scholarly journals Technical Limits of Passivity-Based Control Gains for a Single-Phase Voltage Source Inverter

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4560
Author(s):  
Zbigniew Rymarski ◽  
Krzysztof Bernacki
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Dynamic Properties ◽  
Theoretical Calculations ◽  
Voltage Source ◽  
Switching Frequency ◽  
Voltage Source Inverters ◽  
Passivity Based Control ◽  
Index Value ◽  
Output Filter

Passivity-based control (PBC) seems to be predicted for the control algorithms in the voltage source inverters (VSI) for voltage backup systems. This paper presents limitations of the improved (IPBC) version of the PBC (directly measuring the output voltage) maximum voltage and current gains. In a microprocessor-controlled inverter, these depend on the PWM modulator dynamic properties, the switching frequency, the modulation index value (avoiding modulator saturation and enabling the rapid increase of the filter inductor current), and the parameters of the VSI output filter. A single switching period delay of the digital PWM modulator was considered in the theoretical calculations based on a discrete inverter model. The simulations for the standard nonlinear rectifier RC load enabled the initial adjustment of the IPBC border gains, which depended on the switching frequency. Some small harmonics oscillations of the output voltage were acceptable for the test rectifier RC load or dynamic load. However, oscillations of the inductor current increased the power losses in the coil core. Experimental verification of the simulation results using a laboratory VSI model is also presented.

A Structural-Algorithmic and Parametric Synthesis of Single-Phase Voltage Source Inverters for Increased Power Capacity

2021 ◽  
Vol 2 (2) ◽  
pp. 44-53
Author(s):  
GENNADY S. MYTSYK ◽  
◽  
ZAW HTET HEIN ◽  
Keyword(s):  
Energy Flow ◽  
Output Voltage ◽  
Power Plants ◽  
Single Phase ◽  
Voltage Source ◽  
Phase Voltage ◽  
Power Capacity ◽  
Voltage Source Inverters ◽  
Solar Power Plants ◽  
Output Filter

The recent interest of developers of new technology in studying a structural and algorithmic synthesis (SAS) of voltage source inverters (VSI) for solar power plants (SPP) is stemming from a growing need to solve problems in connection with the revealed new possibilities of converting energy flow (from DC to AC) with better energy efficiency by reducing the depth of its pulse modulation. This problem is solved by using more rational structural and algorithmic solutions. It is shown that for SPPs for a capacity of about 1 MW and more, it is more expedient to construct inverters based on the energy flow multichannel conversion principle. Given a limited power capacity of the transistor components, the application of this principle allows the problem to be solved in fact without using an output filter. The output voltage waveform is shaped using the energy flow pulse-amplitude modulation (PAM), and its M parts are summed in the output circuit by out using M winding transfilters (M-TF). The proposed method for carrying out combined SAS of single-phase voltage source inverters with multichannel conversion is considered, which consists in using an N-level single-phase VSI (N-SPVSI) in each of the M channels with the voltage levels optimized in terms of the minimum total harmonic distortion (THD). The resulting voltage of this class of single-phase inverters, designated as MxN-SPVSI, is formed by the corresponding phase shift of the channel voltages followed by summing the channel currents by M-TF. It is shown that the resulting output voltage levels are also close to their values optimized with respect to the minimum of the THD indicator. The results from a comparative analysis of two options — a single-channel 8-level inverter and a four-channel 8-level inverter are given. For the second option, only one intermediate voltage tap in the solar battery is required (instead of seven taps in the first option) along with modern transistor components that are available for practical implementation. In both options, the THD value less than 5% is obtained with almost no need of using an output filter. The presented results provide a certain information and methodological support for system designing of single-phase voltage source inverters as applied to the specific features of solar power plants. Three-phase inverters can be built on the basis of three single-phase inverters with galvanic isolation of the power sources for each phase.

scholarly journals Passivity-Based Control Design Methodology for UPS Systems

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4301 ◽  
Author(s):  
Rymarski ◽  
Bernacki ◽  
Dyga ◽  
Davari
Keyword(s):  
Output Voltage ◽  
Design Methodology ◽  
Control Design ◽  
Power Converter ◽  
Voltage Source ◽  
Phase Voltage ◽  
Nonlinear Load ◽  
Voltage Source Inverters ◽  
Three Phase ◽  
Passivity Based Control

This paper presents a passivity-based control (PBC) design methodology for three-phase voltage source inverters (VSI) for uninterruptable power supply (UPS) systems where reduced harmonic distortions for the nonlinear load, reduced output voltage overshoot, and a restricted settling time are required. The output filter design and modification for efficient control and existing challenges with the assignment of scaling coefficients of the output voltage, load, and inductor currents are addressed and analyzed. Notably, special attention is given to the modulator saturation issue through implementing an accurate converter model. Applications of the two versions of PBC in three-phase voltage source inverters using stationary αβ and rotating dq frames for a constant frequency of the output voltage are presented. Furthermore, the influence of the PBC parameters on the power converter performance is investigated. A comparative simulation and the experimental results validate the effectiveness of the presented passivity-based control design methodology.

scholarly journals Single-Phase Inverter Deadbeat Control with One-Carrier-Period Lag

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 154
Author(s):  
Wei Yao ◽  
Jiamin Cui ◽  
Wenxi Yao
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Harmonic Distortion ◽  
Voltage Source ◽  
Current Loop ◽  
Deadbeat Control ◽  
Additional Advantage ◽  
Power Sources ◽  
Pwm Inverter ◽  
Single Phase Inverter

This paper presents a novel digital control scheme for the regulation of single-phase voltage source pulse width modulation (PWM) inverters used in AC power sources. The proposed scheme adopts two deadbeat controllers to regulate the inner current loop and the outer voltage loop of the PWM inverter. For the overhead of digital processing, the change of duty of PWM lags one carrier period behind the sampling signal, which is modeled as a first-order lag unit in a discrete domain. Based on this precise modeling, the deadbeat controllers make the inverter get a fast dynamic response, so that the inverter’s output voltage is obtained with a very low total harmonic distortion (THD), even when the load is fluctuating. The parameter sensitivity of the deadbeat control was analyzed, which shows that the proposed deadbeat control system can operate stably when the LC filter’s parameters vary within the range allowed. The experimental results of a 2kW inverter prototype show that the THD of the output voltage is less than 3% under resistive and rectifier loads, which verifies the feasibility of the proposed scheme. An additional advantage of the proposed scheme is that the parameter design of the controller can be fully programmed without the experience of a designer.

scholarly journals Standalone Operation of Modified Seven-Level Packed U-Cell (MPUC) Single-Phase Inverter

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 268 ◽  
Author(s):  
Ali Shojaei ◽  
Bahram Najafi ◽  
Hani Vahedi
Keyword(s):  
Output Voltage ◽  
Single Phase ◽  
Multilevel Inverter ◽  
Switching Frequency ◽  
Voltage Waveform ◽  
Multilevel Inverters ◽  
Design Considerations ◽  
Single Phase Inverter ◽  
Load Types ◽  
Switch Voltage

In this paper the standalone operation of the modified seven-level Packed U-Cell (MPUC) inverter is presented and analyzed. The MPUC inverter has two DC sources and six switches, which generate seven voltage levels at the output. Compared to cascaded H-bridge and neutral point clamp multilevel inverters, the MPUC inverter generates a higher number of voltage levels using fewer components. The experimental results of the MPUC prototype validate the appropriate operation of the multilevel inverter dealing with various load types including motor, linear, and nonlinear ones. The design considerations, including output AC voltage RMS value, switching frequency, and switch voltage rating, as well as the harmonic analysis of the output voltage waveform, are taken into account to prove the advantages of the introduced multilevel inverter.

Sign in / Sign up

Export Citation Format

Share Document