scholarly journals On the Scope of Lagrangian Vortex Methods for Two-Dimensional Flow Simulations and the POD Technique Application for Data Storing and Analyzing

Entropy ◽  
2021 ◽  
Vol 23 (1) ◽  
pp. 118
Author(s):  
Kseniia Kuzmina ◽  
Ilia Marchevsky ◽  
Irina Soldatova ◽  
Yulia Izmailova
Keyword(s):  
Flow Simulation ◽  
Internal Flow ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Vortex Methods ◽  
Flow Simulations ◽  
Additional Information ◽  
Two Dimensional Flow ◽  
Different Shapes ◽  
Problem Formulations

The possibilities of applying the pure Lagrangian vortex methods of computational fluid dynamics to viscous incompressible flow simulations are considered in relation to various problem formulations. The modification of vortex methods—the Viscous Vortex Domain method—is used which is implemented in the VM2D code developed by the authors. Problems of flow simulation around airfoils with different shapes at various Reynolds numbers are considered: the Blasius problem, the flow around circular cylinders at different Reynolds numbers, the flow around a wing airfoil at the Reynolds numbers 104 and 105, the flow around two closely spaced circular cylinders and the flow around rectangular airfoils with a different chord to the thickness ratio. In addition, the problem of the internal flow modeling in the channel with a backward-facing step is considered. To store the results of the calculations, the POD technique is used, which, in addition, allows one to investigate the structure of the flow and obtain some additional information about the properties of flow regimes.

Supercritical Reynolds number simulation for two-dimensional flow over circular cylinders

1975 ◽  
Vol 70 (3) ◽  
pp. 529-542 ◽  
Author(s):  
Edmond Szechenyi
Keyword(s):  
Surface Roughness ◽  
Reynolds Number ◽  
Reynolds Numbers ◽  
Practical Significance ◽  
Circular Cylinders ◽  
Wind Tunnels ◽  
Bluff Bodies ◽  
Wide Range ◽  
Two Dimensional Flow ◽  
Different Diameters

In wind-tunnel tests on bluff bodies the Reynolds number is often limited to values that are very much smaller than those of the flows being simulated. In such cases the experiments may have no practical significance whatsoever since both the fluctuating and the steady aerodynamic phenomena can vary considerably with Reynolds number.This difficulty was encountered in an investigation of supercritical incompressible flow over cylinders, and an attempt at artificially increasing the Reynolds number by means of surface roughness was made. In order to evaluate this simulation technique, the influence of various grades of surface roughness on the aerodynamic forces acting on cylinders of different diameters was studied over a wide range of Reynolds numbers in two very different wind tunnels. The results allow very positive conclusions to be drawn.

Computer Methods for Simulation of Multidimensional, Nonlinear, Subsonic, Incompressible Flow

1972 ◽  
Vol 94 (4) ◽  
pp. 337-346 ◽  
Author(s):  
Douglas G. Fox ◽  
J. W. Deardorff
Keyword(s):  
Reynolds Numbers ◽  
Conditional Stability ◽  
Flow Simulations ◽  
Computer Methods ◽  
Current State ◽  
Wide Range ◽  
Dependent Variables ◽  
Two Dimensional Flow ◽  
High Reynolds ◽  
Types Of Information

This review attempts to summarize the current state of fluid flow simulations with particular regard to numerical discretization techniques, treatment of large Reynolds numbers, and past and future accomplishments of the simulation methodology. Three alternative mathematical representations of the flow are presented and compared for an idealized two-dimensional flow, namely, use of the velocity and pressure as dependent variables (primitive equation), use of vorticity and stream function as dependent variables, and expansion of either of these in a truncated set of orthogonal eigenfunctions of the boundary-value problem (whose coefficients become the dependent variables). Various classes of finite-difference algorithms are discussed with regard to their conditional stability as well as their ability to preserve invariants of the continuous equations. Methods of removing aliasing of high-frequency solutions are discussed. Parameterization and other techniques for dealing with the high-Reynolds-number regime in which solutions exhibit a wide range of scales are considered in depth. We conclude that certain types of information can be better obtained by numerical simulation than by other techniques.

Low Reynolds number flow around and heat transfer from a heated circular cylinder

2010 ◽  
Vol 1 (1-2) ◽  
pp. 15-20 ◽  
Author(s):  
B. Bolló
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Lift Coefficient ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Reynolds Number Flow ◽  
Two Dimensional Flow ◽  
Number Flow ◽  
Low Reynolds ◽  
Increasing Temperature

Abstract The two-dimensional flow around a stationary heated circular cylinder at low Reynolds numbers of 50 < Re < 210 is investigated numerically using the FLUENT commercial software package. The dimensionless vortex shedding frequency (St) reduces with increasing temperature at a given Reynolds number. The effective temperature concept was used and St-Re data were successfully transformed to the St-Reeff curve. Comparisons include root-mean-square values of the lift coefficient and Nusselt number. The results agree well with available data in the literature.

Hybrid RANS-LES Periodic Hill Flow Simulations up to Extreme Reynolds Numbers

2021 ◽  
Author(s):  
Stefan Heinz ◽  
Reza Mokhtarpoor ◽  
Michael K. Stoellinger
Keyword(s):  
Reynolds Numbers ◽  
Flow Simulations

scholarly journals Aerodynamics of smooth and rough square-section prisms at incidence in very high Reynolds-number cross-flows

2021 ◽  
Vol 62 (3) ◽  
Author(s):  
Nils Paul van Hinsberg
Keyword(s):  
Reynolds Number ◽  
Cross Sections ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Surface Boundary ◽  
Experimental Proof ◽  
Surface Boundary Layer ◽  
Pitch Moment ◽  
The Mean ◽  
High Reynolds

Abstract The aerodynamics of smooth and slightly rough prisms with square cross-sections and sharp edges is investigated through wind tunnel experiments. Mean and fluctuating forces, the mean pitch moment, Strouhal numbers, the mean surface pressures and the mean wake profiles in the mid-span cross-section of the prism are recorded simultaneously for Reynolds numbers between 1$$\times$$ × 10$$^{5}$$ 5 $$\le$$ ≤ Re$$_{D}$$ D $$\le$$ ≤ 1$$\times$$ × 10$$^{7}$$ 7 . For the smooth prism with $$k_s$$ k s /D = 4$$\times$$ × 10$$^{-5}$$ - 5 , tests were performed at three angles of incidence, i.e. $$\alpha$$ α = 0$$^{\circ }$$ ∘ , −22.5$$^{\circ }$$ ∘ and −45$$^{\circ }$$ ∘ , whereas only both “symmetric” angles were studied for its slightly rough counterpart with $$k_s$$ k s /D = 1$$\times$$ × 10$$^{-3}$$ - 3 . First-time experimental proof is given that, within the accuracy of the data, no significant variation with Reynolds number occurs for all mean and fluctuating aerodynamic coefficients of smooth square prisms up to Reynolds numbers as high as $$\mathcal {O}$$ O (10$$^{7}$$ 7 ). This Reynolds-number independent behaviour applies to the Strouhal number and the wake profile as well. In contrast to what is known from square prisms with rounded edges and circular cylinders, an increase in surface roughness height by a factor 25 on the current sharp-edged square prism does not lead to any notable effects on the surface boundary layer and thus on the prism’s aerodynamics. For both prisms, distinct changes in the aerostatics between the various angles of incidence are seen to take place though. Graphic abstract

Numerical Simulation for Flow over Two Circular Cylinders in Micro Channel with Lattice Boltzmann Method

2014 ◽  
Vol 670-671 ◽  
pp. 747-750
Author(s):  
Zhi Jun Gong ◽  
Jiao Yang ◽  
Wen Fei Wu
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Recirculation Zone ◽  
Flow Characteristics ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Micro Channel ◽  
Zone Length ◽  
Spacing Ratio ◽  
Boltzmann Method

For indepth study on flow characteristics for fluid bypass obstacles in micro-channel, the Lattice Boltzmann Method (LBM) was used to simulate fluid flow over two circular cylinders in side-by-side arrangement of a micro-channel. The velocity distribution and recirculation zone length under different Reynolds numbers (Re = 0~100) and different spacing ratio (H/D= 0~2.0) were obtained. The results show that the pattern of flow and the size of recirculation zone in the micro-channel depend on the combined effect of Re and H/D.

Sign in / Sign up

Export Citation Format

Share Document