Experimental Validation of the Laboratory Air Handling Unit System (LAHU): Part I — Winter Operation

Solar Energy ◽  
2005 ◽  
Author(s):  
Yujie Cui ◽  
Mingsheng Liu ◽  
Kirk Conger
Keyword(s):  
Pump Power ◽  
Heat Recovery ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Experimental Methodology ◽  
Air Handling Unit ◽  
Winter Operation ◽  
Air Control ◽  
Validation Experiments

The Laboratory Air Handling Unit (LAHU) system for laboratory buildings has been developed and optimized. Theoretical study has concluded that the LAHU with optimal outside air control and optimal heat recovery control significantly reduces thermal energy use, saves pump power consumption and improves office indoor air quality. This paper presents validation experiments of LAHU energy performance in a large university research building including detailed experimental methodology, procedures and preliminary experimental energy savings results. The experiments establish that the LAHU can reduce annual heating by over 30% and can reduce heat recovery pump power by over 50% for this typical laboratory building.

Experimental Validation of the Laboratory Air Handling Unit System (LAHU)—Part I: Winter Operation

2006 ◽  
Vol 129 (2) ◽  
pp. 235-242 ◽  
Author(s):  
Yujie Cui ◽  
Mingsheng Liu ◽  
Kirk Conger
Keyword(s):  
Pump Power ◽  
Heat Recovery ◽  
Experimental Validation ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Experimental Methodology ◽  
Air Handling Unit ◽  
Heating Energy Consumption ◽  
Winter Operation

The laboratory air handling unit (LAHU) system for laboratory buildings has been developed and optimized. Theoretical study has concluded that the LAHU with optimal outside air control and optimal heat recovery control significantly reduces thermal energy use, saves pump power consumption and improves office indoor air quality. This paper presents validation experiments of the LAHU energy performance for the winter operation in a large university research building including detailed experimental methodology, procedures and experimental energy savings results. The experiments establish that the LAHU can reduce annual heating energy consumption by over 30% and can reduce heat recovery pump power by over 50%peryear for this typical laboratory building. The experimental validation of the LAHU for the summer operation will be reported in a followup paper.

scholarly journals Annual Energy Performance of an Air Handling Unit with a Cross-Flow Heat Exchanger

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1519
Author(s):  
Piotr Michalak
Keyword(s):  
Heat Exchanger ◽  
Heat Recovery ◽  
Energy Savings ◽  
Cross Flow ◽  
Energy Performance ◽  
Net Energy ◽  
Heating And Cooling ◽  
Air Handling Unit ◽  
Temperature Efficiency ◽  
Flow Heat

Heat recovery from ventilation air is proven technology resulting in significant energy savings in modern buildings. The article presents an energy analysis of an air handling unit with a cross-flow heat exchanger in an office building in Poland. Measurements were taken during one year of operation, from 1 August 15 to 31 July 16, covering both heating and cooling periods. Calculated annual temperature efficiency of heat and cold recovery amounted to 65.2% and 64.6%, respectively, compared to the value of 59.5% quoted by the manufacturer. Monthly efficiency of heat recovery was from 37.6% in August to 68.7% in November, with 63.9% on average compared to 59.5% declared by the manufacturer. Cold recovery was from 63.3% in April to 72.8% in September, with 68.1% annually. Calculated recovered heat and cold amounted 25.6 MWh and 0.26 MWh, respectively. Net energy savings varied from −0.46 kWh/m2 in August, when consumption by fans exceeded savings, to 5.60 kWh/m2 in January.

scholarly journals Energy and Greenhouse Gas Savings for LEED-Certified U.S. Office Buildings

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 749
Author(s):  
John H. Scofield ◽  
Susannah Brodnitz ◽  
Jakob Cornell ◽  
Tian Liang ◽  
Thomas Scofield
Keyword(s):  
Greenhouse Gas ◽  
Energy Use ◽  
Energy Savings ◽  
Electric Energy ◽  
Building Energy ◽  
Energy Performance ◽  
Office Buildings ◽  
Ghg Emission ◽  
Site Energy ◽  
New Construction

In this work, we present results from the largest study of measured, whole-building energy performance for commercial LEED-certified buildings, using 2016 energy use data that were obtained for 4417 commercial office buildings (114 million m2) from municipal energy benchmarking disclosures for 10 major U.S. cities. The properties included 551 buildings (31 million m2) that we identified as LEED-certified. Annual energy use and greenhouse gas (GHG) emission were compared between LEED and non-LEED offices on a city-by-city basis and in aggregate. In aggregate, LEED offices demonstrated 11% site energy savings but only 7% savings in source energy and GHG emission. LEED offices saved 26% in non-electric energy but demonstrated no significant savings in electric energy. LEED savings in GHG and source energy increased to 10% when compared with newer, non-LEED offices. We also compared the measured energy savings for individual buildings with their projected savings, as determined by LEED points awarded for energy optimization. This analysis uncovered minimal correlation, i.e., an R2 < 1% for New Construction (NC) and Core and Shell (CS), and 8% for Existing Euildings (EB). The total measured site energy savings for LEED-NC and LEED-CS was 11% lower than projected while the total measured source energy savings for LEED-EB was 81% lower than projected. Only LEED offices certified at the gold level demonstrated statistically significant savings in source energy and greenhouse gas emissions as compared with non-LEED offices.

scholarly journals The Performance Gap in Energy-Efficient Office Buildings: How the Occupants Can Help?

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1480 ◽  
Author(s):  
Qadeer Ali ◽  
Muhammad Jamaluddin Thaheem ◽  
Fahim Ullah ◽  
Samad M. E. Sepasgozar
Keyword(s):  
Energy Efficient ◽  
Behavioral Interventions ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Office Buildings ◽  
Occupant Behavior ◽  
Energy Usage ◽  
Performance Gap ◽  
Energy Efficient Buildings

Rising demand and limited production of electricity are instrumental in spreading the awareness of cautious energy use, leading to the global demand for energy-efficient buildings. This compels the construction industry to smartly design and effectively construct these buildings to ensure energy performance as per design expectations. However, the research tells a different tale: energy-efficient buildings have performance issues. Among several reasons behind the energy performance gap, occupant behavior is critical. The occupant behavior is dynamic and changes over time under formal and informal influences, but the traditional energy simulation programs assume it as static throughout the occupancy. Effective behavioral interventions can lead to optimized energy use. To find out the energy-saving potential based on simulated modified behavior, this study gathers primary building and occupant data from three energy-efficient office buildings in major cities of Pakistan and categorizes the occupants into high, medium, and low energy consumers. Additionally, agent-based modeling simulates the change in occupant behavior under the direct and indirect interventions over a three-year period. Finally, energy savings are quantified to highlight a 25.4% potential over the simulation period. This is a unique attempt at quantifying the potential impact on energy usage due to behavior modification which will help facility managers to plan and execute necessary interventions and software experts to develop effective tools to model the dynamic usage behavior. This will also help policymakers in devising subtle but effective behavior training strategies to reduce energy usage. Such behavioral retrofitting comes at a much lower cost than the physical or technological retrofit options to achieve the same purpose and this study establishes the foundation for it.

scholarly journals Comparison Evaluations of VRF and RTU Systems Performance on Flexible Research Platform

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Je-hyeon Lee ◽  
Piljae Im ◽  
Jeffrey D. Munk ◽  
Mini Malhotra ◽  
Min-seok Kim ◽  
...  
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Thermal Conditions ◽  
The United States ◽  
Energy Performance ◽  
Coefficient Of Performance ◽  
Part Load ◽  
Variable Air Volume ◽  
Heating And Cooling ◽  
Load Conditions

The energy performance of a variable refrigerant flow (VRF) system was evaluated using an occupancy-emulated research building in the southeastern region of the United States. Full- and part-load performance of the VRF system in heating and cooling seasons was compared with a conventional rooftop unit (RTU) variable-air-volume system with electric resistance heating. During both the heating and cooling seasons, full- and part-load conditions (i.e., 100%, 75%, and 50% thermal loads) were maintained alternately for 2 to 3 days each, and the energy use, thermal conditions, and coefficient of performance (COP) for the RTU and VRF system were measured. During the cooling season, the VRF system had an average COP of 4.2, 3.9, and 3.7 compared with 3.1, 3.0, and 2.5 for the RTU system under 100%, 75%, and 50% load conditions and resulted in estimated energy savings of 30%, 37%, and 47%, respectively. During the heating season, the VRF system had an average COP ranging from 1.2 to 2.0, substantially higher than the COPs of the RTU system, and resulted in estimated energy savings of 51%, 47%, and 27% under the three load conditions, respectively.

A comparative meta-analysis of residential green building policies and their impact on overall energy consumption patterns

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Naim Jabbour
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Building ◽  
Green Building ◽  
Energy Performance ◽  
Residential Energy ◽  
Residential Energy Consumption ◽  
The Eu

Data shows residential energy consumption constituting a significant portion of the overall energy end use in the European Union (EU), ranging between 15% and 30%. Furthermore, the EU’s dependency on foreign fossil fuel-based energy imports has been steadily increasing since 1993, constituting approximately 60% of its primary energy. This paper provides an analytical re-view of diverse residential building/energy policies in targeted EU countries, to shed insight on the impact of such policies and measures on energy use and efficiency trends. Accordingly, the adoption of robust residential green and energy efficient building policies in the EU has increased in the past decade. Moreover, data from EU energy efficiency and consumption databases attributes 44% of total energy savings since 2000 to energy upgrades and improvements within the residential sector. Consequently, many EU countries and organizations are continuously evaluating residential building energy consumption patterns to increase the sec-tor’s overall energy performance. To that end, energy efficiency gains in EU households were measured at 1% in 2000 compared to 27.8% in 2016, a 2600% increase. Accordingly, 36 policies have been implemented successfully since 1991 across the EU targeting improvements in residential energy efficiency and reductions in energy use. Moreover, the adoption of National Energy Efficiency Actions Plans (NEEACP) across the EU have been a major driver of energy savings and energy efficiency. Most energy efficiency plans have followed a holistic multi-dimensional approach targeting the following areas, legislative actions, financial incentives, fiscal tax exemptions, and public education and awareness programs and campaigns. These measures and policy instruments have cumulatively generated significant energy savings and measurable improvements in energy performance across the EU since their inception. As a result, EU residential energy consumption trends show a consistent decrease over the past decade. The purpose of this analysis is to explore, examine, and compare the various green building and energy-related policies in the EU, highlighting some of the more robust and progressive aspects of such policies. The paper will also analyze the multiple policies and guidelines across targeted European nations. Lastly, the study will assess the status of green residential building policies in Lebanon, drawing from the comprehensive European measures, in order to recommend a comprehensive set of guidelines to advance energy policies and building practices in the country. Keywords: Building Policies; Residential Energy Patterns; Residential Energy Consumption; Energy Savings

Design and Performance of the Van Geet Off-Grid Home

2004 ◽  
Vol 126 (2) ◽  
pp. 738-743 ◽  
Author(s):  
C. Dennis Barley ◽  
Paul Torcellini ◽  
Otto Van Geet
Keyword(s):  
Computer Simulation ◽  
Energy Efficient ◽  
Performance Monitoring ◽  
Energy Use ◽  
Energy Savings ◽  
Energy Performance ◽  
Hot Water ◽  
Domestic Water ◽  
Heating And Cooling ◽  
And Performance

The Van Geet home near Denver, Colorado, demonstrates the successful integration of energy conservation measures and renewable energy supply in a beautiful, comfortable, energy-efficient, 295-m23,176-ft2 off-grid home in a cold, sunny climate. Features include a tight envelope, energy-efficient appliances, passive solar heating (direct gain and Trombe wall), natural cooling, solar hot water, and photovoltaics. In addition to describing this house and its performance, this paper describes the recommended design process of (1) setting a goal for energy efficiency at the outset, (2) applying rules of thumb, and (3) using computer simulation to fine-tune the design. Performance monitoring and computer simulation are combined for the best possible analysis of energy performance. In this case, energy savings are estimated as 89% heating and cooling (compared to 95 MEC), 83% electrical, and nearly 100% domestic water heating. The heating and cooling energy use is 8.96kJ/°Cs˙days˙m20.44Btu/°Fs˙days˙ft2.

scholarly journals Impact of the COVID-19 Pandemic on the Energy Use at the University of Almeria (Spain)

2021 ◽  
Vol 13 (11) ◽  
pp. 5843
Author(s):  
Mehdi Chihib ◽  
Esther Salmerón-Manzano ◽  
Mimoun Chourak ◽  
Alberto-Jesus Perea-Moreno ◽  
Francisco Manzano-Agugliaro
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Electricity Consumption ◽  
Energy Performance ◽  
Energy Sector ◽  
Wide Range ◽  
University Buildings ◽  
The University ◽  
The Impact

The COVID-19 pandemic has caused chaos in many sectors and industries. In the energy sector, the demand has fallen drastically during the first quarter of 2020. The University of Almeria campus also declined the energy consumption in 2020, and through this study, we aimed to measure the impact of closing the campus on the energy use of its different facilities. We built our analysis based upon the dataset collected during the year 2020 and previous years; the patterns evolution through time allowed us to better understand the energy performance of each facility during this exceptional year. We rearranged the university buildings into categories, and all the categories reduced their electricity consumption share in comparison with the previous year of 2019. Furthermore, the portfolio of categories presented a wide range of ratios that varied from 56% to 98%, the library category was found to be the most influenced, and the research category was found to be the least influenced. This opened questions like why some facilities were influenced more than others? What can we do to reduce the energy use even more when the facilities are closed? The university buildings presented diverse structures that revealed differences in energy performance, which explained why the impact of such an event (COVID-19 pandemic) is not necessarily relevant to have equivalent variations. Nevertheless, some management deficiencies were detected, and some energy savings measures were proposed to achieve a minimum waste of energy.

scholarly journals Waste Heat Recovery Technologies Revisited with Emphasis on New Solutions, including Heat Pipes, and Case Studies

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 384
Author(s):  
Paul Christodoulides ◽  
Rafaela Agathokleous ◽  
Lazaros Aresti ◽  
Soteris A. Kalogirou ◽  
Savvas A. Tassou ◽  
...  
Keyword(s):  
Case Studies ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Energy Savings ◽  
New Technologies ◽  
Waste Heat ◽  
Cost Savings ◽  
Energy Performance ◽  
The European Union ◽  
Target Energy

Industrial processes are characterized by energy losses, such as heat streams rejected to the environment in the form of exhaust gases or effluents occurring at different temperature levels. Hence, waste heat recovery (WHR) has been a challenge for industries, as it can lead to energy savings, higher energy efficiency, and sustainability. As a consequence, WHR methods and technologies have been used extensively in the European Union (EU) (and worldwide for that matter). The current paper revisits and reviews conventional WHR technologies, their use in all types of industry, and their limitations. Special attention is given to alternative “new” technologies, which are discussed for parameters such as projected energy and cost savings. Finally, an extended review of case studies regarding applications of WHR technologies is presented. The information presented here can also be used to determine target energy performance, as well as capital and installation costs, for increasing the attractiveness of WHR technologies, leading to the widespread adoption by industry.

scholarly journals Thermal Analysis of an Industrial Furnace

2016 ◽  
Author(s):  
Mirko Filipponi ◽  
Federico Rossi ◽  
Andrea Presciutti ◽  
Stefania De Ciantis ◽  
Beatrice Castellani ◽  
...  
Keyword(s):  
Energy Use ◽  
Energy Savings ◽  
Cfd Simulation ◽  
Energy Performance ◽  
High Energy ◽  
Simulation Software ◽  
Pollutant Emissions ◽  
Door Opening ◽  
Temperature And Pressure ◽  
Mechanical Machining

Industries, which are mainly responsible for high energy consumptions, need to invest in research projects in order to develop new managing systems for rational energy use and to tackle the devastating effects of climate change caused by human behavior. The study reported in this paper concerns the forging industry, where the production processes generally start with the heating of the steel in furnaces and continue with other processes, such as heat treatments and mechanical machining. One of the most critical operations, in terms of energy loss, is the opening of the furnace doors for the insertion and extraction operations. During this time, the temperature of the furnaces decreases by hundreds of degrees in a few minutes. Because the dispersed heat needs to be supplied again through the combustion of fuel, increasing the consumption of energy and the pollutant emissions, the evaluation of the amount of the lost energy is crucial for the development of operating or mechanical systems able to contain this dispersion. To perform this study, CFD simulation software was used. Results show that at the door opening, because of temperature and pressure differences between the furnace and the ambient, turbulences are generated. Results also show that the amount of energy lost for an opening of 10 minutes for radiation, convection and conduction is equal to 5606 MJ where convection is the main contributor with 5020 MJ. The model created, after being validated, has been applied to perform other simulations in order to improve the energy performance of the furnace. Results show that a reduction of the opening time of the door allows energy savings and limits pollutant emissions.

Sign in / Sign up

Export Citation Format

Share Document