for many companies considering investment in AM. The aim of this work is to investigate the effect of varying process parameters on the resultant roughness of the down-facing surfaces in selective laser melting (SLM). A systematic experimental study was carried out and the effects of the interaction of the different parameters and their effect on the surface roughness (Sa) were analyzed. It was found that the interaction and interdependency between parameters were of greatest significance to the obtainable surface roughness, though their effects vary greatly depending on the applied levels. This behavior was mainly attributed to the difference in energy absorbed by the powder. Predictive process models for optimization of process parameters for minimizing the obtained Sa in 45° and 35° down-facing surface, individually, were achieved with average error percentages of 5% and 6.3%, respectively, however further investigation is still warranted.

Sign in / Sign up

Export Citation Format

Share Document