scholarly journals Performance Analysis and Comparison of a Concentrated Photovoltaic System with Different Phase Change Materials

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2911
Author(s):  
Jawad Sarwar ◽  
Muhammad Rizwan Shad ◽  
Arshmah Hasnain ◽  
Farman Ali ◽  
Konstantinos E. Kakosimos ◽  
...  
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Crystalline Silicon ◽  
Weather Conditions ◽  
Photovoltaic System ◽  
Pv System ◽  
System A ◽  
Change Material ◽  
Fully Coupled ◽  
Electrical Output

In this work, temperature regulation and electrical output of a concentrated photovoltaic system coupled with a phase change material (CPVPCM) system is investigated and compared with a single sun crystalline photovoltaic (PV) system. A fully coupled thermal-optical-electrical model has been developed in-house to conduct the simulation studies for actual weather conditions of Doha (Qatar) and selected phase change materials (PCMs). The selected PCMs are lauric acid, RT47, S-series salt, STL47, ClimSelTM C48, RT54, RT60, RT62, and RT64. An optical concentration ratio of 20× is considered on a 15 mm wide crystalline silicon cell. The temperature evolution, thermal energy storage and electrical output of the CPVPCM system are obtained for 48-hour simulations with representative weather conditions for each month of a typical meteorological year (TMY). Results and overall thermal and electrical efficiency are compared for each PCM. In brief, the CPVPCM system with S-series salt performs better than all other PCM with an overall efficiency of 54.4%. Furthermore, this system consistently produces more power than a PV system with an equal footprint (1 m2) for each month of the TMY.

scholarly journals Photovoltaic Cooling Utilizing Phase Change Materials

2020 ◽  
Vol 160 ◽  
pp. 02004
Author(s):  
Suhil Kiwan ◽  
Hisham Ahmad ◽  
Ammar Alkhalidi ◽  
Wahib O Wahib ◽  
Wael Al-Kouz
Keyword(s):  
Phase Change ◽  
Experimental Test ◽  
Phase Change Materials ◽  
Experimental Tests ◽  
Photovoltaic System ◽  
Cell Temperature ◽  
Average Cell ◽  
Solar Systems ◽  
Pv Panel ◽  
Change Material

A theoretical analysis based on mathematical formulations and experimental test to a photovoltaic system cooled by Phase Change Material (PCM) is carried out and documented. The PCM is attached to the back of the PV panel to control the temperature of cells in the PV panel. The experimental tests were done to solar systems with and without using PCM for comparison purposes. A PCM of paraffin graphite panels of thickness15 mm has covered the back of the panel. This layer was covered with an aluminum sheet fixed tightly to the panel frame. In the experimental test, it was found that when the average cell temperature exceeds the melting point temperature of the PCM, the efficiency of the system increases. However, when the cell temperature did not exceed the melting temperature of the PCM, the use of the PCM will affect negatively the system efficiency.

scholarly journals CFD Analysis of Phase Change Materials Integrated with Solar Photovoltaic Modules

2019 ◽  
Vol 9 (2S4) ◽  
pp. 523-527
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Heat Removal ◽  
Thermal Response ◽  
Weather Conditions ◽  
Ethylene Vinyl Acetate ◽  
Photovoltaic Cell ◽  
Rear Side ◽  
Pv System ◽  
Pv Panel

The electrical output decreases in the PV system due to the heat generation in photovoltaic (PV) cell. The part of PV heat formation can be removed through attachment of phase change materials (PCM) at rear side of the ethylene vinyl acetate (EVA). The paper explains the Temperature distribution in the PV modules and analysis was done with and without PCM in two different weather conditions. Then the PCM (Calcium chloride hexa-hydrate) is connected on the PV panel rear side to evaluate the different solar irradiance levels. In Literature it is observed that the heat removal of PCM capability is used to control the generation of heat of the PV system. Thus the current work is to investigate the effects of PCMs in photovoltaic cell which reduces its temperature and also the thermal response of PV-PCM system and various weather conditions are analysed.

Effect of phase change material integration in clay hollow brick composite in building envelope for thermal management of energy efficient buildings

2019 ◽  
Vol 43 (4) ◽  
pp. 351-364 ◽  
Author(s):  
S Kumar ◽  
S Arun Prakash ◽  
V Pandiyarajan ◽  
NB Geetha ◽  
V Antony Aroul Raj ◽  
...  
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Room Temperature ◽  
Phase Change Materials ◽  
Temperature Drop ◽  
Weather Conditions ◽  
Building Envelope ◽  
Hollow Brick ◽  
Chennai City ◽  
Change Material

The present trend in building research is to improve sustainability in building construction and operation. The development of new renewable technologies is essential to improve the sustainability and to reduce emissions. The incorporation of phase change materials in buildings is an effective way to reduce the room temperature fluctuations and cooling loads/heating loads. Although several works have been carried out in this field, a novel phase change material clay hollow-brick composite has been used in this work. This article discusses the research on investigating the thermal performance of phase change material integration in building walls. Two identical test rooms (3 m × 3 m × 3.65 m) were constructed to study the effect of phase change material integration in buildings. The experimental buildings were constructed for the warm and humid weather conditions of Chennai city, India. Phase change material integration in the building wall is beneficial for reduction of room temperature and provides passive cooling of the building. The temperature drop in a phase change material room compared with a non-phase change material room varies from 6°C to 2°C, during various months of the year. DESIGNBUILDER simulation was carried out for phase change material and non-phase change material buildings during the months of January, March, May, and July. The simulated room temperature variation follows the same pattern in these months.

scholarly journals Experimental Characterization of Phase Change Materials for Refrigeration Processes

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3033
Author(s):  
Anastasia Stamatiou ◽  
Lukas Müller ◽  
Roger Zimmermann ◽  
Jamie Hillis ◽  
David Oliver ◽  
...  
Keyword(s):  
Energy Density ◽  
Phase Change ◽  
Thermophysical Properties ◽  
Phase Change Materials ◽  
Cost Effective ◽  
Latent Heat Storage ◽  
Lower Energy Density ◽  
Change Material ◽  
Storage Units

Latent heat storage units for refrigeration processes are promising as alternatives to water/glycol-based storage due to their significantly higher energy densities, which would lead to more compact and potentially more cost-effective storages. In this study, important thermophysical properties of five phase change material (PCM) candidates are determined in the temperature range between −22 and −35 °C and their compatibility with relevant metals and polymers is investigated. The goal is to complement existing scattered information in literature and to apply a consistent testing methodology to all PCMs, to enable a more reliable comparison between them. More specifically, the enthalpy of fusion, melting point, density, compatibility with aluminum, copper, polyethylene (PE), polypropylene (PP), neoprene and butyl rubber, are experimentally determined for 1-heptanol, n-decane, propionic acid, NaCl/water mixtures, and Al(NO3)3/water mixtures. The results of the investigations reveal individual strengths and weaknesses of the five candidates. Further, 23.3 wt.% NaCl in water stands out for its very high volumetric energy density and n-decane follows with a lower energy density but better compatibility with surrounding materials and supercooling performance. The importance of using consistent methodologies to determine thermophysical properties when the goal is to compare PCM performance is highlighted.

scholarly journals Reviewing the Exergy Analysis of Solar Thermal Systems Integrated with Phase Change Materials

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 724
Author(s):  
Macmanus Chinenye Ndukwu ◽  
Lyes Bennamoun ◽  
Merlin Simo-Tagne
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Second Law Of Thermodynamics ◽  
Heat Transfer Fluid ◽  
Solar Still ◽  
Thermal Systems ◽  
Solar Systems ◽  
Exergy Balance ◽  
Change Material

The application of thermal storage materials in solar systems involves materials that utilize sensible heat energy, thermo-chemical reactions or phase change materials, such as hydrated salts, fatty acids paraffin and non-paraffin like glycerol. This article reviews the various exergy approaches that were applied for several solar systems including hybrid solar water heating, solar still, solar space heating, solar dryers/heaters and solar cooking systems. In fact, exergy balance was applied for the different components of the studied system with a particular attention given to the determination of the exergy efficiency and the calculation of the exergy during charging and discharging periods. The influence of the system configuration and heat transfer fluid was also emphasized. This review shows that not always the second law of thermodynamics was applied appropriately during modeling, such as how to consider heat charging and discharging periods of the tested phase change material. Accordingly, the possibility of providing with inappropriate or not complete results, was pointed.

Numerical Thermal Performance Investigation of an Electric Motor Passive Cooling System Employing Phase Change Materials

2021 ◽  
Author(s):  
Ali Deriszadeh ◽  
Filippo de Monte ◽  
Marco Villani
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Electric Motor ◽  
Phase Change Materials ◽  
Cooling System ◽  
Passive Cooling ◽  
Time Step ◽  
Cooling Performance ◽  
Passive Cooling System ◽  
Change Material

Abstract This study investigates the cooling performance of a passive cooling system for electric motor cooling applications. The metal-based phase change materials are used for cooling the motor and preventing its temperature rise. As compared to oil-based phase change materials, these materials have a higher melting point and thermal conductivity. The flow field and transient heat conduction are simulated using the finite volume method. The accuracy of numerical values obtained from the simulation of the phase change materials is validated. The sensitivity of the numerical results to the number of computational elements and time step value is assessed. The main goal of adopting the phase change material based passive cooling system is to maintain the operational motor temperature in the allowed range for applications with high and repetitive peak power demands such as electric vehicles by using phase change materials in cooling channels twisted around the motor. Moreover, this study investigates the effect of the phase change material container arrangement on the cooling performance of the under study cooling system.

Sign in / Sign up

Export Citation Format

Share Document