scholarly journals Time Domain Performance of Reconfigurable Filter Antenna for IR-UWB, WLAN, and WiMAX Applications

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 1007
Author(s):  
Zhuohang Zhang ◽  
Zhongming Pan
Keyword(s):  
Time Domain ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Low Cost ◽  
Time Domain Analysis ◽  
Local Area ◽  
Ultra Wideband ◽  
Area Network ◽  
Compact Size ◽  
The Time Domain

A novel reconfigurable filter antenna with three ports for three dependent switchable states for impulse radio-ultrawideband (IR-UWB)/wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) applications is presented in this paper. Three positive-intrinsic-negative diodes, controlled by direct current, are employed to realize frequency reconfiguration of one ultra-wideband state and two narrowband states (2.4 GHz and 3.5 GHz). The time domain characteristic of the proposed antenna in the ultra-wideband state is studied, because of the features of the IR-UWB system. The time domain analysis shows that the reconfigurable filtering antenna in the wideband state performs similarly to the original UWB antenna. The compact size, low cost, and expanded reconfigurable filtering features make it suitable for IR-UWB systems that are integrated with WLAN/WiMAX communications.

Frequency and time domain analysis of a novel UWB antenna with dual band-notched characteristics

2015 ◽  
Vol 9 (2) ◽  
pp. 427-436 ◽  
Author(s):  
Rajarshi Sanyal ◽  
Abhirup Patra ◽  
Parthapratim Sarkar ◽  
Santosh Kumar Chowdhury
Keyword(s):  
Time Domain ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Angular Separation ◽  
Time Domain Analysis ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network

This paper presents the dual band notch characteristics of Ultra wideband (UWB) monopole antenna. Proposed antenna (30 × 30 mm2) consists of arrow shaped patch and truncated ground plane. Operating range of the proposed antenna (voltage standing wave ratio < 2) is 2.2–11 GHz. In order to achieve dual band stop characteristics, λ/2 open ended angularly separated slit pair has been inserted on the radiator for world interoperability for microwave access (WIMAX) (3.3–3.9 GHz) band rejection performance and wireless local area network (WLAN) (5.1–5.9 GHz) band rejection has been realized by introducing a pair of angularly separated λ/2 conductor backed plane (CBP). Using proper adjustment of angular separation for both slit pair and CBP pair, enhanced band rejection can be achieved for the WIMAX and WLAN band, respectively. The performance of antenna has been investigated in terms of frequency domain and time domain to assess its suitability in UWB communication.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

Transient response of dual-band-notched ultra-wideband antenna

2014 ◽  
Vol 7 (1) ◽  
pp. 61-67 ◽  
Author(s):  
Jagannath Malik ◽  
Parth C. Kalaria ◽  
Machavaram V. Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Portable Devices ◽  
Area Network ◽  
Network Systems

In the present study, an ultra-wideband (UWB) antenna has been proposed using coplanar waveguide (CPW) feed with dual-band-notch characteristics. Slot-loaded radiator and U-shaped CPW resonator are used for band rejection at 3.5 and 5–6 GHz respectively to reduce interference with existing World interoperability for microwave access and wireless local area network systems. With an extended operating band (measured at 10 dB return loss) the antenna operates successfully over the entire UWB range (3.1–10.6 GHz) with a form factor of 30 × 20 × 1.524 mm3 on a commercially low-cost FR-4 substrate. Experimental measurement results are presented in support of the simulated results for the proposed antenna for practical application. The antenna has been successfully fabricated and measured, showing broadband matched impedance and good omnidirectional radiation pattern throughout the operating bandwidth. Measured time-domain analysis for both the orientations, i.e. face-to-face and side-by-side, yields excellent performance in the open environment scenario. With fairly good and consistent monopole such as omnidirectional radiation patterns in H-plane and linear transmission responses, the proposed antenna is well suited to be integrated within portable devices.

scholarly journals Design of UWB Monopole Antenna with Dual Notched Bands Using One Modified Electromagnetic-Bandgap Structure

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Hao Liu ◽  
Ziqiang Xu
Keyword(s):  
Simple Structure ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Compact Size

A modified electromagnetic-bandgap (M-EBG) structure and its application to planar monopole ultra-wideband (UWB) antenna are presented. The proposed M-EBG which comprises two strip patch and an edge-located via can perform dual notched bands. By properly designing and placing strip patch near the feedline, the proposed M-EBG not only possesses a simple structure and compact size but also exhibits good band rejection. Moreover, it is easy to tune the dual notched bands by altering the dimensions of the M-EBG. A demonstration antenna with dual band-notched characteristics is designed and fabricated to validate the proposed method. The results show that the proposed antenna can satisfy the requirements of VSWR < 2 over UWB 3.1–10.6 GHz, except for the rejected bands of the world interoperability for microwave access (WiMAX) and the wireless local area network (WLAN) at 3.5 GHz and 5.5 GHz, respectively.

scholarly journals Design and Analysis of a Compact UWB Band Notch Antenna for Wireless Communication

2020 ◽  
Vol 3 (1) ◽  
pp. 6
Author(s):  
Mohammad Monirujjaman Khan
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Wireless Communication Systems ◽  
Area Network ◽  
Compact Size ◽  
Simulation Based

Development and investigation of a miniaturized ultra-wideband band notch antenna is demonstrated in this paper. The antenna was modeled and simulated using Computer Simulation Technology (CST)TM Microwave Studio software. The simulated results of this antenna are presented and analyzed. The performance parameters such as return loss, gain, radiation efficiency, radiation patterns are simulation-based results provided here. The main objective of this paper was to obtain band notch characteristics at the Wireless Local Area Network (5.15–5.8 GHz) and WiMax (5.25–5.85 GHz) in the UWB frequency ranges of 3.1–10.6 GHz in order to avoid interference. Results and analysis show that the antenna meets the objective and shows very good results. It has very compact size as well which is attractive feature of this antenna that will make it suitable for ultra-wideband wireless communication systems.

scholarly journals A Compact Ultra-Wideband Monopole Antenna with Dual Bandstop Characteristics

2013 ◽  
Vol 347-350 ◽  
pp. 1695-1698 ◽  
Author(s):  
Wen Li ◽  
Jun Jun Wang ◽  
Yan Chao Sun ◽  
Xian Chao Meng
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Compact Size

A compact and simple ultra-wideband microstrip-fed planar antenna with double bandstop characteristic is presented. The antenna consists of a rectangular monopole and two W-shaped slots inserted into the radiating patch and the truncated ground plane. By using a W-shaped slot defected ground structure (DGS) in the feedline, a stopband of 800 MHz (from 5.1 to 5.9 GHz) for band rejection of wireless local area network (WLAN) is achieved. To obtain the other stopband (from 3.7-4.4 GHz), a same shaped slot is etched into the monopole. Moreover, the two stopbands can be controlled by adjusting the length of the slot respectively. The simulation results show that the designed antenna, with a compact size of 38.5 mm×42.5 mm, has an impedance bandwidth of 2.811 GHz for voltage standing wave ratio (VSWR) less than 2, besides two frequency stopbands of 3.74.4 GHz and 5.15.9 GHz. Moreover, the main features including omnidirectional H-plane radiation patterns and the appropriate impedance characteristic are achieved by beveling the radiating patch and the microstrip-fed line of the proposed antenna.

Home Networking Technology Applied in Smart Home System

2013 ◽  
Vol 468 ◽  
pp. 141-144
Author(s):  
Su Hua Chen ◽  
Yong Guang Liu ◽  
Xu Fang
Keyword(s):  
Smart Home ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
High Reliability ◽  
Low Cost ◽  
Data Communication ◽  
Local Area ◽  
Area Network ◽  
Home Networking ◽  
The Right

Smart home system mainly consists of home networking, wireless local area network and external network, and with the advantages of low cost and high reliability, Zigbee wireless technology is the right choice for smart home system and the main part of home networking. The design of smart home system based on Zigbee is proposed, the Zigbeethe design process of the systemintelligent socket and data communication rule are elaborated. The system has been applied in smart community of Shaoxing Electric Power Bureau, which has good performances, high availability and reliability, better market prospects.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

CCS: A Railway Corridor Control System Utilizing Ultra Wideband Radio Technology

Joint Rail ◽  
2004 ◽  
Author(s):  
Paul A. Flaherty
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Linear Chain ◽  
Wide Band ◽  
Local Area ◽  
Ultra Wideband ◽  
Area Network ◽  
Radio Technology ◽  
A Chain ◽  
Uwb Radio

Ultra Wide Band (UWB) radio is a unique technology which combines a megabit wireless local area network with a centimeter-resolution radiolocation (RADAR) capability over distances less than 100 meters. A linear chain of UWB nodes can be used to create a hop-by-hop data transmission network, which also forms a RADAR “corridor” along the chain. By co-locating such a chain of nodes along a railroad right-of-way, precise information on the location and velocity of trains could be distributed throughout the corridor. In addition, the radar corridor would detect the introduction of track obstacles such as rocks, people, and automobiles, as well as shifted loads and other high-wide train defects. Finally, the network of nodes would enable off-train communications with payload sensors, locomotive computers, and could also provide wireless connectivity for passenger service.

A multi-slotted antenna for LTE/5G Sub-6 GHz wireless communication applications

2020 ◽  
pp. 1-11
Author(s):  
Rezaul Azim ◽  
AKM Moinul H. Meaze ◽  
Adnan Affandi ◽  
Md Mottahir Alam ◽  
Rumi Aktar ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Area Network ◽  
Operating Band ◽  
Low Profile ◽  
Compact Size ◽  
Capacitive Effect ◽  
5G Communication

Abstract This paper presents a low-profile multi-slotted patch antenna for long term evolution (LTE) and fifth-generation (5G) communication applications. The studied antenna comprised of a stepped patch and a ground plane. To attain the required operating band, three slots have been inserted within the patch. The insertion of the slots enhances the capacitive effect and helps the prototype antenna to achieve an operating band ranging from 3.15 to 5.55 GHz (S11 ≤−10 dB), covering the N77/N78/N79 for sub-6 GHz 5G wireless communications and LTE bands of 22/42/43/46. The wideband antenna presented in this paper offers omnidirectional stable radiation patterns, good gains, and efficiency with a compact size which make this design an ideal contender for wireless fidelity (WiFi), wireless local area network (WLAN), LTE, and sub-6 GHz 5G communication applications.

Sign in / Sign up

Export Citation Format

Share Document