scholarly journals The Integration of Vacuum Insulated Glass in Unitized Façade for the Development of Innovative Lightweight and Highly Insulating Energy Efficient Building Envelope—The Results of Eensulate Façade System Design

Designs ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 40
Author(s):  
Alessandro Pracucci ◽  
Sara Magnani ◽  
Oscar Casadei
Keyword(s):  
System Design ◽  
Energy Efficient ◽  
Building Envelope ◽  
Horizon 2020 ◽  
Thermal Bridge ◽  
Building Facades ◽  
U Value ◽  
Glass Surfaces ◽  
Aluminum Profiles ◽  
Design And Testing

The European Commission has identified the building industry as one of the key sectors to achieve its 2020 strategy to create conditions for smart, sustainable, and inclusive growth. In this frame, the aim of Horizon 2020′s Eensulate project is the development of innovative lightweight and highly insulating energy efficient unitized building façades, suitable for both new and existing buildings. The Eensulate façade module integrates two components developed within the project: Vacuum Insulated Glass (VIG) for architectural purposes, with a U-value of 0.3 W/sqm∙K; a highly insulating foam for automated manufacturing and insulation for the spandrel part. This article presents the Eensulate façade system design simulations and achievements related to VIG integration to solve issues that emerged by the utilization of its innovative components (sealant thermal bridge and getter strips). VIG design and testing have gradually changed the façade module and consequently, façade components have been progressively designed to achieve the expected target of 0.641 W/sqm∙K for thermal transmittance. The results demonstrate that the target can be achieved by aluminum profiles, Ethylene Propylene Diene Monomer (EPDM) thermal bridge, and additional insulating components, obtaining a new product for unitized façades able to reduce energy consumption in buildings with large glass surfaces.

scholarly journals Thermal Behaviour Analysis of Complex Joints for an Energy Efficient School Building

2021 ◽  
Vol 14 (1) ◽  
pp. 37-43
Author(s):  
Szilárd Karda ◽  
Tamás Nagy-György ◽  
József Boros
Keyword(s):  
Thermal Behaviour ◽  
Energy Efficient ◽  
Thermal Characteristics ◽  
School Building ◽  
Zero Energy ◽  
Energy Efficient Buildings ◽  
Thermal Bridge ◽  
Minimum Requirements ◽  
U Value ◽  
Thermal Simulations

Abstract Energy-efficient buildings have received increasing attention in recent times as they represent a direction that promotes the objectives of a sustainable, competitive and decarbonized energy policy. In order to meet the minimum requirements of the nearly zero-energy buildings (nZEB) the thermal characteristics of the envelope play an important role. The aim of the paper is to present and analyse the thermal behaviour of complex joints for an energy efficient school building, for which the formation of thermal bridges has been reduced by applying improved geometrical and technological solutions. Since most of the thermal bridge catalogues did not provide updated details for the studied joints, numerical calculations, as two-dimensional finite elements thermal simulations, were performed to determine thermal transmittance coefficients and the U-value..

OPTIMAL WINDOW GEOMETRY FACTORS FOR ELEMENTARY SCHOOL BUILDINGS IN PORTUGAL

2018 ◽  
Vol 13 (1) ◽  
pp. 185-198 ◽  
Author(s):  
Jorge S. Carlos
Keyword(s):  
Energy Efficient ◽  
Energy Savings ◽  
High Energy ◽  
Building Envelope ◽  
Major Influence ◽  
Thermal Discomfort ◽  
Building Component ◽  
U Value ◽  
High Energy Consumption ◽  
Optimal Window

INTRODUCTION With respect to thermal performance, windows are the weakest component of the building envelope, essentially because the U-value is usually higher than the opaque envelope. This would allow the highest heat conductance of the building envelope. However, it also helps buildings to gain useful solar heat during winter. Therefore, it has been generally accepted that passive buildings would have small windows towards the poles and large windows facing the equator (Persson, Roos, and Wall 2006). In spite of this guideline, large or fully glazed facades have been used in modern architecture. The intensive use of air conditioning is the result of overheating and high thermal loss problems, which otherwise would lead to thermal discomfort. This extensive use of large windows associated with high energy consumption has motivated researchers to study this building component. Window areas were investigated by Persson et al. (Persson, Roos, and Wall 2006) on 20 terraced houses with larger windows facing the equator and built in Gothenburg. The building envelope was well insulated and fitted with energy efficient windows. It was found that energy efficient windows do not have a major influence on the heating demand in the winter, but it is relevant for the cooling need in summer. Therefore, reduced indoor illuminance due to small windows can be solved by enlarging them in order to obtain relevant daylighting conditions. When efficient windows are designed for a warm climate, as in Mexico, reducing heat flux and solar transmittance indoors was the best option for energy savings (Aguilar et al. 2017). However, reducing solar transmittance influences the indoor illuminance, which was not analyzed.

scholarly journals A Comparative Study between Jordanian Overall Heat Transfer Coefficient (U-Value) and International Building Codes, With Thermal Bridges Effect Investigation

2021 ◽  
Vol 3 (1) ◽  
pp. p10
Author(s):  
Ammar Alkhalidi ◽  
Suhil Kiwan ◽  
Haya Hamasha
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Energy Demand ◽  
Building Envelope ◽  
Overall Heat Transfer Coefficient ◽  
Thermal Bridge ◽  
U Value ◽  
Thermal Bridges ◽  
Heating Degree Days

Depletion of fossil fuel and the environmental effect associated with the use of it have made the topic of “thermal insulation regulations” a major concern in country Jordan and worldwide. This paper reviews the overall heat transfer coefficient U-value in Jordanian code for the building envelope, which represents how much the building envelope transfer heat to the outside environment. U-value was reviewed with respect to the following factors, heating degree days, the heating load required to achieve thermal comfort. Based on the review a new U-value of 0.65 W/m2.K was proposed and it was found that this value reduces the energy demand almost 50%. Moreover, the thermal bridge effect was investigated and it was found that an obvious increase in the U-value is present when having thermal bridges; this will affect the energy demand, almost 200%.

Influence of Thermal Break Element Applied in Balcony Slab on Internal Surface Temperature

2014 ◽  
Vol 1057 ◽  
pp. 79-86
Author(s):  
Peter Buday ◽  
Rastislav Ingeli ◽  
Miroslav Čekon
Keyword(s):  
Energy Efficient ◽  
Energy Use ◽  
Internal Surface ◽  
Building Envelope ◽  
Cold Climate ◽  
Energy Efficient Buildings ◽  
Thermal Bridge ◽  
Advanced Analysis ◽  
Thermal Bridges ◽  
Energy Efficient Building

Reduction of energy use in buildings is an important measure to achieve climate change mitigation. It is essential to minimize heat losses when designing and building energy efficient buildings. For an energy-efficient building in a cold climate, a large part of the space heating demand is caused by transmission losses through the building envelope. To achieve this, it is necessary to have processed a detailed design of buildings. Thermal bridges have to be eliminated in the design of buildings. Thermal bridges occur as point ones or linear. One of the specific details that create thermal leakage is located in balcony slabs. The balcony is one of the main reasons of the increased heat loss of buildings. The presence of thermal bridge in constructions of balcony envelopes influences the energy consumption, durability of the building envelopes, and also the thermal comfort of occupants. This paper is focused on advanced analysis of thermal performance of thermal break element applied in balcony slab with parametric correlation to the thermal properties of wall building envelope.

Impact of roof shading on building energy performance in warm & humid climatic places of India

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Performance ◽  
General Assumption ◽  
Climatic Conditions ◽  
Building Envelope ◽  
Passive Cooling ◽  
Base Case ◽  
U Value ◽  
The Impact

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.

scholarly journals Modeling of non-standard geometry of energy-efficient building facades

2019 ◽  
Vol 91 ◽  
pp. 05024
Author(s):  
Natalia Knyazeva ◽  
Vladislav Larin
Keyword(s):  
Energy Efficient ◽  
Construction Projects ◽  
Parametric Modeling ◽  
Labor Costs ◽  
Building Facades ◽  
Standard Geometry ◽  
Energy Efficient Building ◽  
Standard Solutions

This article describes the approach of parametric modeling using modern software. This decision should help to change the already established rules for building BIM models. This approach became the basis of the idea of using parametric modeling for two main groups in the modern modeling of construction projects: modeling of the architectural appearance of the building and structures. This method can significantly reduce labor costs, and it also can be used to implement non-standard solutions in the design energy-efficient building facades.

scholarly journals Thermal bridge effect of vertical diagonal tie connectors in precast concrete sandwich panels: an experimental and computational study

2020 ◽  
Vol 172 ◽  
pp. 08001
Author(s):  
Paul Klõšeiko ◽  
Reimo Piir ◽  
Marti Jeltsov ◽  
Targo Kalamees
Keyword(s):  
Computational Study ◽  
Precast Concrete ◽  
Sandwich Panels ◽  
Building Envelope ◽  
Heat Fluxes ◽  
Air Cavity ◽  
Thermal Transmittance ◽  
Thermal Bridge ◽  
Thermal Bridging ◽  
Air Cavities

The purpose of this work was to quantify the thermal bridge effect of vertical diagonal tie connectors in precast concrete sandwich panels (PCSPs). Special interest was in cases where the use of rigid insulation (e.g. PIR) would leave air gaps between insulation boards and diagonal ties, thus intensifying the thermal bridge. A climate chamber experiment using 5 different joint types was performed to gather reference data for CFD model validation. In the experiment, natural convection was observed in joints where no additional insulation was used, i.e. in air cavities. Significantly larger heat fluxes were measured in these cavities compared to insulated joints. The thermal bridging effect was evaluated for a typical PCSP (thermal transmittance without thermal bridges U = 0.11 W/(m²·K)) using CFD software taking into account 3D heat conduction and convection. Simulation results indicate that diagonal ties without adjacent air cavities increased the average thermal transmittance (U-value) of the envelope by 8%, diagonal ties with a 6 mm air cavity – 19...33% and diagonal ties with a 10 mm air cavity – 45...56%. In conclusion, it was found that the joints in insulation caused by diagonal ties affect the overall thermal performance of the building envelope significantly when efforts are not made to fill the air cavities around the connectors.

scholarly journals Design of a New Solar Thermal Collector with Ceramic Materials Integrated into the Building Facades

Designs ◽  
2018 ◽  
Vol 2 (4) ◽  
pp. 44
Author(s):  
Jordi Roviras Miñana ◽  
Vicente Sarrablo Moreno
Keyword(s):  
Ceramic Materials ◽  
Building Envelope ◽  
Hot Water ◽  
Solar Thermal ◽  
Collector System ◽  
System A ◽  
Solar Thermal Collector ◽  
Building Facades ◽  
Solar Thermal Collectors ◽  
High Degree

The work presented here aims to demonstrate the technical, architectural, and energy viability of solar thermal collectors made with ceramic materials and their suitability for domestic hot water (DHW) and building heating systems in the Mediterranean climate. The proposal is for the design of a ceramic shell, formed by collector and non-collecting panels, which forms part of the building system itself, and is capable of responding to the basic requirements of a building envelope and harnessing solar energy. Ceramics considerably reduce the final cost of the collector system and offer the new system a variety of compositional and chromatic finishes, occupying the entire building surface and achieving a high degree of architectural integration, although less energy-efficient compared to a conventional metallic collector.

scholarly journals BIM and BEM Methodologies Integration in Energy-Efficient Buildings Using Experimental Design

Buildings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 491
Author(s):  
Jorge González ◽  
Carlos Alberto Pereira Soares ◽  
Mohammad Najjar ◽  
Assed N. Haddad
Keyword(s):  
Experimental Design ◽  
Energy Efficient ◽  
Thermal Characteristics ◽  
Energy Performance ◽  
Building Envelope ◽  
Climatic Zones ◽  
Energy Efficient Buildings ◽  
Energy Modelling ◽  
Building Information ◽  
Energetic Performance

Linking Building Information Modelling and Building Energy Modelling methodologies appear as a tool for the energy performance analysis of a dwelling, being able to build the physical model via Autodesk Revit and simulating the energy modeling with its complement Autodesk Insight. A residential two-story house was evaluated in five different locations within distinct climatic zones to reduce its electricity demand. Experimental Design is used as a methodological tool to define the possible arrangement of results emitted via Autodesk Insight that exhibits the minor electric demand, considering three variables: Lighting efficiency, Plug-Load Efficiency, and HVAC systems. The analysis concluded that while the higher the efficiency of lighting and applications, the lower the electric demand. In addition, the type of climate and thermal characteristics of the materials that conform to the building envelope have significant effects on the energetic performance. The adjustment of different energetic measures and its comparison with other climatic zones enable decision-makers to choose the best combination of variables for developing strategies to lower the electric demand towards energy-efficient buildings.

Sign in / Sign up

Export Citation Format

Share Document