scholarly journals Annual Energy Performance of an Air Handling Unit with a Cross-Flow Heat Exchanger

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1519
Author(s):  
Piotr Michalak
Keyword(s):  
Heat Exchanger ◽  
Heat Recovery ◽  
Energy Savings ◽  
Cross Flow ◽  
Energy Performance ◽  
Net Energy ◽  
Heating And Cooling ◽  
Air Handling Unit ◽  
Temperature Efficiency ◽  
Flow Heat

Heat recovery from ventilation air is proven technology resulting in significant energy savings in modern buildings. The article presents an energy analysis of an air handling unit with a cross-flow heat exchanger in an office building in Poland. Measurements were taken during one year of operation, from 1 August 15 to 31 July 16, covering both heating and cooling periods. Calculated annual temperature efficiency of heat and cold recovery amounted to 65.2% and 64.6%, respectively, compared to the value of 59.5% quoted by the manufacturer. Monthly efficiency of heat recovery was from 37.6% in August to 68.7% in November, with 63.9% on average compared to 59.5% declared by the manufacturer. Cold recovery was from 63.3% in April to 72.8% in September, with 68.1% annually. Calculated recovered heat and cold amounted 25.6 MWh and 0.26 MWh, respectively. Net energy savings varied from −0.46 kWh/m2 in August, when consumption by fans exceeded savings, to 5.60 kWh/m2 in January.

Experimental Validation of the Laboratory Air Handling Unit System (LAHU): Part I — Winter Operation

Solar Energy ◽  
2005 ◽  
Author(s):  
Yujie Cui ◽  
Mingsheng Liu ◽  
Kirk Conger
Keyword(s):  
Pump Power ◽  
Heat Recovery ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Experimental Methodology ◽  
Air Handling Unit ◽  
Winter Operation ◽  
Air Control ◽  
Validation Experiments

The Laboratory Air Handling Unit (LAHU) system for laboratory buildings has been developed and optimized. Theoretical study has concluded that the LAHU with optimal outside air control and optimal heat recovery control significantly reduces thermal energy use, saves pump power consumption and improves office indoor air quality. This paper presents validation experiments of LAHU energy performance in a large university research building including detailed experimental methodology, procedures and preliminary experimental energy savings results. The experiments establish that the LAHU can reduce annual heating by over 30% and can reduce heat recovery pump power by over 50% for this typical laboratory building.

Experimental Validation of the Laboratory Air Handling Unit System (LAHU)—Part I: Winter Operation

2006 ◽  
Vol 129 (2) ◽  
pp. 235-242 ◽  
Author(s):  
Yujie Cui ◽  
Mingsheng Liu ◽  
Kirk Conger
Keyword(s):  
Pump Power ◽  
Heat Recovery ◽  
Experimental Validation ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Experimental Methodology ◽  
Air Handling Unit ◽  
Heating Energy Consumption ◽  
Winter Operation

The laboratory air handling unit (LAHU) system for laboratory buildings has been developed and optimized. Theoretical study has concluded that the LAHU with optimal outside air control and optimal heat recovery control significantly reduces thermal energy use, saves pump power consumption and improves office indoor air quality. This paper presents validation experiments of the LAHU energy performance for the winter operation in a large university research building including detailed experimental methodology, procedures and experimental energy savings results. The experiments establish that the LAHU can reduce annual heating energy consumption by over 30% and can reduce heat recovery pump power by over 50%peryear for this typical laboratory building. The experimental validation of the LAHU for the summer operation will be reported in a followup paper.

scholarly journals A Study of Optimal Specifications for Light Shelves with Photovoltaic Modules to Improve Indoor Comfort and Save Building Energy

2021 ◽  
Vol 18 (5) ◽  
pp. 2574
Author(s):  
Heangwoo Lee ◽  
Xiaolong Zhao ◽  
Janghoo Seo
Keyword(s):  
Energy Savings ◽  
Building Energy ◽  
Energy Performance ◽  
Building Energy Efficiency ◽  
Efficiency Change ◽  
Photovoltaic Modules ◽  
Heating And Cooling ◽  
Pv Module ◽  
Pv Modules ◽  
Indoor Comfort

Recent studies on light shelves found that building energy efficiency could be maximized by applying photovoltaic (PV) modules to light shelf reflectors. Although PV modules generate a substantial amount of heat and change the consumption of indoor heating and cooling energy, performance evaluations carried out thus far have not considered these factors. This study validated the effectiveness of PV module light shelves and determined optimal specifications while considering heating and cooling energy savings. A full-scale testbed was built to evaluate performance according to light shelf variables. The uniformity ratio was found to improve according to the light shelf angle value and decreased as the PV module installation area increased. It was determined that PV modules should be considered in the design of light shelves as their daylighting and concentration efficiency change according to their angles. PV modules installed on light shelves were also found to change the indoor cooling and heating environment; the degree of such change increased as the area of the PV module increased. Lastly, light shelf specifications for reducing building energy, including heating and cooling energy, were not found to apply to PV modules since PV modules on light shelf reflectors increase building energy consumption.

Heat and Mass Transfer to Air in a Cross Flow Heat Exchanger with Surface Deluge Cooling

2016 ◽  
Vol 24 (01) ◽  
pp. 1650002 ◽  
Author(s):  
Andrea Diani ◽  
Luisa Rossetto ◽  
Roberto Dall’Olio ◽  
Daniele De Zen ◽  
Filippo Masetto
Keyword(s):  
Heat Exchanger ◽  
Heat Flow ◽  
Flow Rate ◽  
Data Center ◽  
Heat Dissipation ◽  
Cross Flow ◽  
Critical Conditions ◽  
Heat Flow Rate ◽  
External Temperature ◽  
Flow Heat

Cross flow heat exchangers, when applied to cool data center rooms, use external air (process air) to cool the air stream coming from the data center room (primary air). However, an air–air heat exchanger is not enough to cope with extreme high heat loads in critical conditions (high external temperature). Therefore, water can be sprayed in the process air to increase the heat dissipation capability (wet mode). Water evaporates, and the heat flow rate is transferred to the process air as sensible and latent heat. This paper proposes an analytical approach to predict the behavior of a cross flow heat exchanger in wet mode. The theoretical results are then compared to experimental tests carried out on a real machine in wet mode conditions. Comparisons are given in terms of calculated versus experimental heat flow rate and evaporated water mass flow rate, showing a good match between theoretical and experimental values.

EFFECT OF CONDENSATION ON THE EFFICIENCY OF HEAT RECOVERY VENTILATORS FOR BROILER HOUSES

2013 ◽  
Vol 21 (02) ◽  
pp. 1350009 ◽  
Author(s):  
HWATAIK HAN ◽  
SANG-HOON NAM ◽  
GEON-SOO HAN
Keyword(s):  
Heat Exchanger ◽  
Relative Humidity ◽  
Latent Heat ◽  
Heat Recovery ◽  
Harsh Environments ◽  
Sensible Heat ◽  
Outdoor Temperature ◽  
Toxic Gases ◽  
Temperature Efficiency ◽  
Plate Type

This study experimentally investigates the effect of internal condensation on the performance of a heat recovery ventilator. Experiments were performed using a plate-type sensible heat exchanger element that was designed for very humid and dusty environments such as chicken broiler houses. The results of these experiments show that the temperature efficiency considering condensation is always greater than that without considering latent heat. As outdoor temperature decreases or indoor relative humidity increases, temperature efficiency increases owing to an increase in the rate of condensation. The present polypropylene-based sensible heat exchanger element could be a solution for harsh environments because it can discharge condensate water by gravity and is resistant to moisture and other toxic gases.

Sign in / Sign up

Export Citation Format

Share Document