scholarly journals Metal-Based Electrocatalysts for High-Performance Lithium-Sulfur Batteries: A Review

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1137
Author(s):  
Kiran Mahankali ◽  
Sudhan Nagarajan ◽  
Naresh Kumar Thangavel ◽  
Sathish Rajendran ◽  
Munaiah Yeddala ◽  
...  
Keyword(s):  
Energy Storage ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Rate Capability ◽  
High Energy ◽  
High Energy Density ◽  
Storage Device ◽  
Next Generation ◽  
End Products ◽  
Lithium Sulfur

The lithium-sulfur (Li-S) redox battery system is considered to be the most promising next-generation energy storage technology due to its high theoretical specific capacity (1673 mAh g−1), high energy density (2600 Wh kg−1), low cost, and the environmentally friendly nature of sulfur. Though this system is deemed to be the next-generation energy storage device for portable electronics and electric vehicles, its poor cycle life, low coulombic efficiency and low rate capability limit it from practical applications. These performance barriers were linked to several issues like polysulfide (LiPS) shuttle, inherent low conductivity of charge/discharge end products, and poor redox kinetics. Here, we review the recent developments made to alleviate these problems through an electrocatalysis approach, which is considered to be an effective strategy not only to trap the LiPS but also to accelerate their conversion reactions kinetics. Herein, the influence of different chemical interactions between the LiPS and the catalyst surfaces and their effect on the conversion of liquid LiPS to solid end products are reviewed. Finally, we also discussed the challenges and perspectives for designing cathode architectures to enable high sulfur loading along with the capability to rapidly convert the LiPS.

scholarly journals Confine sulfur in double-hollow carbon sphere integrated with carbon nanotubes for advanced lithium–sulfur batteries

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Maru Dessie Walle ◽  
You-Nian Liu
Keyword(s):  
Carbon Nanotubes ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Carbon Sphere ◽  
Hollow Carbon Sphere ◽  
Lithium Sulfur Batteries ◽  
Hollow Carbon ◽  
Lithium Sulfur

AbstractThe lithium–sulfur (Li–S) batteries are promising because of the high energy density, low cost, and natural abundance of sulfur material. Li–S batteries have suffered from severe capacity fading and poor cyclability, resulting in low sulfur utilization. Herein, S-DHCS/CNTs are synthesized by integration of a double-hollow carbon sphere (DHCS) with carbon nanotubes (CNTs), and the addition of sulfur in DHCS by melt impregnations. The proposed S-DHCS/CNTs can effectively confine sulfur and physically suppress the diffusion of polysulfides within the double-hollow structures. CNTs act as a conductive agent. S-DHCS/CNTs maintain the volume variations and accommodate high sulfur content 73 wt%. The designed S-DHCS/CNTs electrode with high sulfur loading (3.3 mg cm−2) and high areal capacity (5.6 mAh mg cm−2) shows a high initial specific capacity of 1709 mAh g−1 and maintains a reversible capacity of 730 mAh g−1 after 48 cycles at 0.2 C with high coulombic efficiency (100%). This work offers a fascinating strategy to design carbon-based material for high-performance lithium–sulfur batteries.

Nitrogen-Doped Multi-Channel Carbon Nanofibers Incorporated with Nickel Nanoparticles as Multifunctional Modification of Separator for Ultra Stable Li-S Batteries

2021 ◽  
Author(s):  
Zhikang Wang ◽  
Guiqiang Cao ◽  
Da Bi ◽  
Tian-Xiong Tan ◽  
Qingxue Lai ◽  
...  
Keyword(s):  
Nickel Nanoparticles ◽  
Specific Capacity ◽  
High Energy ◽  
High Energy Density ◽  
Storage Device ◽  
Energy Storage Device ◽  
High Specific Capacity ◽  
Nitrogen Doped ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur

Lithium-Sulfur batteries have been regarded as the most promising electrochemical energy storage device in consideration of their satisfactory high specific capacity and high energy density. However, the inferior conversion efficiency...

CNFs/S1-xSex Composites as Promising Cathode Materials for High-Energy Lithium-Sulfur Batteries

MRS Advances ◽  
2019 ◽  
Vol 4 (14) ◽  
pp. 821-828 ◽  
Author(s):  
Gaind P. Pandey ◽  
Kobi Jones ◽  
Lamartine Meda
Keyword(s):  
Cathode Material ◽  
High Performance ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Rate Capability ◽  
Composite Cathode ◽  
High Energy ◽  
High Mass ◽  
High Performance Composite ◽  
Lithium Sulfur

ABSTRACTHigh-energy lithium-sulfur (Li-S) batteries still suffer from poor rate capability and short cycle life caused by the polysulfides shuttle and insulating nature of S (and the discharge product, Li2S). Selenium disulfide (SeS2), with a theoretical specific capacity of 1342 mAh g−1, is a promising cathode material as it has better conductivity compared to sulfur. The electrochemical reaction kinetics of CNFs-S/SeS2 composites (denoted as CNFs/S1-xSex, where x ≤ 0.1) are expected to be remarkably improved because of the better conductivity of SeS2 compared to sulfur. Here, a high-performance composite cathode material of CNFs/S1-xSex for novel Li-S batteries is reported. The CNFs/S1-xSex composites combine the higher conductivity and higher density of SeS2 with high specific capacity of sulfur. The CNFs/S1-xSex electrode shows good initial discharge capacity of ∼1050 mAh g−1 at 0.05 C rate with high mass loading of materials (∼6-7 mg cm−2 of composites) and > 97% initial coulombic efficiency. The CNFs/S1-xSex electrode shows more than 600 mAh g-1 specific capacity after 50 charge-discharge cycles at 0.5C rate, much higher compared to the CNFs/S cathodes.

scholarly journals High-Energy and High-Power Pseudocapacitor–Battery Hybrid Sodium-Ion Capacitor with Na+ Intercalation Pseudocapacitance Anode

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Qiulong Wei ◽  
Qidong Li ◽  
Yalong Jiang ◽  
Yunlong Zhao ◽  
Shuangshuang Tan ◽  
...  
Keyword(s):  
Energy Density ◽  
High Power ◽  
Anode Materials ◽  
High Performance ◽  
Coulombic Efficiency ◽  
Specific Capacity ◽  
Rate Capability ◽  
High Energy ◽  
Sodium Ion ◽  
High Energy Density

AbstractHigh-performance and low-cost sodium-ion capacitors (SICs) show tremendous potential applications in public transport and grid energy storage. However, conventional SICs are limited by the low specific capacity, poor rate capability, and low initial coulombic efficiency (ICE) of anode materials. Herein, we report layered iron vanadate (Fe5V15O39 (OH)9·9H2O) ultrathin nanosheets with a thickness of ~ 2.2 nm (FeVO UNSs) as a novel anode for rapid and reversible sodium-ion storage. According to in situ synchrotron X-ray diffractions and electrochemical analysis, the storage mechanism of FeVO UNSs anode is Na+ intercalation pseudocapacitance under a safe potential window. The FeVO UNSs anode delivers high ICE (93.86%), high reversible capacity (292 mAh g−1), excellent cycling stability, and remarkable rate capability. Furthermore, a pseudocapacitor–battery hybrid SIC (PBH-SIC) consisting of pseudocapacitor-type FeVO UNSs anode and battery-type Na3(VO)2(PO4)2F cathode is assembled with the elimination of presodiation treatments. The PBH-SIC involves faradaic reaction on both cathode and anode materials, delivering a high energy density of 126 Wh kg−1 at 91 W kg−1, a high power density of 7.6 kW kg−1 with an energy density of 43 Wh kg−1, and 9000 stable cycles. The tunable vanadate materials with high-performance Na+ intercalation pseudocapacitance provide a direction for developing next-generation high-energy capacitors.

Transition Metal Phosphides：New Generation Cathode Host/Separator Modifier for Li-S Batteries

2021 ◽  
Author(s):  
Song Huang ◽  
Huixiang Ang ◽  
Yang Yang ◽  
Minghui Ye ◽  
Yufei Zhang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Transition Metal ◽  
Storage System ◽  
Energy Storage System ◽  
High Energy ◽  
High Energy Density ◽  
Next Generation ◽  
Lithium Sulfur

Owing to promising applications in aircraft, military field and submarine etc., lithium-sulfur (Li-S) batteries with high energy density (2500 Wh·kg-1) are emerging as the next-generation energy storage system at low...

scholarly journals Enhanced Potassium-Ion Storage of the 3D Carbon Superstructure by Manipulating the Nitrogen-Doped Species and Morphology

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Yanhua Li ◽  
Kui Xiao ◽  
Cong Huang ◽  
Jin Wang ◽  
Ming Gao ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Density Functional ◽  
Large Scale ◽  
Specific Capacity ◽  
Rate Capability ◽  
High Energy ◽  
Potassium Ion ◽  
High Energy Density ◽  
Superior Performance

Abstract Potassium-ion batteries (PIBs) are attractive for grid-scale energy storage due to the abundant potassium resource and high energy density. The key to achieving high-performance and large-scale energy storage technology lies in seeking eco-efficient synthetic processes to the design of suitable anode materials. Herein, a spherical sponge-like carbon superstructure (NCS) assembled by 2D nanosheets is rationally and efficiently designed for K+ storage. The optimized NCS electrode exhibits an outstanding rate capability, high reversible specific capacity (250 mAh g−1 at 200 mA g−1 after 300 cycles), and promising cycling performance (205 mAh g−1 at 1000 mA g−1 after 2000 cycles). The superior performance can be attributed to the unique robust spherical structure and 3D electrical transfer network together with nitrogen-rich nanosheets. Moreover, the regulation of the nitrogen doping types and morphology of NCS-5 is also discussed in detail based on the experiments results and density functional theory calculations. This strategy for manipulating the structure and properties of 3D materials is expected to meet the grand challenges for advanced carbon materials as high-performance PIB anodes in practical applications.

scholarly journals Enhancing the Electrochemical Properties of LaCoO3 by Sr-Doping, rGO-Compounding with Rational Design for Energy Storage Device

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Bin Zhang ◽  
Chuanfu Yu ◽  
Zijiong Li
Keyword(s):  
Energy Storage ◽  
Electrochemical Properties ◽  
Rational Design ◽  
Sol Gel ◽  
Specific Capacity ◽  
Functional Materials ◽  
High Energy ◽  
High Energy Density ◽  
Storage Device ◽  
Electrochemical Performances

Abstract Perovskite oxides, as a kind of functional materials, have been widely studied in recent years due to its unique physical, chemical, and electrical properties. Here, we successfully prepared perovskite-type LaCoO3 (LCOs) nanomaterials via an improved sol-gel method followed by calcination, and investigated the influence of calcination temperature and time on the morphology, structure, and electrochemical properties of LaCoO3 nanomaterials. Then, based on the optimal electrochemical performance of LCO-700-4 electrode sample, the newly synthesized nanocomposites of Sr-doping (LSCO-0.2) and rGO-compounding (rGO@LCO) through rational design exhibited a 1.45-fold and 2.03-fold enhancement in its specific capacitance (specific capacity). The rGO@LCO electrode with better electrochemical performances was further explored by assembling rGO@LCO//rGO asymmetric supercapacitor system (ASS) with aqueous electrolyte. The result showed that the ASS delivers a high energy density of 17.62 W h kg−1 and an excellent cyclic stability with 94.48% of initial capacitance after 10,000 cycles, which are good electrochemical performances among aqueous electrolytes for green and new efficient energy storage devices.

scholarly journals Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3586
Author(s):  
Qi An ◽  
Xingru Zhao ◽  
Shuangfu Suo ◽  
Yuzhu Bai
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Power Density ◽  
High Power ◽  
Specific Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
Cycle Life ◽  
High Energy Density ◽  
Lithium Ion Capacitor

Lithium-ion capacitors (LICs) have been widely explored for energy storage. Nevertheless, achieving good energy density, satisfactory power density, and stable cycle life is still challenging. For this study, we fabricated a novel LIC with a NiO-rGO composite as a negative material and commercial activated carbon (AC) as a positive material for energy storage. The NiO-rGO//AC system utilizes NiO nanoparticles uniformly distributed in rGO to achieve a high specific capacity (with a current density of 0.5 A g−1 and a charge capacity of 945.8 mA h g−1) and uses AC to provide a large specific surface area and adjustable pore structure, thereby achieving excellent electrochemical performance. In detail, the NiO-rGO//AC system (with a mass ratio of 1:3) can achieve a high energy density (98.15 W h kg−1), a high power density (10.94 kW kg−1), and a long cycle life (with 72.1% capacity retention after 10,000 cycles). This study outlines a new option for the manufacture of LIC devices that feature both high energy and high power densities.

High-energy green supercapacitor driven by ionic liquid electrolytes as an ultra-high stable next-generation energy storage device

2018 ◽  
Vol 383 ◽  
pp. 102-109 ◽  
Author(s):  
Ranjith Thangavel ◽  
Aravindaraj G. Kannan ◽  
Rubha Ponraj ◽  
Vigneysh Thangavel ◽  
Dong-Won Kim ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Energy Storage ◽  
High Energy ◽  
Storage Device ◽  
Energy Storage Device ◽  
Next Generation ◽  
Liquid Electrolytes

scholarly journals Stable Lithium-Carbon Composite Enabled by Dual-Salt Additives

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Lei Zheng ◽  
Feng Guo ◽  
Tuo Kang ◽  
Yingzhu Fan ◽  
Wei Gu ◽  
...  
Keyword(s):  
Coulombic Efficiency ◽  
Solid Electrolyte Interphase ◽  
Rate Capability ◽  
Negative Electrode ◽  
High Energy ◽  
Carbon Composite ◽  
High Reactivity ◽  
Cycling Stability ◽  
High Energy Density ◽  
Lithium Metal

AbstractLithium metal is regarded as the ultimate negative electrode material for secondary batteries due to its high energy density. However, it suffers from poor cycling stability because of its high reactivity with liquid electrolytes. Therefore, continuous efforts have been put into improving the cycling Coulombic efficiency (CE) to extend the lifespan of the lithium metal negative electrode. Herein, we report that using dual-salt additives of LiPF6 and LiNO3 in an ether solvent-based electrolyte can significantly improve the cycling stability and rate capability of a Li-carbon (Li-CNT) composite. As a result, an average cycling CE as high as 99.30% was obtained for the Li-CNT at a current density of 2.5 mA cm–2 and an negative electrode to positive electrode capacity (N/P) ratio of 2. The cycling stability and rate capability enhancement of the Li-CNT negative electrode could be attributed to the formation of a better solid electrolyte interphase layer that contains both inorganic components and organic polyether. The former component mainly originates from the decomposition of the LiNO3 additive, while the latter comes from the LiPF6-induced ring-opening polymerization of the ether solvent. This novel surface chemistry significantly improves the CE of Li negative electrode, revealing its importance for the practical application of lithium metal batteries.

Sign in / Sign up

Export Citation Format

Share Document