scholarly journals An Impedance Network-Based Three Level Quasi Neutral Point Clamped Inverter with High Voltage Gain

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1261 ◽  
Author(s):  
Muhammad Aqeel Anwar ◽  
Ghulam Abbas ◽  
Irfan Khan ◽  
Ahmed Bilal Awan ◽  
Umar Farooq ◽  
...  
Keyword(s):  
High Voltage ◽  
Low Voltage ◽  
Research Work ◽  
Current Source ◽  
Neutral Point ◽  
Voltage Source ◽  
Duty Ratio ◽  
Voltage Gain ◽  
High Voltage Gain ◽  
Source Current

Due to the impediments of voltage source inverter and current source inverter, Z-Source Inverter (ZSI) has become notorious for better power quality in low and medium power applications. Several modifications are proposed for impedance source in the form of Quasi Z-Source Inverter (QZSI) and Neutral Point Clamped Z-Source Inverter (NPCZSI). However, due to the discontinuity of the source current, NPCZSI is not suitable for some applications, i.e., fuel cell, UPS, and hybrid electric vehicles. Although in later advancements, source current becomes continuous in multilevel QZSI, low voltage gain, higher shoot-through duty ratio, lesser availability of modulation index, and higher voltage stress across switches are still an obstacle in NPCZSI. In this research work, a three-level high voltage gain Neutral Point Clamped Inverter (NPCI) that gives three-level AC output in a single stage, is proposed to boost up the DC voltage at the desired level. At the same time, it detains all the merits of previous topologies of three-level NPCZSI/QZSI. Simulations have been done in the MATLAB/Simulink environment to show the effectiveness of the proposed inverter topology.

scholarly journals High Step-up Coupled Inductor Inverters Based on qSBIs

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3032 ◽  
Author(s):  
Hongchen Liu ◽  
Xi Su ◽  
Junxiong Wang
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Low Voltage ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Passive Components ◽  
Steady State Analysis ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Working Principle

In this paper, two types of high step-up coupled inductor inverters based on qSBIs (quasi- switched boost inverters) are proposed. By applying the coupled inductor to the qSBIs, the voltage gain of the proposed inverter is regulated by turn ratio and duty ratio. Thus, a high voltage gain can be achieved without the circuits operating at the extreme duty cycle by choosing a suitable turn ratio of the coupled inductor. In addition, the proposed circuits have the characteristics of continuous input current and low voltage stress across the passive components. A boost unit can be added to the proposed inverters for further improvement of the voltage gain. In this paper, the working principle, steady state analysis, and the comparisons of the proposed inverter with other impedance-source inverters are described. A 200 W prototype was created and the experimental results confirm the correctness of the analysis in this paper.

scholarly journals Analysis of Steady-State Characteristics for a Newly Designed High Voltage Gain Switched Inductor Z-Source Inverter

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 940 ◽  
Author(s):  
Nafis Subhani ◽  
Ramani Kannan ◽  
Md. Apel Mahmud ◽  
Tushar Kanti Roy ◽  
Mohd Fakhizan Romlie
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Common Ground ◽  
Experimental Studies ◽  
Voltage Source ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Soft Start ◽  
High Voltage Gain ◽  
Boost Factor

This paper aims to develop a new switched inductor assisted strong boost Z-source inverter (SL-SBZSI) topology with high voltage gain and analyze the steady-state characteristics of the proposed topology. In the proposed topology, two switched inductors are used within the series impedance structure of the Z-source inverter (ZSI) in order to achieve the high voltage gain. The steady-state characteristics of the proposed topology are analyzed to disseminate its several advantages as compared to traditional ZSIs. The key advantages include the higher boost factor with lower shoot-through duty ratio and lower voltage stresses on capacitors as well as on switches of the inverter bridge. Furthermore, the proposed topology has the soft-start ability which significantly reduces the inrush start-up current while comparing with the traditional ZSI. In the proposed topology, a common ground is shared between the output AC voltage and the input DC voltage source which categorizes this topology to the doubly grounded inverter. The characteristics of the proposed SL-SBZSI are analyzed by considering two operating condition where the simple boost pulse width modulation (PWM) scheme is used to extract the shoot-through pulses. The characteristics of the proposed topology are also compared with different existing topologies along with the conventional modified capacitor assisted Z-source inverter (MCA-ZSI), whose boost factor is much closer to the proposed topology. Rigorous mathematical analyses are presented to clearly demonstrate the benefits of the proposed topology while simulation studies are carried out to demonstrate its distinct features as compared to the existing topology. Finally, experimental studies are conducted to further validate the theoretical and simulation results.

scholarly journals Conversor Doubler Output Coupled Inductor para Aplicações de Fontes Alternativas

2021 ◽  
Author(s):  
HENRIQUE JAHNKE HOCH ◽  
TIAGO MIGUEL KLEIN FAISTEL ◽  
ADEMIR TOEBE ◽  
ANTóNIO MANUEL SANTOS SPENCER ANDRADE
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Low Voltage ◽  
Energy Generation ◽  
Boost Converter ◽  
Voltage Gain ◽  
Switched Capacitors ◽  
Number Of Components ◽  
Photovoltaic Energy ◽  
High Voltage Gain

High step-up DC-DC converters are necessary in photovoltaic energy generation, due the low voltage of the panels source. This article propose the Doubler Output Coupled Inductor converter. This converter is based in boost converter and utilize switched capacitors and a coupled inductor to maximize the static voltage gain. The converter achieve a high voltage gain with low turns ratio in the coupled inductor and an acceptable duty cycle. Can highlight the converter utilize low number of components and have low voltage and current stresses in semiconductors. To validate and evaluate the operation of the converter a 200W prototype is simulated.

A Novel Nonisolated Ultra-High-Voltage-Gain DC–DC Converter With Low Voltage Stress

2017 ◽  
Vol 64 (4) ◽  
pp. 2809-2819 ◽  
Author(s):  
Yong Cao ◽  
Vahid Samavatian ◽  
Kaveh Kaskani ◽  
Hamidreza Eshraghi
Keyword(s):  
High Voltage ◽  
Low Voltage ◽  
Voltage Gain ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Ultra High Voltage

scholarly journals A dual-switch cubic SEPIC converter with extra high voltage gain

2021 ◽  
Vol 12 (1) ◽  
pp. 199
Author(s):  
Christophe Raoul Fotso Mbobda ◽  
Alain Moise Dikandé
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Magnetic Coupling ◽  
Conversion Ratio ◽  
Duty Ratio ◽  
Voltage Gain ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Extra High Voltage ◽  
Voltage Conversion

To provide a high votage conversion ratio, conventional non-isolated DC-DC boost topologies, which have reduced voltage boost capability, have to operate with extremely high duty cycle ratio, higher than 0.9. This paper proposes a DC-DC converter which is mainly based on the narrow range of duty cycle ratio to achieve extra high voltage conversion gain at relatively reduced voltage stress on semiconductors. In addition, it does include any magnetic coupling structure. The structure of the proposed converter combines the new hybrid SEPIC converter and voltage multiplier cells. From the steady-state analysis, this converter has wide conversion ratio and cubic dependence with respect to the duty ratio and then, can increase the output voltage several times more than the conventional and quadratic converters at the same duty cycle ratio. However, the proposed dual-switch cubic SEPIC converter must withstand higher voltage stress on output switches. To overcome this drawback, an extension of the proposed converter is also introduced and discussed. The superiority of the proposed converter is mainly based on its cubic dependence on the duty cycle ratio that allows it to achieve extra high voltage gain at reduced voltage stress on semiconductors. Simulation results are shown and they corroborate the feasibility, practicality and validity of the concepts of the proposed converter.

An Embedded Half-Bridge Γ-Z-Source Inverter with Reduced Voltage Stress on Capacitors

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6433
Author(s):  
Hamed Mashinchi Maheri ◽  
Dmitri Vinnikov ◽  
Mohsen Hasan Babayi Nozadian ◽  
Elias Shokati Asl ◽  
Ebrahim Babaei ◽  
...  
Keyword(s):  
High Voltage ◽  
Power Loss ◽  
Low Voltage ◽  
Voltage Gain ◽  
Correct Operation ◽  
Operating Modes ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Boost Factor ◽  
Zero Voltage

In this paper, an embedded half-bridge Z-source inverter based on gamma structure is proposed. In contrast with the classical half-bridge inverter, the proposed inverter can generate zero voltage levels in output. High voltage gain and low voltage stress on capacitors are the main advantages of the proposed converter. The value of the boost factor in the proposed structure is increased by changing both the shoot-through (ST) duty cycle and turns ratio of the transformer. The operating principle of the proposed converter in four operating modes is presented. We also calculate the critical inductance and compare the proposed converter with conventional topologies. In addition, power loss and THD analysis are presented. Finally, PSCAD/EMTDC software is used to verify the correct operation of the proposed inverter and the experimental results.

Sign in / Sign up

Export Citation Format

Share Document