scholarly journals Downlink Spectral Efficiency Analysis in Distributed Massive MIMO with Phase Noise

Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 317 ◽  
Author(s):  
Qian Lv ◽  
Jiamin Li ◽  
Pengcheng Zhu ◽  
Dongming Wang ◽  
Xiaohu You
Keyword(s):  
Phase Noise ◽  
Spectral Efficiency ◽  
Massive Mimo ◽  
Large Scale ◽  
Channel Model ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Small Scale ◽  
Multiple Input ◽  
Input Multiple Output

To achieve the advantages provided by massive multiple-input multiple-output (MIMO), a large number of antennas need to be deployed at the base station. However, for the reason of cost, inexpensive hardwares are employed in the realistic scenario, which makes the system distorted by hardware impairments. Hence, in this paper, we analyze the downlink spectral efficiency in distributed massive MIMO with phase noise and amplified thermal noise. We provide an effective channel model considering large-scale fading, small-scale fast fading and phase noise. Based on the model, the estimated channel state information (CSI) is obtained during the pilot phase. Under the imperfect CSI, the closed-form expressions of downlink achievable rates with maximum ratio transmission (MRT) and zero-forcing (ZF) precoders in distributed massive MIMO are derived. Furthermore, we also give the user ultimate achievable rates when the number of antennas tends to infinity with both precoders. Based on these expressions, we analyze the impacts of phase noise on the spectral efficiency. It can be concluded that the same limit rate is achieved with both precoders when phase noise is present, and phase noise limits the spectral efficiency. Numerical results show that ZF outdoes MRT precoder in spectral efficiency and ZF precoder is more affected by phase noise.

scholarly journals Deep Learning Based Analog Beamforming Design for Millimetre Wave Massive MIMO System

2021 ◽  
Author(s):  
Rajdeep Singh Sohal ◽  
Vinit Grewal ◽  
Jaipreet Kaur ◽  
Maninder Lal Singh
Keyword(s):  
Deep Learning ◽  
Massive Mimo ◽  
Large Scale ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Design Procedure ◽  
Base Station ◽  
Small Scale ◽  
Millimetre Wave ◽  
Input Multiple Output

Abstract Analog beamforming (ABF) architectures for both large-scale antennas at base station (BS) and small-scale antennas at user side in millimetre wave (mmWave) channel are constructed and investigated in this paper with the aid of deep learning (DL) techniques. Transmit and receive beamformers are selected through offline training of ABF network that accepts input as channel. The joint optimization of both beamformers based on DL for maximization of spectral efficiency (SE) for massive multiple input multiple output (M-MIMO) system has been employed. This design procedure is carried out under imperfect channel state information (CSI) conditions and the proposed design of precoders and combiners shows robustness to imperfect CSI. The simulation results verify the superiority in terms of SE of deep neutral network (DNN) enabled beamforming (BF) design of mmWave massive MIMO system compared with the conventional BF algorithms while lessening the computational complexity.

A companding approach for PAPR suppression in OFDM based massive MIMO system

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajay Kumar Yadav ◽  
Pritam Keshari Sahoo ◽  
Yogendra Kumar Prajapati
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Average Power ◽  
Base Station ◽  
Convex Optimization Problem ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm

Abstract Orthogonal frequency division multiplexing (OFDM) based massive multiuser (MU) multiple input multiple output (MIMO) system is popularly known as high peak-to-average power ratio (PAPR) issue. The OFDM-based massive MIMO system exhibits large number of antennas at Base Station (BS) due to the use of large number of high-power amplifiers (HPA). High PAPR causes HPAs to work in a nonlinear region, and hardware cost of nonlinear HPAs are very high and also power inefficient. Hence, to tackle this problem, this manuscript suggests a novel scheme based on the joint MU precoding and PAPR minimization (PP) expressed as a convex optimization problem solved by steepest gradient descent (GD) with μ-law companding approach. Therefore, we develop a new scheme mentioned to as MU-PP-GDs with μ-law companding to minimize PAPR by compressing and enlarging of massive MIMO OFDM signals simultaneously. At CCDF = 10−3, the proposed scheme (MU-PP-GDs with μ-law companding for Iterations = 100) minimizes the PAPR to 3.70 dB which is better than that of MU-PP-GDs, (iteration = 100) as shown in simulation results.

scholarly journals Deep Scanning—Beam Selection Based on Deep Reinforcement Learning in Massive MIMO Wireless Communication System

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1844
Author(s):  
Minhoe Kim ◽  
Woongsup Lee ◽  
Dong-Ho Cho
Keyword(s):  
Communication Systems ◽  
Large Scale ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Q Learning ◽  
Multiple Input ◽  
Beam Selection ◽  
Input Multiple Output ◽  
Optimal Beam ◽  
Resource Allocation Scheme

In this paper, we investigate a deep learning based resource allocation scheme for massive multiple-input-multiple-output (MIMO) communication systems, where a base station (BS) with a large scale antenna array communicates with a user equipment (UE) using beamforming. In particular, we propose Deep Scanning, in which a near-optimal beamforming vector can be found based on deep Q-learning. Through simulations, we confirm that the optimal beam vector can be found with a high probability. We also show that the complexity required to find the optimum beam vector can be reduced significantly in comparison with conventional beam search schemes.

scholarly journals An Evaluation of Successive Pilot Decontamination in Massive MIMO

2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão
Keyword(s):  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Pilot Training ◽  
Pilot Contamination ◽  
Fundamental Issue ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.

scholarly journals Spectral Efficiency Improvement Techniques In Massive Mimo For 5G Communications

2021 ◽  
Vol 12 (2) ◽  
pp. 1457-1465
Author(s):  
Naraiah R , Et. al.
Keyword(s):  
Spectral Efficiency ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Broad Band ◽  
Cell System ◽  
Base Station ◽  
Information Rate ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Long Time

Wireless communications has gotten one of the quickest developing zones in our advanced life and makes colossal effect on practically every component of our day by day life. 5G should support a large number of new applications with a wide assortment of prerequisites, including higher pinnacle and client information rates, diminished dormancy, improved indoor inclusion, expanded number of gadgets, etc. The normal traffic development in at least a long time from now can be fulfilled by the consolidated utilization of more range, higher spectral efficiency, and densification of cells. The increment in spectral effectiveness will improve the throughput of the system which straightforwardly serves the Enhanced Mobile Broad band use instance of the 5G assistance. In massive Multiple-Input Multiple-Output (M-MIMO) systems few hundred quantities of antennas are conveyed at each base station (BS) to serve a moderately modest number of single-reception apparatus terminals with multiuser, giving higher information rate and lower idleness. Massive Multiple-Input Multiple-Output is the arising innovation in cell system for higher information rate correspondence. It utilizes enormous number of communicating reception apparatus at the base station which is made conceivable by the radio wire cluster which can be electronically steerable and adequately utilized for shaft framing. Spectral proficiency is the vital boundary to be improved in expanding throughput. The system execution under different commonsense limitations and conditions, for example, restricted soundness block length, number of base station (BS) antennas, and number of dynamic clients are assessed through simulation.  

A Review of Massive Multiple Input Multiple Output for 5G Communication: Benefits and Challenges

2020 ◽  
Vol 1 (1) ◽  
pp. 22-26
Author(s):  
Shaik Nilofer ◽  
Keyword(s):  
Wireless Communication ◽  
Channel Capacity ◽  
Massive Mimo ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
System Model ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Primary Advantage ◽  
Time Division

Massive MIMO (mMIMO) systems become a primary advantage to overcome the problem of bandwidth restrictions. It improves the channel capacity of remote systems.The paper reviews about mMIMO systems. mMIMO consists of several number of antennas at base station (BS) which improves spectrum efficacy. The extra benefit of the mMIMO system is that the components cost is low because of utilization of less power components. The paper also discusses about the channel estimation at the BS and generally time division mode (TDD) is assumed for mMIMO systems. The paper also discusses system model, benefits for 5G wireless communication and its challenges.

scholarly journals Performance enhancement of maximum ratio transmission in 5G system with multi-user multiple-input multiple-output

2022 ◽  
Vol 12 (2) ◽  
pp. 1650
Author(s):  
Sarmad K. Ibrahim ◽  
Saif A. Abdulhussien
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Performance Enhancement ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Standard System ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Ratio Transmission ◽  
Maximum Ratio Transmission

<span>The downlink multi-user precoding of the multiple-input multiple-output (MIMO) method includes optimal channel state information at the base station and a variety of linear precoding (LP) schemes. Maximum ratio transmission (MRT) is among the common precoding schemes but does not provide good performance with massive MIMO, such as high bit error rate (BER) and low throughput. The orthogonal frequency division multiplexing (OFDM) and precoding schemes used in 5G have a flaw in high-speed environments. Given that the Doppler effect induces frequency changes, orthogonality between OFDM subcarriers is disrupted and their throughput output is decreased and BER is decreased. This study focuses on solving this problem by improving the performance of a 5G system with MRT, specifically by using a new design that includes weighted overlap and add (WOLA) with MRT. The current research also compares the standard system MRT with OFDM with the proposed design (WOLA-MRT) to find the best performance on throughput and BER. Improved system results show outstanding performance enhancement over a standard system, and numerous improvements with massive MIMO, such as best BER and throughput. Its approximately 60% more throughput than the traditional systems. Lastly, the proposed system improves BER by approximately 2% compared with the traditional system.</span>

scholarly journals Capacity Analysis and Linear Detection in Massive MIMO for 5G Wireless Systems

2019 ◽  
Vol 8 (9) ◽  
pp. 2938-2943
Keyword(s):  
Massive Mimo ◽  
Multiple Input Multiple Output ◽  
Symbol Error Rate ◽  
Base Station ◽  
Matlab Simulation ◽  
Maximum Ratio Combining ◽  
Single Antenna ◽  
Air Interface ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) is an attractive air interface solution which is used in the 4 th generation wireless networks to achieve higher data rate. With a very large antenna array in Massive MIMO the capacity will increase drastically. In this paper channel capacity comparison for MIMO using known Channel State Information (CSI) and unknown CSI has been carried out for a higher number of antennas at transmitter and receiver side. It has shown that at lower SNR known CSI will give better performance compared to unknown CSI. At higher SNR known CSI and unknown CSI will provide similar results. Capacity comparison has been evaluated with help of MATLAB for known CSI and unknown CSI from a small number of antennas to hundred of antennas. Also, the performance evaluated with MATLAB simulation of linear detectors zero-forcing (ZF) and maximum ratio combining (MRC) method for large number of antennas at Base station (BS) which are serving a small number of single antenna users. Performance is evaluated in terms of Symbol Error Rate (SER) for ZF and MRC, and results show that ZF will outperform MRC. It has also been analyzed that increasing the antennas at BS for a small number of users will also help to reduce SER.

A Review of Massive Multiple Input Multiple Output for 5G Communication: Benefits and Challenges

2020 ◽  
Vol 1 (1) ◽  
pp. 22-26
Author(s):  
Shaik Nilofer
Keyword(s):  
Wireless Communication ◽  
Channel Capacity ◽  
Massive Mimo ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
System Model ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Primary Advantage ◽  
Time Division

Massive MIMO (mMIMO) systems become a primary advantage to overcome the problem of bandwidth restrictions. It improves the channel capacity of remote systems.The paper reviews about mMIMO systems. mMIMO consists of several number of antennas at base station (BS) which improves spectrum efficacy. The extra benefit of the mMIMO system is that the components cost is low because of utilization of less power components. The paper also discusses about the channel estimation at the BS and generally time division mode (TDD) is assumed for mMIMO systems. The paper also discusses system model, benefits for 5G wireless communication and its challenges.

scholarly journals Limited Feedback Precoding for Massive MIMO

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Xin Su ◽  
Jie Zeng ◽  
Jingyu Li ◽  
Liping Rong ◽  
Lili Liu ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Large Scale ◽  
Multiple Input Multiple Output ◽  
Limited Feedback ◽  
Antenna System ◽  
Base Station ◽  
Array Antenna ◽  
Codebook Design ◽  
Input Multiple Output ◽  
Scenarios Simulation

The large-scale array antenna system with numerous low-power antennas deployed at the base station, also known as massive multiple-input multiple-output (MIMO), can provide a plethora of advantages over the classical array antenna system. Precoding is important to exploit massive MIMO performance, and codebook design is crucial due to the limited feedback channel. In this paper, we propose a new avenue of codebook design based on a Kronecker-type approximation of the array correlation structure for the uniform rectangular antenna array, which is preferable for the antenna deployment of massive MIMO. Although the feedback overhead is quite limited, the codebook design can provide an effective solution to support multiple users in different scenarios. Simulation results demonstrate that our proposed codebook outperforms the previously known codebooks remarkably.

Sign in / Sign up

Export Citation Format

Share Document