scholarly journals Flexibility Evaluation Method of Power Systems with High Proportion Renewable Energy Based on Typical Operation Scenarios

Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 627
Author(s):  
Xiangying Tang ◽  
Yan Hu ◽  
Zhanpeng Chen ◽  
Guangzeng You
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Supply And Demand ◽  
Flow Distribution ◽  
Occurrence Probability ◽  
Flexible Operation

The development of renewable energy represented by wind, photovoltaic and hydropower has increased the uncertainty of power systems. In order to ensure the flexible operation of power systems with a high proportion of renewable energy, it is necessary to establish a multi-scenario power system flexibility evaluation method. First, this study uses a modified k-means algorithm to cluster operating scenarios of renewable energy and load to obtain several typical scenarios. Then, flexibility evaluation indices are proposed from three perspectives, including supply and demand balance of the zone, power flow distribution of the zone and transmission capacity between zones. Next, to calculate the flexibility evaluation indices of each scenario—and according to the occurrence probability of each scenario—we multiplied the indices of each scenario by the scenario occurrence probability to obtain comprehensive evaluation indices of all scenarios. Based on the actual historical output data of renewable energy and load of a southern power system in China, a flexibility evaluation was performed on the modified IEEE 14 system and modified IEEE 39 system. The results show that the proposed clustering method and flexibility indices can effectively reflect the flexibility status of the power system.

scholarly journals The Flexible Operation of Coal Power and Its Renewable Integration Potential in China

2019 ◽  
Vol 11 (16) ◽  
pp. 4424 ◽  
Author(s):  
Chunning Na ◽  
Huan Pan ◽  
Yuhong Zhu ◽  
Jiahai Yuan ◽  
Lixia Ding ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
Renewable Integration ◽  
Flexible Resources ◽  
Feasible Option ◽  
Coal Power ◽  
Simulation Results ◽  
Flexible Operation

At present time, China’s power systems face significant challenges in integrating large-scale renewable energy and reducing the curtailed renewable energy. In order to avoid the curtailment of renewable energy, the power systems need significant flexibility requirements in China. In regions where coal is still heavily relied upon for generating electricity, the flexible operations of coal power units will be the most feasible option to face these challenges. The study first focused on the reasons why the flexible operation of existing coal power units would potentially promote the integration of renewable energy in China and then reviewed the impacts on the performance levels of the units. A simple flexibility operation model was constructed to estimate the integration potential with the existing coal power units under several different scenarios. This study’s simulation results revealed that the existing retrofitted coal power units could provide flexibility in the promotion of the integration of renewable energy in a certain extent. However, the integration potential increment of 20% of the rated power for the coal power units was found to be lower than that of 30% of the rated power. Therefore, by considering the performance impacts of the coal power units with low performances in load operations, it was considered to not be economical for those units to operate at lower than 30% of the rated power. It was believed that once the capacity share of the renewable energy had achieved a continuously growing trend, the existing coal power units would fail to meet the flexibility requirements. Therefore, it was recommended in this study that other flexible resources should be deployed in the power systems for the purpose of reducing the curtailment of renewable energy. Furthermore, based on this study’s obtained evidence, in order to realize a power system with high proportions of renewable energy, China should strive to establish a power system with adequate flexible resources in the future.

scholarly journals Optimal Sizing and Spatial Allocation of Storage Units in a High-Resolution Power System Model

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3365 ◽  
Author(s):  
Lukas Wienholt ◽  
Ulf Müller ◽  
Julian Bartels
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Power Transmission ◽  
Renewable Generation ◽  
Large Power ◽  
Transmission Grid ◽  
Storage Units

The paradigm shift of large power systems to renewable and decentralized generation raises the question of future transmission and flexibility requirements. In this work, the German power system is brought to focus through a power transmission grid model in a high spatial resolution considering the high voltage (110 kV) level. The fundamental questions of location, type, and size of future storage units are addressed through a linear optimal power flow using today’s power grid capacities and a generation portfolio allowing a 66% generation share of renewable energy. The results of the optimization indicate that for reaching a renewable energy generation share of 53% with this set-up, a few central storage units with a relatively low overall additional storage capacity of around 1.6 GW are required. By adding a constraint of achieving a renewable generation share of at least 66%, storage capacities increase to almost eight times the original capacity. A comparison with the German grid development plan, which provided the basis for the power generation data, showed that despite the non-consideration of transmission grid extension, moderate additional storage capacities lead to a feasible power system. However, the achievement of a comparable renewable generation share provokes a significant investment in additional storage capacities.

scholarly journals A Study on Optimal Power System Reinforcement Measures Following Renewable Energy Expansion

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5929
Author(s):  
Hyuk-Il Kwon ◽  
Yun-Sung Cho ◽  
Sang-Min Choi
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Transmission Lines ◽  
Large Scale ◽  
Supply And Demand ◽  
Electricity Supply ◽  
Static And Dynamic Analysis ◽  
The Future ◽  
Reinforcement Measures

Renewable energy generation capacity in Korea is expected to reach about 63.8 GW by 2030 based on calculations using values from a power plan survey (Korea’s renewable energy power generation project plan implemented in September 2017) and the “3020” implementation plan prescribed in the 8th Basic Plan for Long-Term Electricity Supply and Demand that was announced in 2017. In order for the electrical grid to accommodate this capacity, an appropriate power system reinforcement plan is critical. In this paper, a variety of scenarios are constructed involving renewable energy capacity, interconnection measures and reinforcement measures. Based on these scenarios, the impacts of large-scale renewable energy connections on the future power systems are analyzed and a reinforcement plan is proposed based on the system assessment results. First, the scenarios are categorized according to their renewable energy interconnection capacity and electricity supply and demand, from which a database is established. A dynamic model based on inverter-based resources is applied to the scenarios here. The transmission lines, high-voltage direct current and flexible alternating current transmission systems are reinforced to increase the stability and capabilities of the power systems considered here. Reinforcement measures are derived for each stage of renewable penetration based on static and dynamic analysis processes. As a result, when large-scale renewable energy has penetrated some areas in the future in Korean power systems, the most stable systems could be optimally configured by applying interconnection measure two and reinforcement measure two as described here. To verify the performance of the proposed methodology, in this paper, comprehensive tests are performed based on predicted large-scale power systems in 2026 and 2031. Database creation and simulation are performed semi-automatically here using Power System Simulator for Engineering (PSS/E) and Python.

scholarly journals Evaluation Method for Penetration Limit of Renewable Energy Sources in Korean Power System

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4207
Author(s):  
Han Gwon ◽  
Woo Choi ◽  
Kyung Kook
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Power System ◽  
Evaluation Method ◽  
Frequency Control ◽  
Renewable Energy Sources ◽  
Supply And Demand ◽  
Total Power ◽  
Energy Sources ◽  
Primary Frequency

As Korea aims to increase the extent to which renewable energy sources (RES) account for up to 20% of the total power generated in the country by 2030, the feasibility of this target is a major concern. This concern largely results from the Korean power system possessing unique characteristics, such as its electrical isolation and high density. To achieve the RES target, the reliable operation of the power system must coexist with an increased share of RES power generation. This study proposes a method to evaluate the penetration limit of RES in the Korean power system considering the existing plans for the long-term electricity supply and demand, as well as its operational requirements. The Korea electric power corporation (KEPCO) planning database of the Korean power system for the next 15 years was employed to determine the penetration limit of RES considering the reliability criteria, including the minimum power generation of conventional sources, primary frequency control requirement, 10-min reserve requirement, and frequency stability.

Research on Renewable Energy and its Coordinated Development with Smart Grid

2013 ◽  
Vol 448-453 ◽  
pp. 4239-4243 ◽  
Author(s):  
Xiao Lu Wang ◽  
Hong Cai Dai ◽  
Qiong Hui Li
Keyword(s):  
Renewable Energy ◽  
Smart Grid ◽  
Power Systems ◽  
Smart Grids ◽  
Evaluation System ◽  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Renewable Energies ◽  
Coordinated Development ◽  
Analytic Hierarchy

The modern power systems are typically characterized with renewable energies and smart grids. Their development should be in a coordinated manner. According to the structuring parts of power industry, such as generation, transmission, distribution, consumption and dispatching, this paper constructs a comprehensive evaluation system for renewable energy and smart grid coordinate development in "3 levels, 4 parts, 15 targets; put forward a quantitative evaluation method for coordination level between renewable energies and smart grids in China, using analytic hierarchy process, calculate the coordination level in total and for each part. The paper also presents the key fields and priorities for coordinated development.

scholarly journals Application of Battery Energy Storage Systems for Primary Frequency Control in Power Systems with High Renewable Energy Penetration

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1379
Author(s):  
Md Ruhul Amin ◽  
Michael Negnevitsky ◽  
Evan Franklin ◽  
Kazi Saiful Alam ◽  
Seyed Behzad Naderi
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Storage Systems ◽  
Frequency Control ◽  
Battery Energy Storage ◽  
Battery Energy Storage Systems ◽  
Battery Energy ◽  
Primary Frequency ◽  
Primary Frequency Control

In power systems, high renewable energy penetration generally results in conventional synchronous generators being displaced. Hence, the power system inertia reduces, thus causing a larger frequency deviation when an imbalance between load and generation occurs, and thus potential system instability. The problem associated with this increase in the system’s dynamic response can be addressed by various means, for example, flywheels, supercapacitors, and battery energy storage systems (BESSs). This paper investigates the application of BESSs for primary frequency control in power systems with very high penetration of renewable energy, and consequently, low levels of synchronous generation. By re-creating a major Australian power system separation event and then subsequently simulating the event under low inertia conditions but with BESSs providing frequency support, it has been demonstrated that a droop-controlled BESS can greatly improve frequency response, producing both faster reaction and smaller frequency deviation. Furthermore, it is shown via detailed investigation how factors such as available battery capacity and droop coefficient impact the system frequency response characteristics, providing guidance on how best to mitigate the impact of future synchronous generator retirements. It is intended that this analysis could be beneficial in determining the optimal BESS capacity and droop value to manage the potential frequency stability risks for a future power system with high renewable energy penetrations.

scholarly journals Enhancing Oscillation Damping in an Interconnected Power System with Integrated Wind Farms Using Unified Power Flow Controller

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 322 ◽  
Author(s):  
Ping He ◽  
Seyed Arefifar ◽  
Congshan Li ◽  
Fushuan Wen ◽  
Yuqi Ji ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Time Domain ◽  
Power Flow ◽  
Unified Power Flow Controller ◽  
Time Domain Simulation ◽  
Interconnected Power System ◽  
Dynamic Time ◽  
Oscillation Damping ◽  
Power Flow Controller

The well-developed unified power flow controller (UPFC) has demonstrated its capability in providing voltage support and improving power system stability. The objective of this paper is to demonstrate the capability of the UPFC in mitigating oscillations in a wind farm integrated power system by employing eigenvalue analysis and dynamic time-domain simulation approaches. For this purpose, a power oscillation damping controller (PODC) of the UPFC is designed for damping oscillations caused by disturbances in a given interconnected power system, including the change in tie-line power, the changes of wind power outputs, and others. Simulations are carried out for two sample power systems, i.e., a four-machine system and an eight-machine system, for demonstration. Numerous eigenvalue analysis and dynamic time-domain simulation results confirm that the UPFC equipped with the designed PODC can effectively suppress oscillations of power systems under various disturbance scenarios.

scholarly journals A Methodology for Provision of Frequency Stability in Operation Planning of Low Inertia Power Systems

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 737
Author(s):  
Michał Kosmecki ◽  
Robert Rink ◽  
Anna Wakszyńska ◽  
Roberto Ciavarella ◽  
Marialaura Di Somma ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Storage System ◽  
Rate Of Change ◽  
System Level ◽  
Operation Planning ◽  
Planning Period ◽  
Power Sources ◽  
Real Time Digital Simulator

Along with the increasing share of non-synchronous power sources, the inertia of power systems is being reduced, which can give rise to frequency containment problems should an outage of a generator or a power infeed happen. Low system inertia is eventually unavoidable, thus power system operators need to be prepared for this condition. This paper addresses the problem of low inertia in the power system from two different perspectives. At a system level, it proposes an operation planning methodology, which utilises a combination of power flow and dynamic simulation for calculation of existing inertia and, if need be, synthetic inertia (SI) to fulfil the security criterion of adequate rate of change of frequency (RoCoF). On a device level, it introduces a new concept for active power controller, which can be applied virtually to any power source with sufficient response time to create synthetic inertia. The methodology is demonstrated for a 24 h planning period, for which it proves to be effective. The performance of SI controller activated in a battery energy storage system (BESS) is positively validated using a real-time digital simulator (RTDS). Both proposals can effectively contribute to facilitating the operation of low inertia power systems.

scholarly journals Sizing Hybrid Energy Storage Systems for Distributed Power Systems under Multi-Time Scales

2018 ◽  
Vol 8 (9) ◽  
pp. 1453 ◽  
Author(s):  
Huanan Liu ◽  
Dezhi Li ◽  
Yuting Liu ◽  
Mingyu Dong ◽  
Xiangnan Liu ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Systems ◽  
Power System ◽  
Time Scales ◽  
Carbon Emissions ◽  
Storage Capacity ◽  
Rapid Development ◽  
Super Capacitor ◽  
Energy Storage Capacity

With the rapid development of industry, more fossil energy is consumed to generate electricity, which increases carbon emissions and aggravates the burden of environmental protection. To reduce carbon emissions, traditional centralized power generation networks are transforming into distributed renewable generation systems. However, the deployment of distributed generation systems can affect power system economy and stability. In this paper, under different time scales, system economy, stability, carbon emissions, and renewable energy fluctuation are comprehensively considered to optimize battery and super-capacitor installation capacity for an off-grid power system. After that, based on the genetic algorithm, this paper shows the optimal system operation strategy under the condition of the theoretical best energy storage capacity. Finally, the theoretical best capacity is tested under different renewable energy volatility rates. The simulation results show that by properly sizing the storage system’s capacity, although the average daily costs of the system can increase by 10%, the system’s carbon emissions also reduce by 42%. Additionally, the system peak valley gap reduces by 23.3%, and the renewable energy output’s fluctuation range and system loss of load probability are successfully limited in an allowable range. Lastly, it has less influence on the theoretical best energy storage capacity if the renewable energy volatility rate can be limited to within 10%.

scholarly journals A Review of Virtual Inertia Techniques for Renewable Energy-Based Generators

2020 ◽  
Author(s):  
Ana Fernández-Guillamón ◽  
Emilio Gómez-Lázaro ◽  
Eduard Muljadi ◽  
Ángel Molina-Garcia
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Power Plants ◽  
Control Strategies ◽  
Renewable Energy Sources ◽  
Extensive Discussion ◽  
Renewable Sources ◽  
Virtual Inertia ◽  
Alternative Sources

Over recent decades, the penetration of renewable energy sources (RES), especially photovoltaic and wind power plants, has been promoted in most countries. However, as these both alternative sources have power electronics at the grid interface (inverters), they are electrically decoupled from the grid. Subsequently, stability and reliability of power systems are compromised. Inertia in power systems has been traditionally determined by considering all the rotating masses directly connected to the grid. Thus, as the penetration of renewable units increases, the inertia of the power system decreases due to the reduction of directly connected rotating machines. As a consequence, power systems require a new set of strategies to include these renewable sources. In fact, ‘hidden inertia,’ ‘synthetic inertia’ and ‘virtual inertia’ are terms currently used to represent an artificial inertia created by inverter control strategies of such renewable sources. This chapter reviews the inertia concept and proposes a method to estimate the rotational inertia in different parts of the world. In addition, an extensive discussion on wind and photovoltaic power plants and their contribution to inertia and power system stability is presented.

Sign in / Sign up

Export Citation Format

Share Document