scholarly journals Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor—Part II (The Method Based on the Characteristics of Effective Absorbency of the Motor)

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1648
Author(s):  
Pawel Sliwinski
Keyword(s):  
Pressure Drop ◽  
Rotational Speed ◽  
Nonlinear Function ◽  
Energy Losses ◽  
Hydraulic Motor ◽  
Volume Calculation ◽  
Method Of Determination ◽  
Actual Working ◽  
Working Volume

In this article, the second method of determination of the theoretical and actual working volume of a hydraulic motor is described. The proposed new method is based on the characteristics of effective absorbency of the motor. The effective absorbency has been defined as the ratio of flow rate in a motor to the rotational speed of the motor’s shaft. It has been shown that the effective absorbency is a nonlinear function of the rotational speed and nonlinear function of the pressure drop in the motor’s working chambers. Furthermore, it has been proven that the actual working volume of a motor is a function of a third degree of pressure drop in the motor’s working chamber. The actual working volume should be taken to assess the mechanical and volumetric energy losses in the motor. Furthermore, the influence of the flowmeter location in the measurement system and the compressibility of liquid on the result of the theoretical and actual working volume calculation was also taken into account and is described in this article. The differences in the assessment of the volumetric efficiency assuming the theoretical and actual working volume was also shown.

scholarly journals Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5933
Author(s):  
Pawel Sliwinski
Keyword(s):  
Pressure Drop ◽  
Flow Rate ◽  
Constant Pressure ◽  
Nonlinear Function ◽  
Experimental Tests ◽  
Hydraulic Motor ◽  
Volume Calculation ◽  
Actual Working ◽  
Working Volume

A new methodology of determination of the theoretical and actual working volume of a hydraulic motor based on the characteristics of the delivered flow rate into hydraulic motor vs. the rotational speed at a constant pressure drop in the working chambers is described in this paper. A new method of describing the delivered flow rate into a motor per one shaft revolution as a nonlinear function of the pressure drop in the motor working chamber is proposed. The influence of the flowmeter location in the measurement system on the result of the theoretical and actual working volume calculation is described. It is shown that, in order to assess the energy losses (volumetric and mechanical) in the motor, the actual working volume must be a polynomial function (third degree) of its pressure drop in the working chambers. The result of the experimental tests of the satellite hydraulic motor confirmed the validity of the proposed method. The result of the calculation of the theoretical working volume of the motor according to the proposed method was compared with the results of calculations according to known methods.

scholarly journals Field of Work and Energy Efficiency of Hydrostatic Drives on the Example of Two Tested Systems with Proportional Control of the Cylinder’s Speed

2019 ◽  
Vol 49 (4) ◽  
pp. 203-219
Author(s):  
Grzegorz Skorek
Keyword(s):  
Energy Efficiency ◽  
Power Flow ◽  
Drive System ◽  
Energy Losses ◽  
Test Results ◽  
Hydraulic Motor ◽  
Power Increase ◽  
Physical Quantities ◽  
Direction Opposite

Abstract The presented test results are an example of simulating determination of the hydrostatic field of the drive system and the energy efficiency of the system as a dependence on the speed and load coefficients of the hydraulic motor used in the system. The issues related to the determination of energy losses and energy efficiency of the hydraulic motor or drive system, which should be determined as dependent on the physical quantities independent of these losses, were also discussed. A Paszota diagram of the power increase in the direction opposite to the direction of the power flow, replacing the Sankey diagram of the power decrease in the direction of the power flow in the hydraulic motor or in the drive system was analyzed.

scholarly journals Measuring Instruments Used at the Research and Accuracy of Defining the Efficiency of Drive Systems

2019 ◽  
Vol 26 (2) ◽  
pp. 129-135
Author(s):  
Grzegorz Skorek
Keyword(s):  
Energy Efficiency ◽  
Test Stand ◽  
Energy Losses ◽  
Measuring Instruments ◽  
Motor Speed ◽  
Hydraulic Motor ◽  
Accuracy Of Measurements ◽  
Drive Systems ◽  
The Mathematical Model

Abstract The aim of the article is to look at the possibility of accurately determining the energy efficiency of drive systems thanks to the use of high quality sensors and measuring instruments. The types of measuring instruments used on the test stand are presented. The results of experimentally determined efficiencies and simulationally determined efficiencies of two hydrostatic systems with throttling control were compared, which are fed with a constant capacity pump. The choice of the analysed systems is not accidental. There is still a view in the literature about limited possibilities of energy systems with proportional control. The research stand was very carefully designed and made. The applied measuring instruments were characterized by high accuracy of measurements. The issues related to the determination of energy losses and energy efficiency of the engine or drive system, which should be determined as dependent on the physical quantities independent of these losses, were also discussed. For laboratory verification, measurement methods were developed, the test stand was adapted and automated. It consists of tested system and loaded system. The measurements during the tests were saved on the computer disk. In order to be able to compare the efficiency of the overall system with the efficiency obtained on the basis of the simulation, coefficients ki determining the energy losses of individual elements of the system were calculated. The research showed a large convergence of the mathematical description of energy losses in the elements of the system and the efficiency of the system with reality. The mathematical model enables accurate simulation determination of the energy efficiency of the system at each point of its field of operation, i.e. at each speed and load of the controlled hydraulic motor. The range of motor speed and load variation can also be accurately determined simulationally.

Development of a method for multielemental determination in water by EDXRF with radioisotopic source of 238Pu.

2019 ◽  
Vol 7 (2A) ◽  
Author(s):  
Camilo Fuentes Serrano ◽  
Juan Reinaldo Estevez Alvares ◽  
Alfredo Montero Alvarez ◽  
Ivan Pupo Gonzales ◽  
Zahily Herrero Fernandez ◽  
...  
Keyword(s):  
Thin Layer ◽  
Expanded Uncertainty ◽  
Considerable Decrease ◽  
X Ray ◽  
Precipitation Efficiency ◽  
Method Of Determination ◽  
Sensitivity Curves ◽  
Order Of Magnitude ◽  
Metrological Parameters

A method for determination of Cr, Fe, Co, Ni, Cu, Zn, Hg and Pb in waters by Energy Dispersive X Ray Fluorescence (EDXRF) was implemented, using a radioisotopic source of 238Pu. For previous concentration was employed a procedure including a coprecipitation step with ammonium pyrrolidinedithiocarbamate (APDC) as quelant agent, the separation of the phases by filtration, the measurement of filter by EDXRF and quantification by a thin layer absolute method. Sensitivity curves for K and L lines were obtained respectively. The sensitivity for most elements was greater by an order of magnitude in the case of measurement with a source of 238Pu instead of 109Cd, which means a considerable decrease in measurement times. The influence of the concentration in the precipitation efficiency was evaluated for each element. In all cases the recoveries are close to 100%, for this reason it can be affirmed that the method of determination of the studied elements is quantitative. Metrological parameters of the method such as trueness, precision, detection limit and uncertainty were calculated. A procedure to calculate the uncertainty of the method was elaborated; the most significant source of uncertainty for the thin layer EDXRF method is associated with the determination of instrumental sensitivities. The error associated with the determination, expressed as expanded uncertainty (in %), varied from 15.4% for low element concentrations (2.5-5 μg/L) to 5.4% for the higher concentration range (20-25 μg/L).

Sign in / Sign up

Export Citation Format

Share Document