scholarly journals Ion Charge Influence on the Molecular Structure of Polyethylene Terephthalate Films after Irradiation with Swift Heavy Ions

Crystals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 479
Author(s):  
Adil Z. Tuleushev ◽  
Maxim V. Zdorovets ◽  
Artem L. Kozlovskiy ◽  
Fiona E. Harrison
Keyword(s):  
Polyethylene Terephthalate ◽  
Structural Changes ◽  
Diffraction Method ◽  
Dipole Interaction ◽  
Heavy Ion ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Chain Molecules ◽  
Repeat Units ◽  
Pet Film

We report here experimental results investigating the influence of the initial swift heavy ion charge on the structure of polyethylene terephthalate (PET) film after irradiation, using a structurally sensitive X-ray diffraction method. Kr ions with an energy of 100 MeV and charges of 13+, 14+, and 15+ were each used at irradiation fluences of 5 × 1010, 7.5 × 1010, 1 × 1011, 2.5 × 1011 and 5 × 1011 ions/cm2. At constant energy and irradiation fluence, the post-irradiation structural changes in PET film show a clear dependence on the initial ion charge. As either the fluence or ion charge increase, the latent tracks begin to overlap, leading to cross-linking of PET chain molecules to form rotational isomers (rotamers). We use the fluence corresponding to the onset of overlapping to estimate the size of latent tracks for different ion charges. At the highest fluences, the latent tracks become entirely overlapped, and the interchain cross-linking extends throughout the whole film. Since this cross-linking is due to the dipole–dipole interaction of subunits of repeat units of PET chain molecules, it is reversible, in contrast to the well-known chemical cross-linking of polymer chain molecules under irradiation.

XRD investigation of thermal degradation of some gamma-irradiated polyethylene terephthalate samples

2019 ◽  
Vol 33 (12) ◽  
pp. 1950111 ◽  
Author(s):  
Mihai Todica ◽  
Zoltan Kovacs-Krauss ◽  
Carmen Niculaescu ◽  
Marieta Mureşan-Pop
Keyword(s):  
Thermal Treatment ◽  
Polyethylene Terephthalate ◽  
Structural Changes ◽  
Diffraction Method ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Before And After ◽  
Gamma Irradiated ◽  
Different Doses

The modification of local structure of some commercial polyethylene terephthalate (PET) samples, gamma irradiated at different doses, was investigated by X-ray diffraction method before and after thermal treatment. Before the thermal treatment, the samples exposed to different doses of gamma radiations, does not show noticeable structural changes. However, the gamma exposure affects the thermal behavior of samples submitted to melting–cooling process. These modifications have been highlighted by X-ray diffraction, and confirmed also by thermal analysis and electron spin resonance spectroscopy.

Embedding Procedure for Water Swollen Samples

1970 ◽  
Vol 28 ◽  
pp. 504-505
Author(s):  
Ann M. Thomas ◽  
Virginia Shemeley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Exchange ◽  
Structural Changes ◽  
Cross Linking ◽  
Ion Exchange Resins ◽  
Transmission Electron ◽  
First Pass ◽  
Exchange Resins

Those samples which swell rapidly when exposed to water are, at best, difficult to section for transmission electron microscopy. Some materials literally burst out of the embedding block with the first pass by the knife, and even the most rapid cutting cycle produces sections of limited value. Many ion exchange resins swell in water; some undergo irreversible structural changes when dried. We developed our embedding procedure to handle this type of sample, but it should be applicable to many materials that present similar sectioning difficulties.The purpose of our embedding procedure is to build up a cross-linking network throughout the sample, while it is in a water swollen state. Our procedure was suggested to us by the work of Rosenberg, where he mentioned the formation of a tridimensional structure by the polymerization of the GMA biproduct, triglycol dimethacrylate.

scholarly journals The Effect of Surfactant-Modified Montmorillonite on the Cross-Linking Efficiency of Polysiloxanes

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2623
Author(s):  
Monika Wójcik-Bania ◽  
Jakub Matusik
Keyword(s):  
Total Pore Volume ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Cross ◽  
Chain Lengths ◽  
First Time ◽  
Substituent Influence ◽  
Benzyl Substituent

Polymer–clay mineral composites are an important class of materials with various applications in the industry. Despite interesting properties of polysiloxanes, such matrices were rarely used in combination with clay minerals. Thus, for the first time, a systematic study was designed to investigate the cross-linking efficiency of polysiloxane networks in the presence of 2 wt % of organo-montmorillonite. Montmorillonite (Mt) was intercalated with six quaternary ammonium salts of the cation structure [(CH3)2R’NR]+, where R = C12, C14, C16, and R’ = methyl or benzyl substituent. The intercalation efficiency was examined by X-ray diffraction, CHN elemental analysis, and Fourier transform infrared (FTIR) spectroscopy. Textural studies have shown that the application of freezing in liquid nitrogen and freeze-drying after the intercalation increases the specific surface area and the total pore volume of organo-Mt. The polymer matrix was a poly(methylhydrosiloxane) cross-linked with two linear vinylsiloxanes of different siloxane chain lengths between end functional groups. X-ray diffraction and transmission electron microscopy studies have shown that the increase in d-spacing of organo-Mt and the benzyl substituent influence the degree of nanofillers’ exfoliation in the nanocomposites. The increase in the degree of organo-Mt exfoliation reduces the efficiency of hydrosilylation reaction monitored by FTIR. This was due to physical hindrance induced by exfoliated Mt particles.

Multi-scale Investigation of Heterogeneous Swift Heavy Ion Tracks in Stannate Pyrochlore

2021 ◽  
Author(s):  
Eric O'Quinn ◽  
Cameron Tracy ◽  
William F. Cureton ◽  
Ritesh Sachan ◽  
Joerg C. Neuefeind ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heavy Ion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural Modifications ◽  
Multi Scale ◽  
Ion Tracks ◽  
Swift Heavy Ion ◽  
Transmission Electron

Er2Sn2O7 pyrochlore was irradiated with swift heavy Au ions (2.2 GeV), and the induced structural modifications were systematically examined using complementary characterization techniques including transmission electron microscopy (TEM), X-ray diffraction...

scholarly journals Measuring the structure and equation of state of polyethylene terephthalate at megabar pressures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
J. Lütgert ◽  
J. Vorberger ◽  
N. J. Hartley ◽  
K. Voigt ◽  
M. Rödel ◽  
...  
Keyword(s):  
Equation Of State ◽  
Polyethylene Terephthalate ◽  
Density Functional ◽  
Equations Of State ◽  
Md Simulations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
Shock Hugoniot ◽  
Highly Correlated

AbstractWe present structure and equation of state (EOS) measurements of biaxially orientated polyethylene terephthalate (PET, $$({\hbox {C}}_{10} {\hbox {H}}_8 {\hbox {O}}_4)_n$$ ( C 10 H 8 O 4 ) n , also called mylar) shock-compressed to ($$155 \pm 20$$ 155 ± 20 ) GPa and ($$6000 \pm 1000$$ 6000 ± 1000 ) K using in situ X-ray diffraction, Doppler velocimetry, and optical pyrometry. Comparing to density functional theory molecular dynamics (DFT-MD) simulations, we find a highly correlated liquid at conditions differing from predictions by some equations of state tables, which underlines the influence of complex chemical interactions in this regime. EOS calculations from ab initio DFT-MD simulations and shock Hugoniot measurements of density, pressure and temperature confirm the discrepancy to these tables and present an experimentally benchmarked correction to the description of PET as an exemplary material to represent the mixture of light elements at planetary interior conditions.

Sign in / Sign up

Export Citation Format

Share Document