scholarly journals Influence of Phase Composition and Pretreatment on the Conversion of Iron Oxides into Iron Carbides in Syngas Atmospheres

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 773
Author(s):  
Aleks Arinchtein ◽  
Meng-Yang Ye ◽  
Michael Geske ◽  
Marvin Frisch ◽  
Ralph Kraehnert

CO2 Fischer–Tropsch synthesis (CO2–FTS) is a promising technology enabling conversion of CO2 into valuable chemical feedstocks via hydrogenation. Iron–based CO2–FTS catalysts are known for their high activities and selectivities towards the formation of higher hydrocarbons. Importantly, iron carbides are the presumed active phase strongly associated with the formation of higher hydrocarbons. Yet, many factors such as reaction temperature, atmosphere, and pressure can lead to complex transformations between different oxide and/or carbide phases, which, in turn, alter selectivity. Thus, understanding the mechanism and kinetics of carbide formation remains challenging. We propose model–type iron oxide films of controlled nanostructure and phase composition as model materials to study carbide formation in syngas atmospheres. In the present work, different iron oxide precursor films with controlled phase composition (hematite, ferrihydrite, maghemite, maghemite/magnetite) and ordered mesoporosity are synthesized using the evaporation–induced self–assembly (EISA) approach. The model materials are then exposed to a controlled atmosphere of CO/H2 at 300 °C. Physicochemical analysis of the treated materials indicates that all oxides convert into carbides with a core–shell structure. The structure appears to consist of crystalline carbide cores surrounded by a partially oxidized carbide shell of low crystallinity. Larger crystallites in the original iron oxide result in larger carbide cores. The presented simple route for the synthesis and analysis of soft–templated iron carbide films will enable the elucidation of the dynamics of the oxide to carbide transformation in future work.

2020 ◽  
Vol 6 (4) ◽  
pp. 73
Author(s):  
Panagiotis Ziogas ◽  
Athanasios B. Bourlinos ◽  
Jiri Tucek ◽  
Ondrej Malina ◽  
Alexios P. Douvalis

The synthesis and characterization of a new line of magnetic hybrid nanostructured materials composed of spinel-type iron oxide to iron carbide nanoparticles grown on nanodiamond nanotemplates is reported in this study. The realization of these nanohybrid structures is achieved through thermal processing under vacuum at different annealing temperatures of a chemical precursor, in which very fine maghemite (γ-Fe2O3) nanoparticles seeds were developed on the surface of the nanodiamond nanotemplates. It is seen that low annealing temperatures induce the growth of the maghemite nanoparticle seeds to fine dispersed spinel-type non-stoichiometric ~5 nm magnetite (Fe3−xO4) nanoparticles, while intermediate annealing temperatures lead to the formation of single phase ~10 nm cementite (Fe3C) iron carbide nanoparticles. Higher annealing temperatures produce a mixture of larger Fe3C and Fe5C2 iron carbides, triggering simultaneously the growth of large-sized carbon nanotubes partially filled with these carbides. The magnetic features of the synthesized hybrid nanomaterials reveal the properties of their bearing magnetic phases, which span from superparamagnetic to soft and hard ferromagnetic and reflect the intrinsic magnetic properties of the containing phases, as well as their size and interconnection, dictated by the morphology and nature of the nanodiamond nanotemplates. These nanohybrids are proposed as potential candidates for important technological applications in nano-biomedicine and catalysis, while their synthetic route could be further tuned for development of new magnetic nanohybrid materials.


2008 ◽  
Vol 84 (3-4) ◽  
pp. 607-615 ◽  
Author(s):  
E. Tzimpilis ◽  
N. Moschoudis ◽  
M. Stoukides ◽  
P. Bekiaroglou

2012 ◽  
Vol 02 (01) ◽  
pp. 28-33
Author(s):  
Aleksandr A. Lamberov ◽  
Ekaterina V. Dementyeva ◽  
Dmitriy I. Vavilov ◽  
Olga V. Kuzmina ◽  
Rinat R. Gilmullin ◽  
...  

Metals ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1590
Author(s):  
Changyong Chen ◽  
Meng Sun ◽  
Bao Wang ◽  
Jianan Zhou ◽  
Zhouhua Jiang

Steel tire cord and steel saw wire represent typical precision pearlitic steel wire rods of wire products; it is a very important solar energy material with a diameter about 50 μm. This paper mainly discusses the research progress of the wire rod drawing process, and its main contents are as follows: First section—the control of the wire rod surface quality is summarized, including the thickness of the surface decarburization layer, the phase composition and thickness of the surface iron oxide scale, and the removal of surface iron oxide scale. Then, the research progress of the wire rod water bath treatment process during sorbitization is summarized. In addition, the development of brass plating technology for steel wire is summarized, including copper plating technology, coating phase composition, etc. Furthermore, the development of steel wire drawing methods is summarized. Finally, the development of the dies used in steel wire drawings is summarized.


2002 ◽  
Vol 739 ◽  
Author(s):  
Benjamin L. Frankamp ◽  
Andrew K. Boal ◽  
Vincent M. Rotello

ABSTRACTControl of particle-particle spacing is a key determinant of optical, electronic, and magnetic properties of nanocomposite materials. We have used poly(amidoamine) (PAMAM) dendrimers to assemble carboxylic acid-functionalized mixed monolayer protected clusters (MMPCs) through acid/base chemistry between particle and polymer. IR spectroscopy and selective dendrimer staining, observed by Transmission Electron Microscopy (TEM), establish that the PAMAM dendrimers are the mortar in the assembly and act to space the MMPCs in the resulting aggregates. Small angle X-ray scattering (SAXS) was then used to establish average interparti cle distances; five generations of PAMAM dendrimer (0, 1, 2, 4, 6) were investigated and monotonic increase in interparticle spacing from 4.1 nm to 6.1 nm was observed.Initial studies involving the application of this methodology to control the magnetic properties of 3-iron oxide nanoparticles have been completed. γ-Iron oxide nanoparticles (6.5 nm in diameter) have been assembled with PAMAM dendrimers generations 2.5, 4.5, and 6.5. The resulting aggregates were characterized with SAXS and magnetization obtained on a super conducting quantum interference devise (SQUID). An observed correlation between the blocking temperature (TB) and the average interparticle spacing suggests that our methodology could be used to tailor the magnetic profile of the nanoparticles.


2006 ◽  
Vol 12 (2) ◽  
pp. 124-134 ◽  
Author(s):  
Yaming Jin ◽  
Huifang Xu ◽  
Abhaya K. Datye

Electron energy loss spectroscopy (EELS), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy have been used to study iron catalysts for Fischer–Tropsch synthesis. When silica-containing iron oxide precursors are activated in flowing CO, the iron phase segregates into iron carbide crystallites, leaving behind some unreduced iron oxide in an amorphous state coexisting with the silica binder. The iron carbide crystallites are found covered by characteristic amorphous carbonaceous surface layers. These amorphous species are difficult to analyze by traditional catalyst characterization techniques, which lack spatial resolution. Even a surface-sensitive technique such as XPS shows only broad carbon or iron peaks in these catalysts. As we show in this work, EELS allows us to distinguish three different carbonaceous species: reactive amorphous carbon, graphitic carbon, and carbidic carbon in the bulk of the iron carbide particles. The carbidic carbon K edge shows an intense “π*” peak with an edge shift of about 1 eV to higher energy loss compared to that of the π* of amorphous carbon film or graphitic carbon. EELS analysis of the oxygen K edge allows us to distinguish the amorphous unreduced iron phase from the silica binder, indicating these are two separate phases. These results shed light onto the complex phase transformations that accompany the activation of iron catalysts for Fischer–Tropsch synthesis.


Sign in / Sign up

Export Citation Format

Share Document