scholarly journals A dual-switch cubic SEPIC converter with extra high voltage gain

2021 ◽  
Vol 12 (1) ◽  
pp. 199
Author(s):  
Christophe Raoul Fotso Mbobda ◽  
Alain Moise Dikandé
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Magnetic Coupling ◽  
Conversion Ratio ◽  
Duty Ratio ◽  
Voltage Gain ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Extra High Voltage ◽  
Voltage Conversion

To provide a high votage conversion ratio, conventional non-isolated DC-DC boost topologies, which have reduced voltage boost capability, have to operate with extremely high duty cycle ratio, higher than 0.9. This paper proposes a DC-DC converter which is mainly based on the narrow range of duty cycle ratio to achieve extra high voltage conversion gain at relatively reduced voltage stress on semiconductors. In addition, it does include any magnetic coupling structure. The structure of the proposed converter combines the new hybrid SEPIC converter and voltage multiplier cells. From the steady-state analysis, this converter has wide conversion ratio and cubic dependence with respect to the duty ratio and then, can increase the output voltage several times more than the conventional and quadratic converters at the same duty cycle ratio. However, the proposed dual-switch cubic SEPIC converter must withstand higher voltage stress on output switches. To overcome this drawback, an extension of the proposed converter is also introduced and discussed. The superiority of the proposed converter is mainly based on its cubic dependence on the duty cycle ratio that allows it to achieve extra high voltage gain at reduced voltage stress on semiconductors. Simulation results are shown and they corroborate the feasibility, practicality and validity of the concepts of the proposed converter.

scholarly journals High Step-up Coupled Inductor Inverters Based on qSBIs

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3032 ◽  
Author(s):  
Hongchen Liu ◽  
Xi Su ◽  
Junxiong Wang
Keyword(s):  
Steady State ◽  
High Voltage ◽  
Low Voltage ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Passive Components ◽  
Steady State Analysis ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Working Principle

In this paper, two types of high step-up coupled inductor inverters based on qSBIs (quasi- switched boost inverters) are proposed. By applying the coupled inductor to the qSBIs, the voltage gain of the proposed inverter is regulated by turn ratio and duty ratio. Thus, a high voltage gain can be achieved without the circuits operating at the extreme duty cycle by choosing a suitable turn ratio of the coupled inductor. In addition, the proposed circuits have the characteristics of continuous input current and low voltage stress across the passive components. A boost unit can be added to the proposed inverters for further improvement of the voltage gain. In this paper, the working principle, steady state analysis, and the comparisons of the proposed inverter with other impedance-source inverters are described. A 200 W prototype was created and the experimental results confirm the correctness of the analysis in this paper.

An improved DC-DC converter with high voltage gain based on fully tapped quadratic boost converter for grid connected solar PV micro-inverter

2020 ◽  
pp. 014233122092198
Author(s):  
Lakhdar Bentouati ◽  
Ali Cheknane ◽  
Boumediène Benyoucef ◽  
Oscar Barambones
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Boost Converter ◽  
Maximum Efficiency ◽  
Duty Ratio ◽  
Voltage Gain ◽  
Solar Pv ◽  
Pv Systems ◽  
High Voltage Gain ◽  
Urgent Task

The need to increase the voltage level produced by PV systems becomes an urgent task to be compatible with the requirements of the AC load, but we meet problems in the operation of the step-up converter at a high duty cycle which is not preferred due to the reduction in voltage gain, and also a higher number of turns ratio in the windings inductance coupled adds to the overall losses of the converter. This article proposes an improved DC-DC converter with a lower duty cycle by integrating three tapped-inductors in new topology, which combined quadratic boost converter and tapped-inductor boost converter. The proposed converter achieves a high voltage gain with a lower duty ratio (Gmax = 14.32) and a maximum efficiency of 98.68% is improved compared to the voltage gain and efficiency results of these converters in several recently published references. The analyses are done theoretically and supported with simulation results. A prototype of the proposed converter has been built to experimentally validate the obtained results.

scholarly journals A Transformer less Buck-Boost Converter with Single Switch

2020 ◽  
Vol 9 (12) ◽  
pp. 355-358
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Boost Converter ◽  
Voltage Gain ◽  
Improve Efficiency ◽  
Conduction Loss ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Active Switch

This paper introduces a modern, transformerless buck-boost dc-dc converter. In this topology, one active switch is used. The proposed buck-boost converter voltage gain is higher compared to the conventional buck-boost converter. With a moderate duty cycle, high voltage gain can be reached. The switch's voltage stress is minimal. As a consequence, the power switch's conduction loss is relatively low to improve efficiency. The converter is simple, hence it will be easy to control the proposed converter.

scholarly journals Conversor Doubler Output Coupled Inductor para Aplicações de Fontes Alternativas

2021 ◽  
Author(s):  
HENRIQUE JAHNKE HOCH ◽  
TIAGO MIGUEL KLEIN FAISTEL ◽  
ADEMIR TOEBE ◽  
ANTóNIO MANUEL SANTOS SPENCER ANDRADE
Keyword(s):  
High Voltage ◽  
Duty Cycle ◽  
Low Voltage ◽  
Energy Generation ◽  
Boost Converter ◽  
Voltage Gain ◽  
Switched Capacitors ◽  
Number Of Components ◽  
Photovoltaic Energy ◽  
High Voltage Gain

High step-up DC-DC converters are necessary in photovoltaic energy generation, due the low voltage of the panels source. This article propose the Doubler Output Coupled Inductor converter. This converter is based in boost converter and utilize switched capacitors and a coupled inductor to maximize the static voltage gain. The converter achieve a high voltage gain with low turns ratio in the coupled inductor and an acceptable duty cycle. Can highlight the converter utilize low number of components and have low voltage and current stresses in semiconductors. To validate and evaluate the operation of the converter a 200W prototype is simulated.

scholarly journals A Modified High Voltage Gain SEPIC Based DC-DC Converter with Continuous Conduction Mode

2020 ◽  
Vol 6 (12) ◽  
pp. 268-274
Author(s):  
G.Vijaykumar and Dr.V.Geetha
Keyword(s):  
High Voltage ◽  
High Efficiency ◽  
Input Voltage ◽  
Voltage Gain ◽  
Pv System ◽  
Operating Modes ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
High Output Voltage ◽  
High Output

A high voltage gain modified SEPIC converter is proposed in this paper. This proposed converter has many advantages i.e., high output voltage, lower voltage stress, high efficiency, voltage gain is high without any coupled inductor and transformer, continuous input current. Thus, there is no overshoot voltage at turn-off process for switches. By using single switches, the CCM mode operation can be easily controlled by this converter, so control system is simple and also wide output values is obtained only by modifying the duty cycle. This modified converter has lower components than conventional converter. The operating modes and design of modified converter are discussed. The output power of this converter is 6 watts. By this converter, this converter capable of developing the two and half times of input voltage. The PV system also used this converter to develop high voltage gain. This high voltage gain is achieved by using MATLAB/SIMULIMK platform.

scholarly journals Modified Cascaded Z-Source High Step-Up Boost Converter

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1932
Author(s):  
Navid Salehi ◽  
Herminio Martínez-García ◽  
Guillermo Velasco-Quesada
Keyword(s):  
High Voltage ◽  
Boost Converter ◽  
Experimental Results ◽  
Input Current ◽  
Voltage Gain ◽  
Low Input ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Photovoltaic Applications ◽  
Current Ripple

To improve the voltage gain of step-up converters, the cascaded technique is considered as a possible solution in this paper. By considering the concept of cascading two Z-source networks in a conventional boost converter, the proposed topology takes the advantages of both impedance source and cascaded converters. By applying some modifications, the proposed converter provides high voltage gain while the voltage stress of the switch and diodes is still low. Moreover, the low input current ripple of the converter makes it absolutely appropriate for photovoltaic applications in expanding the lifetime of PV panels. After analyzing the operation principles of the proposed converter, we present the simulation and experimental results of a 100 W prototype to verify the proposed converter performance.

A Novel Nonisolated Ultra-High-Voltage-Gain DC–DC Converter With Low Voltage Stress

2017 ◽  
Vol 64 (4) ◽  
pp. 2809-2819 ◽  
Author(s):  
Yong Cao ◽  
Vahid Samavatian ◽  
Kaveh Kaskani ◽  
Hamidreza Eshraghi
Keyword(s):  
High Voltage ◽  
Low Voltage ◽  
Voltage Gain ◽  
High Voltage Gain ◽  
Voltage Stress ◽  
Ultra High Voltage
Sign in / Sign up

Export Citation Format

Share Document