scholarly journals A Novel Remote Sensing Index for Extracting Impervious Surface Distribution from Landsat 8 OLI Imagery

2019 ◽  
Vol 9 (13) ◽  
pp. 2631 ◽  
Author(s):  
Hong Fang ◽  
Yuchun Wei ◽  
Qiuping Dai
Keyword(s):  
Remote Sensing ◽  
Urban Areas ◽  
Impervious Surface ◽  
Landsat 8 ◽  
The Novel ◽  
Impervious Surfaces ◽  
Surface Distribution ◽  
Remote Sensing Imagery ◽  
Normalised Difference Vegetation Index ◽  
Multispectral Remote Sensing

The area of urban impervious surfaces is one of the most important indicators for determining the level of urbanisation and the quality of the environment and is rapidly increasing with the acceleration of urbanisation in developing countries. This paper proposes a novel remote sensing index based on the coastal band and normalised difference vegetation index for extracting impervious surface distribution from Landsat 8 multispectral remote sensing imagery. The index was validated using three images covering urban areas of China and was compared with five other typical index methods for the extraction of impervious surface distribution, namely, the normalised difference built-up index, index-based built-up index, normalised difference impervious surface index, normalised difference impervious index, and combinational built-up index. The results showed that the novel index provided higher accuracy and effectively distinguished impervious surfaces from bare soil, and the average values of the recall, precision, and F1 score for the three images were 95%, 91%, and 93%, respectively. The novel index provides better applicability in the extraction of urban impervious surface distribution from Landsat 8 multispectral remote sensing imagery.

scholarly journals A Comparative Study of various Indices for extraction urban impervious surface of Landsat 8 OLI

2019 ◽  
Vol 33 (2) ◽  
pp. 162-172
Author(s):  
Iswari Nur Hidayati ◽  
R Suharyadi
Keyword(s):  
Land Use ◽  
Urban Areas ◽  
Spectral Characteristics ◽  
Impervious Surface ◽  
Urban Heat Islands ◽  
Landsat 8 ◽  
Impervious Surfaces ◽  
Landsat 8 Oli ◽  
Heat Islands ◽  
Urban Heat

Impervious surface is one of the major land cover types of urban and suburban environment. Conversion of rural landscapes and vegetation area to urban and suburban land use is directly related to the increase of the impervious surface area. The impervious surface expansion is straight-lined with decreasing green spaces in urban areas. Impervious surface is one of indicator for detecting urban heat islands. This study compares various indices for mapping impervious surfaces using Landsat 8 OLI imagery by optimizing the different spectral characteristics of Landsat 8 OLI imagery. The research objectives are (1) to apply various indices for impervious surface mapping and (2) identifies impervious surfaces in urban areas based on multiple indices and provide recommendations and find the best index for mapping impervious surface in urban areas. In addition to utilizing the index, land use supervised classification method, maximum likelihood classification used for extracting built-up, and non-built-up areas. Accuracy assessment of this research used field data collection as primary data for calculating kappa coefficient, producer accuracy, and user accuracy. The study can also be extended to find the land surface temperature and correlate the impervious surface extraction data with urban heat islands.

scholarly journals Development of a global 30 m impervious surface map using multisource and multitemporal remote sensing datasets with the Google Earth Engine platform

2020 ◽  
Vol 12 (3) ◽  
pp. 1625-1648 ◽  
Author(s):  
Xiao Zhang ◽  
Liangyun Liu ◽  
Changshan Wu ◽  
Xidong Chen ◽  
Yuan Gao ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Random Forest ◽  
Human Activity ◽  
Impervious Surface ◽  
Google Earth ◽  
Landsat 8 ◽  
Impervious Surfaces ◽  
Sar Images ◽  
Training Samples ◽  
Google Earth Engine

Abstract. The amount of impervious surface is an important indicator in the monitoring of the intensity of human activity and environmental change. The use of remote sensing techniques is the only means of accurately carrying out global mapping of impervious surfaces covering large areas. Optical imagery can capture surface reflectance characteristics, while synthetic-aperture radar (SAR) images can be used to provide information on the structure and dielectric properties of surface materials. In addition, nighttime light (NTL) imagery can detect the intensity of human activity and thus provide important a priori probabilities of the occurrence of impervious surfaces. In this study, we aimed to generate an accurate global impervious surface map at a resolution of 30 m for 2015 by combining Landsat 8 Operational Land Image (OLI) optical images, Sentinel-1 SAR images and Visible Infrared Imaging Radiometer Suite (VIIRS) NTL images based on the Google Earth Engine (GEE) platform. First, the global impervious and nonimpervious training samples were automatically derived by combining the GlobeLand30 land-cover product with VIIRS NTL and MODIS enhanced vegetation index (EVI) imagery. Then, the local adaptive random forest classifiers, allowing for a regional adjustment of the classification parameters to take into account the regional characteristics, were trained and used to generate regional impervious surface maps for each 5∘×5∘ geographical grid using local training samples and multisource and multitemporal imagery. Finally, a global impervious surface map, produced by mosaicking numerous 5∘×5∘ regional maps, was validated by interpretation samples and then compared with five existing impervious products (GlobeLand30, FROM-GLC, NUACI, HBASE and GHSL). The results indicated that the global impervious surface map produced using the proposed multisource, multitemporal random forest classification (MSMT_RF) method was the most accurate of the maps, having an overall accuracy of 95.1 % and kappa coefficient (one of the most commonly used statistics to test interrater reliability; Olofsson et al., 2014) of 0.898 as against 85.6 % and 0.695 for NUACI, 89.6 % and 0.780 for FROM-GLC, 90.3 % and 0.794 for GHSL, 88.4 % and 0.753 for GlobeLand30, and 88.0 % and 0.745 for HBASE using all 15 regional validation data. Therefore, it is concluded that a global 30 m impervious surface map can accurately and efficiently be generated by the proposed MSMT_RF method based on the GEE platform. The global impervious surface map generated in this paper is available at https://doi.org/10.5281/zenodo.3505079 (Zhang and Liu, 2019).

scholarly journals Spatiotemporal Continuous Impervious Surface Mapping by Fusion of Landsat Time Series Data and Google Earth Imagery

2021 ◽  
Vol 13 (12) ◽  
pp. 2409
Author(s):  
Rui Chen ◽  
Xiaodong Li ◽  
Yihang Zhang ◽  
Pu Zhou ◽  
Yalan Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Urban Areas ◽  
Impervious Surface ◽  
Google Earth ◽  
Temporal Consistency ◽  
Impervious Surfaces ◽  
Consistency Check ◽  
Surface Mapping ◽  
Fraction Images

The monitoring of impervious surfaces in urban areas using remote sensing with fine spatial and temporal resolutions is crucial for monitoring urban development and environmental changes in urban areas. Spatiotemporal super-resolution mapping (STSRM) fuses fine-spatial-coarse-temporal remote sensing data with coarse-spatial-fine-temporal data, allowing for urban impervious surface mapping at both fine-spatial and fine-temporal resolutions. The STSRM involves two main steps: unmixing the coarse-spatial-fine-temporal remote sensing data to class fraction images, and downscaling the fraction images to sub-pixel land cover maps. Yet, challenges exist in each step when applying STSRM in mapping impervious surfaces. First, the impervious surfaces have high spectral variability (i.e., high intra-class and low inter-class variability), which impacts the accurate extraction of sub-pixel scale impervious surface fractions. Second, downscaling the fraction images to sub-pixel land cover maps is an ill-posed problem and would bring great uncertainty and error in the predictions. This paper proposed a new Spatiotemporal Continuous Impervious Surface Mapping (STCISM) method to deal with these challenges in fusing Landsat and Google Earth imagery. The STCISM used the Multiple Endmember Spectral Mixture Analysis and the Fisher Discriminant Analysis to minimize the within-class variability and maximize the between-class variability to reduce the spectral unmixing uncertainty. In addition, the STCISM adopted a new temporal consistency check model to incorporate temporal contextual information to reduce the uncertainty in the time-series impervious surface prediction maps. Unlike the traditional temporal consistency check model that assumed the impervious-to-pervious conversion is unlikely to happen, the new model allowed the bidirectional conversions between pervious and impervious surfaces. The temporal consistency check was used as a post-procession method to correct the errors in the prediction maps. The proposed STCISM method was used to predict time-series impervious surface maps at 5 m resolution of Google Earth image at the Landsat frequency. The results showed that the proposed STCISM outperformed the STSRM model without using the temporal consistency check and the STSRM model using the temporal consistency check based on the unidirectional pervious-to-impervious surface conversion rule.

scholarly journals Spatial-Temporal Land Use and Land Cover Changes in Urban Areas Using Remote Sensing Images and GIS Analysis: The Case Study of Opole, Poland

Geosciences ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 312
Author(s):  
Barbara Wiatkowska ◽  
Janusz Słodczyk ◽  
Aleksandra Stokowska
Keyword(s):  
Remote Sensing ◽  
Land Use ◽  
Land Cover ◽  
Satellite Imagery ◽  
Urban Areas ◽  
Agricultural Land ◽  
Urban Expansion ◽  
Landsat 8 ◽  
Rate Of Increase ◽  
Management Procedures

Urban expansion is a dynamic and complex phenomenon, often involving adverse changes in land use and land cover (LULC). This paper uses satellite imagery from Landsat-5 TM, Landsat-8 OLI, Sentinel-2 MSI, and GIS technology to analyse LULC changes in 2000, 2005, 2010, 2015, and 2020. The research was carried out in Opole, the capital of the Opole Agglomeration (south-western Poland). Maps produced from supervised spectral classification of remote sensing data revealed that in 20 years, built-up areas have increased about 40%, mainly at the expense of agricultural land. Detection of changes in the spatial pattern of LULC showed that the highest average rate of increase in built-up areas occurred in the zone 3–6 km (11.7%) and above 6 km (10.4%) from the centre of Opole. The analysis of the increase of built-up land in relation to the decreasing population (SDG 11.3.1) has confirmed the ongoing process of demographic suburbanisation. The paper shows that satellite imagery and GIS can be a valuable tool for local authorities and planners to monitor the scale of urbanisation processes for the purpose of adapting space management procedures to the changing environment.

scholarly journals A Modified Bare Soil Index to Identify Bare Land Features during Agricultural Fallow-Period in Southeast Asia Using Landsat 8

Land ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 231
Author(s):  
Can Trong Nguyen ◽  
Amnat Chidthaisong ◽  
Phan Kieu Diem ◽  
Lian-Zhi Huo
Keyword(s):  
Remote Sensing ◽  
Land Cover ◽  
Urban Areas ◽  
Near Infrared ◽  
Urban Landscape ◽  
Bare Soil ◽  
Critical Element ◽  
Landsat 8 ◽  
Climate Conditions ◽  
Fallow Period

Bare soil is a critical element in the urban landscape and plays an essential role in urban environments. Yet, the separation of bare soil and other land cover types using remote sensing techniques remains a significant challenge. There are several remote sensing-based spectral indices for barren detection, but their effectiveness varies depending on land cover patterns and climate conditions. Within this research, we introduced a modified bare soil index (MBI) using shortwave infrared (SWIR) and near-infrared (NIR) wavelengths derived from Landsat 8 (OLI—Operational Land Imager). The proposed bare soil index was tested in two different bare soil patterns in Thailand and Vietnam, where there are large areas of bare soil during the agricultural fallow period, obstructing the separation between bare soil and urban areas. Bare soil extracted from the MBI achieved higher overall accuracy of about 98% and a kappa coefficient over 0.96, compared to bare soil index (BSI), normalized different bare soil index (NDBaI), and dry bare soil index (DBSI). The results also revealed that MBI considerably contributes to the accuracy of land cover classification. We suggest using the MBI for bare soil detection in tropical climatic regions.

scholarly journals Predicting Aedes aegypti infestation using landscape and thermal features

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Camila Lorenz ◽  
Marcia C. Castro ◽  
Patricia M. P. Trindade ◽  
Maurício L. Nogueira ◽  
Mariana de Oliveira Lage ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Aedes Aegypti ◽  
Vector Control ◽  
Land Surface ◽  
Urban Areas ◽  
Negative Binomial ◽  
Control Strategies ◽  
Winter Season ◽  
Landsat 8 ◽  
Thermal Features

AbstractIdentifying Aedes aegypti breeding hotspots in urban areas is crucial for the design of effective vector control strategies. Remote sensing techniques offer valuable tools for mapping habitat suitability. In this study, we evaluated the association between urban landscape, thermal features, and mosquito infestations. Entomological surveys were conducted between 2016 and 2019 in Vila Toninho, a neighborhood of São José do Rio Preto, São Paulo, Brazil, in which the numbers of adult female Ae. aegypti were recorded monthly and grouped by season for three years. We used data from 2016 to 2018 to build the model and data from summer of 2019 to validate it. WorldView-3 satellite images were used to extract land cover classes, and land surface temperature data were obtained using the Landsat-8 Thermal Infrared Sensor (TIRS). A multilevel negative binomial model was fitted to the data, which showed that the winter season has the greatest influence on decreases in mosquito abundance. Green areas and pavements were negatively associated, and a higher cover of asbestos roofs and exposed soil was positively associated with the presence of adult females. These features are related to socio-economic factors but also provide favorable breeding conditions for mosquitos. The application of remote sensing technologies has significant potential for optimizing vector control strategies, future mosquito suppression, and outbreak prediction.

scholarly journals URBAN IMPERVIOUS SURFACE EXTRACTION BASED ON REMOTE SENSING IMAGES

2020 ◽  
Vol XLII-3/W10 ◽  
pp. 357-360
Author(s):  
X. Y. Long ◽  
Z. F. Shao ◽  
X. X. Feng
Keyword(s):  
Rapid Development ◽  
Impervious Surface ◽  
Support Vector ◽  
Impervious Surfaces ◽  
Surface Distribution ◽  
Human Environment ◽  
Important Indicator ◽  
Urbanization Level ◽  
Urban Impervious Surfaces

Abstract. Urban planning and constructions affect spatial patterns of urban impervious surfaces, which in turn modify the urban environment and affect human-environment interactions. Impervious surfaces can redistribute precipitation patterns, and the perviousness–imperviousness ratio is considered as one important indicator for assessing the degree of urbanization and the quality of urban eco-environment. The spatial distribution and dynamics of impervious surfaces contribute to better understand urbanization and its impacts on regional or urban hydrological environment, surface temperature balance and biodiversity, etc. Hengqin new area is located in Hengqin island, south of Zhuhai city, adjacent to Hong Kong and Macao. It was officially established as a free trade zone in 2009. Due to the rapid development of Hengqin in recent years, this paper discusses Landsat8 imagery of time series in mapping impervious surfaces, and analysis the changes of impervious surface in Hengqin from 2013 to 2018. Support vector machine (SVM) is a classical classifier that is supervised learning models and that use related learning algorithms to analyze data for classification and regression analysis (Vapnik, 1995). In this paper, we obtain the impervious surface distribution via SVM and get good accuracy. The impervious surface distribution of Hengqin in six years show that the quickly improve of urbanization level. However, with the development of urbanization, the impervious surface has not changed dramatically, which shows that the decision-making of urban managers is correct. After the urbanization construction in Hengqin, it is still an ecological island.

Sign in / Sign up

Export Citation Format

Share Document