scholarly journals Focusing of Ultrahigh Resolution Spaceborne Spotlight SAR on Curved Orbit

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 628 ◽  
Author(s):  
Yulei Qian ◽  
Daiyin Zhu

Aiming to acquire ultrahigh resolution images, algorithms for spaceborne spotlight synthetic aperture radar (SAR) imaging typically confront challenges of curved orbit and azimuth spectral aliasing. In order to conquer these difficulties, a method is proposed in this paper to obtain ultrahigh resolution spaceborne SAR images on a curved orbit, which is composed of the modified RMA (Range Migration Algorithm) and the modified deramping-based approach. The modified RMA is developed to deal with the effect introduced by a curved orbit and the modified deramping-based approach is utilized to handle the problem of azimuth spectral aliasing. In the modified RMA, the polynomial expression of SAR two-dimensional spectrum on a curved orbit is derived with fourth-order azimuth phase history model and series reversion. Then, the singular value decomposition (SVD) is applied to decompose the expression of SAR two-dimensional spectrum numerically in order to acquire coordinates for Stolt interpolation in the scenario of curved orbit. In addition, the modified deramping-based approach is derived by introducing orbital state vectors in order to accommodate the situation of curved orbit in the proposed method. Experiments are implemented on point target simulation in order to verify the effectiveness of the presented method. In experiments, the range and azimuth resolution can achieve 0.15 m and 0.14 m, with focused scene size of 3 km by 3 km.


2021 ◽  
Vol 13 (18) ◽  
pp. 3733
Author(s):  
Hoonyol Lee ◽  
Jihyun Moon

Ground-based synthetic aperture radar (GB-SAR) is a useful tool to simulate advanced SAR systems with its flexibility on RF system and SAR configuration. This paper reports an indoor experiment of bistatic/multistatic GB-SAR operated in Ku-band with two antennae: one antenna was stationary on the ground and the other was moving along a linear rail. Multiple bistatic GB-SAR images were taken with various stationary antenna positions, and then averaged to simulate a multistatic GB-SAR configuration composed of a moving Tx antenna along a rail and multiple stationary Rx antennae with various viewing angles. This configuration simulates the use of a spaceborne/airborne SAR system as a transmitting antenna and multiple ground-based stationary antennae as receiving antennae to obtain omni-directional scattering images. This SAR geometry with one-stationary and one-moving antennae configuration was analyzed and a time-domain SAR focusing algorithm was adjusted to this geometry. Being stationary for one antenna, the Doppler rate was analyzed to be half of the monostatic case, and the azimuth resolution was doubled. Image quality was enhanced by identifying and reducing azimuth ambiguity. By averaging multiple bistatic images from various stationary antenna positions, a multistatic GB-SAR image was achieved to have better image swath and reduced speckle noise.





2021 ◽  
Vol 13 (14) ◽  
pp. 2807
Author(s):  
Xuyao Tong ◽  
Min Bao ◽  
Guangcai Sun ◽  
Liang Han ◽  
Yu Zhang ◽  
...  

Moving ship refocusing is challenging because the target motion parameters are unknown. Moreover, moving ships in squint synthetic aperture radar (SAR) images obtained by the back-projection (BP) algorithm usually suffer from geometric deformation and spectrum winding. Therefore, a spectrum-orthogonalization algorithm that refocuses moving ships in squint SAR images is presented. First, “squint minimization” is introduced to correct the spectrum by two spectrum compression functions: one to align the spectrum centers and another to translate the inclined spectrum into orthogonalized form. Then, the precise analytic function of the two-dimensional (2D) wavenumber spectrum is derived to obtain the phase error. Finally, motion compensation is performed in the two-dimensional wavenumber domain after the motion parameter is estimated by maximizing the image sharpness. This method has low computational complexity because it lacks interpolation and can be implemented by the inverse fast Fourier translation (IFFT) and fast Fourier translation (FFT). Processing results of simulation experiments and the GaoFen-3 squint SAR data validate the effectiveness of this method.



Author(s):  
Priya R. Kamath ◽  
Kedarnath Senapati ◽  
P. Jidesh

Speckles are inherent to SAR. They hide and undermine several relevant information contained in the SAR images. In this paper, a despeckling algorithm using the shrinkage of two-dimensional discrete orthonormal S-transform (2D-DOST) coefficients in the transform domain along with shock filter is proposed. Also, an attempt has been made as a post-processing step to preserve the edges and other details while removing the speckle. The proposed strategy involves decomposing the SAR image into low and high-frequency components and processing them separately. A shock filter is used to smooth out the small variations in low-frequency components, and the high-frequency components are treated with a shrinkage of 2D-DOST coefficients. The edges, for enhancement, are detected using a ratio-based edge detection algorithm. The proposed method is tested, verified, and compared with some well-known models on C-band and X-band SAR images. A detailed experimental analysis is illustrated.



2019 ◽  
Vol 9 (4) ◽  
pp. 642 ◽  
Author(s):  
Xu Xi ◽  
Xinchang Zhang ◽  
Weidong Liang ◽  
Qinchuan Xin ◽  
Pengcheng Zhang

Digital watermarking is important for the copyright protection of electronic data, but embedding watermarks into vector maps could easily lead to changes in map precision. Zero-watermarking, a method that does not embed watermarks into maps, could avoid altering vector maps but often lack of robustness. This study proposes a dual zero-watermarking scheme that improves watermark robustness for two-dimensional (2D) vector maps. The proposed scheme first extracts the feature vertices and non-feature vertices of the vector map with the Douglas-Peucker algorithm and subsequently constructs the Delaunay Triangulation Mesh (DTM) to form a topological feature sequence of feature vertices as well as the Singular Value Decomposition (SVD) matrix to form intrinsic feature sequence of non-feature vertices. Next, zero-watermarks are obtained by executing exclusive disjunction (XOR) with the encrypted watermark image under the Arnold scramble algorithm. The experimental results show that the scheme that synthesizes both the feature and non-feature information improves the watermark capacity. Making use of complementary information between feature and non-feature vertices considerably improves the overall robustness of the watermarking scheme. The proposed dual zero-watermarking scheme combines the advantages of individual watermarking schemes and is robust against such attacks as geometric attacks, vertex attacks and object attacks.



Sign in / Sign up

Export Citation Format

Share Document