scholarly journals Validation of Sea-Surface Temperature Data for Potential OTEC Deployment in the Mexican Pacific

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1898
Author(s):  
Alejandro García Huante ◽  
Yandy Rodríguez Cueto ◽  
Ricardo Efraín Hernández Contreras ◽  
Erika Paola Garduño Ruíz ◽  
Miguel Ángel Alatorre Mendieta ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
World Ocean ◽  
Distribution Patterns ◽  
Sea Surface ◽  
Mexican Pacific ◽  
Significant Difference ◽  
World Ocean Atlas ◽  
Ocean Thermal Energy

As the operation of an ocean thermal energy conversion (OTEC) plant depends on the temperature gradient between the surface and deeper water (SST), a variation in SST can significantly modify the energy produced. The aim of this paper is to present a comparative analysis of three sea-surface temperature databases (World Ocean Atlas (WOA), Satellite Oceanic Monitoring System (SATMO), and in situ sensor measurements). Simple linear regression and graphic comparisons allow correlations to be made between the distribution patterns of the SST data. The results show that there is no statistically significant difference between the three databases. To determine general regions where OTEC implementation is possible, at the macroscale, the WOA database is recommended, as a smaller amount of data must be analyzed. For meso- and microscales, such as specific areas of the Mexican exclusive economic zone. It is better to use SATMO and in situ measurements as a higher spatial resolution is required.

scholarly journals Validation of Sea Surface Temperature from GCOM-C Satellite Using iQuam Datasets and MUR-SST in Indonesian Waters

2021 ◽  
Vol 53 (1) ◽  
Author(s):  
Bambang Sukresno ◽  
Dinarika Jatisworo ◽  
Rizki Hanintyo
Keyword(s):  
High Resolution ◽  
Error Analysis ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Important Variable ◽  
Sea Surface ◽  
Analysis Method ◽  
Validation Process ◽  
Indonesian Seas

Sea surface temperature (SST) is an important variable in oceanography. One of the SST data can be obtained from the Global Observation Mission-Climate (GCOM-C) satellite. Therefore, this data needs to be validated before being applied in various fields. This study aimed to validate SST data from the GCOM-C satellite in the Indonesian Seas. Validation was performed using the data of Multi-sensor Ultra-high Resolution sea surface temperature (MUR-SST) and in situ sea surface temperature Quality Monitor (iQuam). The data used are the daily GCOM-C SST dataset from January to December 2018, as well as the daily dataset from MUR-SST and iQuam in the same period. The validation process was carried out using the three-way error analysis method. The results showed that the accuracy of the GCOM-C SST was 0.37oC.

scholarly journals RETRIEVAL OF SEA SURFACE TEMPERATURE OVER POTERAN ISLAND WATER OF INDONESIA WITH LANDSAT 8 TIRS IMAGE: A PRELIMINARY ALGORITHM

2015 ◽  
Vol XL-2/W4 ◽  
pp. 87-90 ◽  
Author(s):  
M. A. Syariz ◽  
L. M. Jaelani ◽  
L. Subehi ◽  
A. Pamungkas ◽  
E. S. Koenhardono ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Brightness Temperature ◽  
Sea Surface ◽  
Coefficient Of Determination ◽  
Landsat 8 ◽  
In Situ Data ◽  
The North ◽  
Thermal Band

The Sea Surface Temperature (SST) retrieval from satellites data Thus, it could provide SST data for a long time. Since, the algorithms of SST estimation by using Landsat 8 Thermal Band are sitedependence, we need to develop an applicable algorithm in Indonesian water. The aim of this research was to develop SST algorithms in the North Java Island Water. The data used are in-situ data measured on April 22, 2015 and also estimated brightness temperature data from Landsat 8 Thermal Band Image (band 10 and band 11). The algorithm was established using 45 data by assessing the relation of measured in-situ data and estimated brightness temperature. Then, the algorithm was validated by using another 40 points. The results showed that the good performance of the sea surface temperature algorithm with coefficient of determination (<i>R</i><sup>2</sup>) and Root Mean Square Error (<i>RMSE</i>) of 0.912 and 0.028, respectively.

scholarly journals Adjusting for Desert-Dust-Related Biases in a Climate Data Record of Sea Surface Temperature

2020 ◽  
Vol 12 (16) ◽  
pp. 2554
Author(s):  
Christopher J. Merchant ◽  
Owen Embury
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Large Scale ◽  
Dust Aerosol ◽  
Sea Surface ◽  
Climate Data ◽  
Desert Dust ◽  
Data Record ◽  
Climate Data Record

Atmospheric desert-dust aerosol, primarily from north Africa, causes negative biases in remotely sensed climate data records of sea surface temperature (SST). Here, large-scale bias adjustments are deduced and applied to the v2 climate data record of SST from the European Space Agency Climate Change Initiative (CCI). Unlike SST from infrared sensors, SST measured in situ is not prone to desert-dust bias. An in-situ-based SST analysis is combined with column dust mass from the Modern-Era Retrospective analysis for Research and Applications, Version 2 to deduce a monthly, large-scale adjustment to CCI analysis SSTs. Having reduced the dust-related biases, a further correction for some periods of anomalous satellite calibration is also derived. The corrections will increase the usability of the v2 CCI SST record for oceanographic and climate applications, such as understanding the role of Arabian Sea SSTs in the Indian monsoon. The corrections will also pave the way for a v3 climate data record with improved error characteristics with respect to atmospheric dust aerosol.

scholarly journals Satellite-based time-series of sea-surface temperature since 1981 for climate applications

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Christopher J. Merchant ◽  
Owen Embury ◽  
Claire E. Bulgin ◽  
Thomas Block ◽  
Gary K. Corlett ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Ocean Model ◽  
Sea Surface ◽  
Climate Data ◽  
Satellite Measurements ◽  
Data Record ◽  
The Mean ◽  
Climate Data Record

Abstract A climate data record of global sea surface temperature (SST) spanning 1981–2016 has been developed from 4 × 1012 satellite measurements of thermal infra-red radiance. The spatial area represented by pixel SST estimates is between 1 km2 and 45 km2. The mean density of good-quality observations is 13 km−2 yr−1. SST uncertainty is evaluated per datum, the median uncertainty for pixel SSTs being 0.18 K. Multi-annual observational stability relative to drifting buoy measurements is within 0.003 K yr−1 of zero with high confidence, despite maximal independence from in situ SSTs over the latter two decades of the record. Data are provided at native resolution, gridded at 0.05° latitude-longitude resolution (individual sensors), and aggregated and gap-filled on a daily 0.05° grid. Skin SSTs, depth-adjusted SSTs de-aliased with respect to the diurnal cycle, and SST anomalies are provided. Target applications of the dataset include: climate and ocean model evaluation; quantification of marine change and variability (including marine heatwaves); climate and ocean-atmosphere processes; and specific applications in ocean ecology, oceanography and geophysics.

scholarly journals Evaluation of global monitoring and forecasting systems at Mercator Océan

Ocean Science ◽  
2013 ◽  
Vol 9 (1) ◽  
pp. 57-81 ◽  
Author(s):  
J.-M. Lellouche ◽  
O. Le Galloudec ◽  
M. Drévillon ◽  
C. Régnier ◽  
E. Greiner ◽  
...  
Keyword(s):  
Quality Control ◽  
Sea Ice ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Sea Surface ◽  
Altimeter Data ◽  
Open Boundary ◽  
Vertical Profiles ◽  
Validation Procedure

Abstract. Since December 2010, the MyOcean global analysis and forecasting system has consisted of the Mercator Océan NEMO global 1/4° configuration with a 1/12° nested model over the Atlantic and the Mediterranean. The open boundary data for the nested configuration come from the global 1/4° configuration at 20° S and 80° N. The data are assimilated by means of a reduced-order Kalman filter with a 3-D multivariate modal decomposition of the forecast error. It includes an adaptive-error estimate and a localization algorithm. A 3-D-Var scheme provides a correction for the slowly evolving large-scale biases in temperature and salinity. Altimeter data, satellite sea surface temperature and in situ temperature and salinity vertical profiles are jointly assimilated to estimate the initial conditions for numerical ocean forecasting. In addition to the quality control performed by data producers, the system carries out a proper quality control on temperature and salinity vertical profiles in order to minimise the risk of erroneous observed profiles being assimilated in the model. This paper describes the recent systems used by Mercator Océan and the validation procedure applied to current MyOcean systems as well as systems under development. The paper shows how refinements or adjustments to the system during the validation procedure affect its quality. Additionally, we show that quality checks (in situ, drifters) and data sources (satellite sea surface temperature) have as great an impact as the system design (model physics and assimilation parameters). The results of the scientific assessment are illustrated with diagnostics over the year 2010 mainly, assorted with time series over the 2007–2011 period. The validation procedure demonstrates the accuracy of MyOcean global products, whose quality is stable over time. All monitoring systems are close to altimetric observations with a forecast RMS difference of 7 cm. The update of the mean dynamic topography corrects local biases in the Indonesian Throughflow and in the western tropical Pacific. This improves also the subsurface currents at the Equator. The global systems give an accurate description of water masses almost everywhere. Between 0 and 500 m, departures from in situ observations rarely exceed 1 °C and 0.2 psu. The assimilation of an improved sea surface temperature product aims to better represent the sea ice concentration and the sea ice edge. The systems under development are still suffering from a drift which can only be detected by means of a 5-yr hindcast, preventing us from upgrading them in real time. This emphasizes the need to pursue research while building future systems for MyOcean2 forecasting.

scholarly journals Comparison of Satellite-Based Sea Surface Temperature to In Situ Observations Surrounding Coral Reefs in La Parguera, Puerto Rico

2020 ◽  
Vol 8 (6) ◽  
pp. 453
Author(s):  
Andrea M. Gomez ◽  
Kyle C. McDonald ◽  
Karsten Shein ◽  
Stephanie DeVries ◽  
Roy A. Armstrong ◽  
...  
Keyword(s):  
Puerto Rico ◽  
Coral Reefs ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Thermal Stresses ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Strong Positive Correlation ◽  
La Parguera

Coral reefs are among the most biologically diverse ecosystems on Earth. In the last few decades, a combination of stressors has produced significant declines in reef expanse, with declining reef health attributed largely to thermal stresses. We investigated the correspondence between time-series satellite remote sensing-based sea surface temperature (SST) datasets and ocean temperature monitored in situ at depth in coral reefs near La Parguera, Puerto Rico. In situ temperature data were collected for Cayo Enrique and Cayo Mario, San Cristobal, and Margarita Reef. The three satellite-based SST datasets evaluated were NOAA’s Coral Reef Watch (CoralTemp), the UK Meteorological Office’s Operational SST and Sea Ice Analysis (OSTIA), and NASA’s Jet Propulsion Laboratory (G1SST). All three satellite-based SST datasets assessed displayed a strong positive correlation (>0.91) with the in situ temperature measurements. However, all SST datasets underestimated the temperature, compared with the in situ measurements. A linear regression model using the SST datasets as the predictor for the in situ measurements produced an overall offset of ~1 °C for all three SST datasets. These results support the use of all three SST datasets, after offset correction, to represent the temperature regime at the depth of the corals in La Parguera, Puerto Rico.

scholarly journals Comparison of in situ time-series of temperature with gridded sea surface temperature datasets in the North Atlantic

2009 ◽  
Vol 66 (7) ◽  
pp. 1467-1479 ◽  
Author(s):  
Sarah L. Hughes ◽  
N. Penny Holliday ◽  
Eugene Colbourne ◽  
Vladimir Ozhigin ◽  
Hedinn Valdimarsson ◽  
...  
Keyword(s):  
Time Series ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
North Atlantic ◽  
Sea Surface ◽  
The North ◽  
Spatial Coverage ◽  
The North Atlantic

Abstract Hughes, S. L., Holliday, N. P., Colbourne, E., Ozhigin, V., Valdimarsson, H., Østerhus, S., and Wiltshire, K. 2009. Comparison of in situ time-series of temperature with gridded sea surface temperature datasets in the North Atlantic. – ICES Journal of Marine Science, 66: 1467–1479. Analysis of the effects of climate variability and climate change on the marine ecosystem is difficult in regions where long-term observations of ocean temperature are sparse or unavailable. Gridded sea surface temperature (SST) products, based on a combination of satellite and in situ observations, can be used to examine variability and long-term trends because they provide better spatial coverage than the limited sets of long in situ time-series. SST data from three gridded products (Reynolds/NCEP OISST.v2., Reynolds ERSST.v3, and the Hadley Centre HadISST1) are compared with long time-series of in situ measurements from ICES standard sections in the North Atlantic and Nordic Seas. The variability and trends derived from the two data sources are examined, and the usefulness of the products as a proxy for subsurface conditions is discussed.

Sign in / Sign up

Export Citation Format

Share Document