scholarly journals Carrier Transmission Mechanism-Based Analysis of Front Surface Field Effects on Simplified Industrially Feasible Interdigitated Back Contact Solar Cells

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5303
Author(s):  
Xiaoxuan Li ◽  
Aimin Liu
Keyword(s):  
Solar Cells ◽  
Doping Concentration ◽  
Minority Carrier ◽  
Front Surface ◽  
Back Contact ◽  
Transmission Mechanisms ◽  
Surface Field ◽  
Surface Doping ◽  
Collection Probability ◽  
The Impact

Interdigitated back contact (IBC) n-type silicon solar cells with a different front surface layer doping concentration were fabricated and studied and the influence of the front surface doping level was analyzed via simulation (PC1D). The IBC cells were processed by industrially feasible technologies including laser ablation and screen printing; photolithography was not used. A maximum efficiency of up to 20.88% was achieved at an optimal front surface field (FSF) peak doping concentration of 4.8 × 1019 cm−3 with a sheet resistance of approximately 95 Ω/square, corresponding to Jsc = 40.05 mA/cm2, Voc = 671 mV and a fill factor of 77.70%. The effects of the front surface doping level were studied in detail by analyzing parameters related to carrier transmission mechanisms such as minority carrier concentration, minority carrier lifetime and the saturation current density of the FSF (J0e). The influence of the front surface recombination velocity (FSRV) on the performance of IBC solar cells with different FSF layer doping concentrations was also investigated and was verified by examining the variation in the minority carrier density as a function of the distance from the front surface. In particular, the impact of the FSF doping concentration on the Jsc of the IBC cells was clarified by considering carrier transmission mechanisms and the charge-collection probability. The trends revealed in the simulations agreed with the corresponding experimental data obtained from the fabricated IBC solar cells. This study not only verifies that the presented simulation is a reasonable and reliable guide for choosing the optimal front surface doping concentration in industrial IBC solar cells but also provides a deeper physical understanding of the impact that front surface layer doping has on the IBC solar cell performance considering carrier transmission mechanisms and the charge-collection probability.

scholarly journals Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3275
Author(s):  
Devendra KC ◽  
Deb Kumar Shah ◽  
M. Shaheer Akhtar ◽  
Mira Park ◽  
Chong Yeal Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Doping Concentration ◽  
Carrier Lifetime ◽  
Short Circuit ◽  
Back Surface ◽  
Back Surface Field ◽  
Cdte Solar Cell ◽  
Cdte Solar Cells ◽  
Surface Field

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (Isc = 2.09 A), power conversion efficiency (h = 15%), and quantum efficiency (QE ~ 85%) were achieved at a carrier lifetime of 1 × 103 ms and a doping concentration of 1 × 1017 cm−3 of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 mm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.

Sign in / Sign up

Export Citation Format

Share Document