scholarly journals Thermal Management and Modeling of Forced Convection and Entropy Generation in a Vented Cavity by Simultaneous Use of a Curved Porous Layer and Magnetic Field

Entropy ◽  
2021 ◽  
Vol 23 (2) ◽  
pp. 152
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Öztop
Keyword(s):  
Magnetic Field ◽  
Thermal Management ◽  
Porous Layer ◽  
Entropy Generation ◽  
Vertical Wall ◽  
Hybrid Nanofluid ◽  
Layer Height ◽  
Vortex Size ◽  
Region 10 ◽  
Volume Method

The effects of using a partly curved porous layer on the thermal management and entropy generation features are studied in a ventilated cavity filled with hybrid nanofluid under the effects of inclined magnetic field by using finite volume method. This study is performed for the range of pertinent parameters of Reynolds number (100≤Re≤1000), magnetic field strength (0≤Ha≤80), permeability of porous region (10−4≤Da≤5×10−2), porous layer height (0.15H≤tp≤0.45H), porous layer position (0.25H≤yp≤0.45H), and curvature size (0≤b≤0.3H). The magnetic field reduces the vortex size, while the average Nusselt number of hot walls increases for Ha number above 20 and highest enhancement is 47% for left vertical wall. The variation in the average Nu with permeability of the layer is about 12.5% and 21% for left and right vertical walls, respectively, while these amounts are 12.5% and 32.5% when the location of the porous layer changes. The entropy generation increases with Hartmann number above 20, while there is 22% increase in the entropy generation for the case at the highest magnetic field. The porous layer height reduced the entropy generation for domain above it and it give the highest contribution to the overall entropy generation. When location of the curved porous layer is varied, the highest variation of entropy generation is attained for the domain below it while the lowest value is obtained at yp=0.3H. When the size of elliptic curvature is varied, the overall entropy generation decreases from b = 0 to b=0.2H by about 10% and then increases by 5% from b=0.2H to b=0.3H.

Combined Marangoni and buoyancy convection in a porous annular cavity filled with Ag-MgO/water hybrid nanofluid

2021 ◽  
Vol 17 ◽  
Author(s):  
B. Kanimozhi ◽  
M. Muthtamilselvan ◽  
Qasem M. Al-Mdallal ◽  
Bahaaeldin Abdalla
Keyword(s):  
Magnetic Field ◽  
Stokes Equations ◽  
Volume Fraction ◽  
Axial Magnetic Field ◽  
Vertical Wall ◽  
Navier Stokes ◽  
Hybrid Nanofluid ◽  
Radial Magnetic Field ◽  
Navier Stokes Equations ◽  
Buoyancy Convection

Background: This article numerically examines the effect of buoyancy and Marangoni convection in a porous enclosure formed by two concentric cylinders filled with Ag-MgO water hybrid nanofluid. The inner wall of the cavity is maintained at a hot temperature and the outer vertical wall is considered to be cold. The adiabatic condition is assumed for other two boundaries. The effect of magnetic field is considered in radial and axial directions. The Brinkman-extended Darcy model has been adopted in the governing equations. Methods: The finite difference scheme is employed to work out the governing Navier-Stokes equations. The numerically simulated outputs are deliberated in terms of isotherms, streamlines, velocityand average Nusselt number profiles for numerous governing parameters. Results: Except for a greater magnitude of axial magnetic field, our results suggest that the rate of thermal transport accelerates as the nanoparticle volume fraction grows.Also, it is observed that there is an escalation in the profile of average Nusselt numberwith an enhancement in Marangoni number. Conclusion: Furthermore, the suppression of heat and fluid flow in the tall annulus is mainly due to the radial magnetic field whereas in shallow annulus, the axial magnetic field profoundly affects the flow field and thermal transfer.

scholarly journals Effect of Straight, Inclined and Curved Fins on Natural Convection and Entropy Generation of a Nanofluid in a Square Cavity Influenced by a Magnetic Field

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1339
Author(s):  
Yacine Khetib ◽  
Ahmad Aziz Alahmadi ◽  
Ali Alzaed ◽  
Hamidreza Azimy ◽  
Mohsen Sharifpur ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Entropy Generation ◽  
Transfer Rate ◽  
Simple Algorithm ◽  
Square Cavity ◽  
Maximum Heat ◽  
Maximum Heat Transfer ◽  
Volume Method

In this paper, the free convective heat transfer of nanofluids in a square cavity is simulated using a numerical method. The angle of the cavity could be changed in the horizontal axis from 0 to 90 degrees. The cavity is exposed under a constant magnetic field. Two opposite walls of the cavity are cold and warm, and the rest of the walls are insulated. On the hot wall, there are two fins with the same wall temperature. The equations were discretized by the finite volume method (FVM) and then solved using the SIMPLE algorithm. Three different fin configurations (straight, inclined and curved) were studied in terms of heat transfer rate and generation of entropy. According to the simulation results, the heat transfer rate was improved by tilting the fins toward the top or bottom of the cavity. At Ra = 105 and Ha = 20, the maximum heat transfer rate was achieved at a cavity inclination of 90° and 45°, respectively, for straight and curved fins. In the horizontal cavity, heat transfer rate could be improved up to 6.4% by tilting the fins and up to 4.9% by warping them. Increasing the Hartmann number from 0 to 40 reduced the Nusselt number and entropy generation by 37.9% and 33.8%, respectively.

scholarly journals Entropy generation of MHD flow of sodium alginate (C6H9NAO7) fluid in thermal engineering

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
T. N. Abdelhameed
Keyword(s):  
Magnetic Field ◽  
Sodium Alginate ◽  
Entropy Generation ◽  
Vertical Wall ◽  
Mhd Flow ◽  
Analytical Form ◽  
Thermal Engineering ◽  
Bejan Number ◽  
Physical Conditions ◽  
Porosity Effect

AbstractIn this paper, impacts of magnetic field and porosity on the entropy generation of sodium-alginate (C6H9NaO7) fluid are studied. C6H9NaO7 is taken over a moving and heated vertical wall. Heat transfer is due to free convection. Initially, the problem is formulated in the form of PDEs along with physical conditions and then written in non-dimensional form. Problem is solved via Laplace transform and expression in analytical form is established for temperature and velocity field. The related relations for entropy generation and Bejan number and entropy generation are also examined. Nusselt number and Skin-friction are calculated and plotted in graphs. For numerical computations, a finite difference scheme is used using MATLAB software. The results in tables and graphs are discussed for embedded parameters. It is found that the magnetic field and porosity have strong influence on velocity, entropy generation and Bejan number. For greater Hartman number, entropy generation magnitude is greater compared to the Bejan number, conversely, this variation in Bejan number is more efficient. The porosity effect showed that if the medium is more porous, the entropy generation can decreases 50% when porosity increase from Ka = 1 to Ka = 2, however the Bejan number increases.

Thermal performance analysis of hybrid nanofluid natural convection in a square cavity containing an elliptical obstacle under variable magnetic field

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Soufien Belhaj ◽  
Brahim Ben-Beya
Keyword(s):  
Magnetic Field ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Entropy Generation ◽  
Thermal Performance ◽  
Field Variable ◽  
Variable Magnetic Field ◽  
Hybrid Nanofluid ◽  
Square Cavity ◽  
Content Type

Purpose This study aims to analyze entropy generation and magnetohydrodynamic (MHD) natural convection of hybrid nanofluid in a square cavity, with a heated elliptical block placed at the center, in presence of a periodic-variable magnetic field. Design/methodology/approach In this paper, simulations were performed with a FORTRAN home code. The numerical methodology used to solve Navier–Stokes, energy and entropy generation equations with corresponding boundary conditions, is essentially based on the finite volume method and full multigrid acceleration. Findings The cavity is filled with Ag–Tio2/Water hybrid nanofluid. The main objective of this investigation is to predict the effects of body’s size (6 cases), type of applied magnetic field (variable or uniform), the non-dimensional period number of the variable magnetic field (VMF) (0.2 ≤ Λ ≤ 0.8), the inclination angle of the VMF (0 ≤ χ ≤ 90), Rayleigh number (5 × 103 ≤ Ra ≥ 105) and Hartmann number (5 ≤ Ha ≥ 100) on thermal performance, heat transfer rate, entropy generation and flow patterns. Originality/value To the authors’ best knowledge, this paper is the first numerical investigation deals with the entropy generation and natural convection of hybrid nanofluid in a two-dimensional cavity, with specific thermal boundary conditions, containing an elliptical block under periodic-variable magnetic field. Different combinations between flow-governing parameters were made to find optimal thermal performance.

Entropy generation analysis during MHD natural convection flow of hybrid nanofluid in a square cavity containing a corrugated conducting block

2019 ◽  
Vol 30 (3) ◽  
pp. 1115-1136 ◽  
Author(s):  
Tahar Tayebi ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Entropy Generation ◽  
Thermal Conductivity Ratio ◽  
Hybrid Nanofluid ◽  
Conductivity Ratio ◽  
Square Cavity ◽  
Content Type ◽  
Solid Block

Purpose The purpose of this paper is to study the influence of magnetic field on entropy generation and natural convection inside an enclosure filled with a hybrid nanofluid and having a conducting wavy solid block. Also, the effect of fluid–solid thermal conductivity ratio is investigated. Design/methodology/approach The governing equations that are formulated in the dimensionless form are discretized via finite volume method. The velocity–pressure coupling is assured by the SIMPLE algorithm. Heat transfer balance is used to verify the convergence. The validation of the numerical results was performed by comparing qualitatively and quantitatively the results with previously published investigations. Findings The results indicate that the magnetic field and the conductivity ratio of the wavy solid block can significantly affect the dynamic and thermal field and, consequently, the heat transfer rate and entropy generation because of heat transfer, fluid friction and magnetic force. Originality/value To the best of the authors’ knowledge, the present numerical study is the first attempt to use hybrid nanofluid for studying the entropy generation because of magnetohydrodynamic natural convective flow in a square cavity with the presence of a wavy circular conductive cylinder. Irreversibilities due to magnetic effect are taken into account. The effect of fluid–solid thermal conductivity ratio is considered.

Sign in / Sign up

Export Citation Format

Share Document