scholarly journals Adsorption and Sensing Properties of Dissolved Gas in Oil on Cr-Doped InN Monolayer: A Density Functional Theory Study

Chemosensors ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 30
Author(s):  
Guochao Qian ◽  
Jin Hu ◽  
Shan Wang ◽  
Weiju Dai ◽  
Qu Zhou
Keyword(s):  
Band Gap ◽  
Density Functional ◽  
Adsorption Property ◽  
Gas Analysis ◽  
Transformer Oil ◽  
Dissolved Gas ◽  
Adsorption Performance ◽  
Adsorption Of Co ◽  
Transformer Fault ◽  
Band Gap Structure

Dissolved gas analysis (DGA) is recognized as one of the most reliable methods in transformer fault diagnosis technology. In this paper, three characteristic gases of transformer oil (CO, C2H4, and CH4) were used in conjunction with a Cr-decorated InN monolayer according to first principle calculations. The adsorption performance of Cr–InN for these three gases were studied from several perspectives such as adsorption structures, adsorption energy, electron density, density of state, and band gap structure. The results revealed that the Cr–InN monolayer had good adsorption performance with CO and C2H4, while the band gap of the monolayer slightly changed after the adsorption of CO and C2H4. Additionally, the adsorption property of the Cr–InN monolayer on CH4 was acceptable and a significant response was simultaneously generated. This paper provides the first insights regarding the possibility of Cr-doped InN monolayers for the detection of gases dissolved in oil.

Parallelization Analysis of Dissolved Gases in Transformer Oil Based on Random Forest Algorithm

2014 ◽  
Vol 519-520 ◽  
pp. 98-101
Author(s):  
De Wen Wang ◽  
Zhi Wei Sun
Keyword(s):  
Fault Diagnosis ◽  
Random Forest ◽  
Power Transformer ◽  
Gas Analysis ◽  
Transformer Oil ◽  
Dissolved Gases ◽  
Random Forest Algorithm ◽  
Dissolved Gas ◽  
Important Method ◽  
Transformer Fault

Dissolved gas analysis (DGA) in oil is an important method for transformer fault diagnosis. This paper use random forest parallelization algorithm to analysis the dissolved gases in transformer oil. This method can achieve a fast parallel fault diagnosis for power equipment. Experimental results of the diagnosis of parallelization of random forest algorithm with DGA samples show that this algorithm not only can improve the accuracy of fault diagnosis, and more appropriate for dealing with huge amounts of data, but also can meet the smart grid requirements for fast fault diagnosis for power transformer. And this result also verifies the feasibility and effectiveness of the algorithm.

Transformer Fault Diagnosis with the Duval Triangle and Heuristic Techniques

2014 ◽  
Vol 535 ◽  
pp. 157-161
Author(s):  
Jeeng Min Ling ◽  
Ming Jong Lin ◽  
Chao Tang Yu
Keyword(s):  
Fault Diagnosis ◽  
Power Transformer ◽  
Gas Analysis ◽  
Transformer Oil ◽  
Dissolved Gas ◽  
Power Company ◽  
Triangle Method ◽  
Diagnosis Method ◽  
Combustible Gases ◽  
Transformer Fault

Dissolved gas analysis (DGA) is an effective tool for detecting incipient faults in power transformers. The ANSI/IEEE C57.104 standards, the most popular guides for the interpretation of gases generated in oil-immersed transformers, and the IEC-Duval triangle method are integrated to develop the proposed power transformer fault diagnosis method. The key dissolved gases, including H2, CH4, C2H2, C2H4, C2H6, and total combustible gases (TCG), suggested by ASTM D3612s instruction for DGA is investigated. The tested data of the transformer oil were taken from the substations of Taiwan Power Company. Diagnosis results with the text form called IEC-Duval triangle method show the validation and accuracy to detect the incipient fault in the power transformer.

scholarly journals Fuzzy Algorithm for Power Transformer Diagnostics

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Nitin K. Dhote ◽  
Jagdish B. Helonde
Keyword(s):  
Gas Chromatography ◽  
Fuzzy Inference System ◽  
Fuzzy Inference ◽  
Power Transformer ◽  
Gas Analysis ◽  
Transformer Oil ◽  
Dissolved Gas ◽  
Inference System ◽  
Incipient Faults ◽  
The World

Dissolved gas analysis (DGA) of transformer oil has been one of the most reliable techniques to detect the incipient faults. Many conventional DGA methods have been developed to interpret DGA results obtained from gas chromatography. Although these methods are widely used in the world, they sometimes fail to diagnose, especially when DGA results fall outside conventional methods codes or when more than one fault exist in the transformer. To overcome these limitations, the fuzzy inference system (FIS) is proposed. Two hundred different cases are used to test the accuracy of various DGA methods in interpreting the transformer condition.

scholarly journals Improved Fuzzy C-Means Clustering for Transformer Fault Diagnosis Using Dissolved Gas Analysis Data

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2344 ◽  
Author(s):  
Enwen Li ◽  
Linong Wang ◽  
Bin Song ◽  
Siliang Jian
Keyword(s):  
Fault Diagnosis ◽  
Membership Function ◽  
Data Clustering ◽  
Clustering Algorithm ◽  
Gas Analysis ◽  
Dissolved Gas ◽  
Fuzzy C Means ◽  
Dissolved Gas Analysis ◽  
Fcm Clustering ◽  
Transformer Fault

Dissolved gas analysis (DGA) of the oil allows transformer fault diagnosis and status monitoring. Fuzzy c-means (FCM) clustering is an effective pattern recognition method, but exhibits poor clustering accuracy for dissolved gas data and usually fails to subsequently correctly classify transformer faults. The existing feasible approach involves combination of the FCM clustering algorithm with other intelligent algorithms, such as neural networks and support vector machines. This method enables good classification; however, the algorithm complexity is greatly increased. In this paper, the FCM clustering algorithm itself is improved and clustering analysis of DGA data is realized. First, the non-monotonicity of the traditional clustering membership function with respect to the sample distance and its several local extrema are discussed, which mainly explain the poor classification accuracy of DGA data clustering. Then, an exponential form of the membership function is proposed to obtain monotony with respect to distance, thereby improving the dissolved gas data clustering. Likewise, a similarity function to determine the degree of membership is derived. Test results for large datasets show that the improved clustering algorithm can be successfully applied for DGA-data-based transformer fault detection.

scholarly journals Power Transformer Fault Diagnosis Based on Dissolved Gas Analysis by Correlation Coefficient-DBSCAN

2020 ◽  
Vol 10 (13) ◽  
pp. 4440 ◽  
Author(s):  
Yongxin Liu ◽  
Bin Song ◽  
Linong Wang ◽  
Jiachen Gao ◽  
Rihong Xu
Keyword(s):  
Fault Diagnosis ◽  
Correlation Coefficient ◽  
Power Transformer ◽  
Gas Analysis ◽  
Gas Content ◽  
Amplification Coefficient ◽  
Dissolved Gas ◽  
Dissolved Gas Analysis ◽  
Density Clustering ◽  
Transformer Fault

The transformers work in a complex environment, which makes them prone to failure. Dissolved gas analysis (DGA) is one of the most important methods for oil-immersed transformers’ internal insulation fault diagnosis. In view of the high correlation of the same fault data of transformers, this paper proposes a new method for transformers’ fault diagnosis based on correlation coefficient density clustering, which uses density clustering to extrapolate the correlation coefficient of DGA data. Firstly, we calculated the correlation coefficient of dissolved gas content in the fault transformers oil and enlarged the correlation of the same fault category by introducing the amplification coefficient, and finally we used the density clustering method to cluster diagnosis. The experimental results show that the accuracy of clustering is improved by 32.7% compared with the direct clustering judgment without using correlation coefficient, which can effectively cluster different types of transformers fault modes. This method provides a new idea for transformers fault identification, and has practical application value.

Sign in / Sign up

Export Citation Format

Share Document