scholarly journals Sub-Transient Response of the DSC Controlled Inverter under Fault

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4952
Author(s):  
Bane Popadic ◽  
Boris Dumnic ◽  
Dragan Milicevic ◽  
Luka Strezoski ◽  
Natasa Petrovic
Keyword(s):  
Distribution System ◽  
Renewable Energy Sources ◽  
Initial Response ◽  
Inrush Current ◽  
Peak Current ◽  
Laboratory Setup ◽  
Fault Ride Through ◽  
Classical Technique ◽  
Transient Period ◽  
Grid Connected Inverter

The most important element of the new active distribution system concept is the grid connected converter that needs to offer fault ride through capabilities. The new system topologies require new tools for fault state calculation that would consider different control methodologies. In that regard, this paper investigates the initial response of the grid connected inverter under fault that operates using new control methodology based on the integration of the delay signal cancellation. Using modern laboratory setup for testing of renewable energy sources and their integration in the power system the technique is weighed against the classical technique that does not provide the adequate control under unbalanced faults. Furthermore, through a set of specific experiments the paper demonstrates the behavior of the converter under fault, preparing the outline for the fault response modeling of distributed energy resources. Experimental results present the sub-transient period and the transient period of the response, giving the attention to the inrush current (initial peak current) of the converter. It has been shown that the new technique has similar behavior as the classical control for the balanced faults (symmetrical voltage states), while the values of the peak current for different type of unbalanced faults (asymmetrical voltages where classical technique can be proven to be ineffective) has also been demonstrated.

An Identification Method of Magnetizing Inrush Current Phenomena in Distribution System

2010 ◽  
Vol 130 (4) ◽  
pp. 430-436 ◽  
Author(s):  
Naoki Dou ◽  
Atushi Toyama ◽  
Kohki Satoh ◽  
Tadashi Naitoh ◽  
Kazuyuki Masaki
Keyword(s):  
Distribution System ◽  
Inrush Current ◽  
Identification Method ◽  
Magnetizing Inrush Current

An Improved Identification Method of Magnetizing Inrush Current Phenomena in Distribution System

2012 ◽  
Vol 132 (3) ◽  
pp. 260-267 ◽  
Author(s):  
Tatsuhiko Maeda ◽  
Tadashi Naitoh ◽  
Atsushi Toyama ◽  
Keiki Takeda
Keyword(s):  
Distribution System ◽  
Inrush Current ◽  
Identification Method ◽  
Magnetizing Inrush Current

Economic and environmental aspects of Smart Grid technologies implementation in Ukraine

2020 ◽  
pp. 28-37
Author(s):  
Oleksandra V. Kubatko ◽  
Diana O. Yaryomenko ◽  
Mykola O. Kharchenko ◽  
Ismail Y. A. Almashaqbeh
Keyword(s):  
Smart Grid ◽  
Environmental Sustainability ◽  
Distribution System ◽  
Energy Security ◽  
Smart Grids ◽  
Renewable Energy Sources ◽  
Average Energy ◽  
Time Of Day ◽  
Electricity Supply ◽  
Auxiliary Equipment

Interruptions in electricity supply may have a series of failures that can affect banking, telecommunications, traffic, and safety sectors. Due to the two-way interactive abilities, Smart Grid allows consumers to automatically redirect on failure, or shut down of the equipment. Smart Grid technologies are the costly ones; however, due to the mitigation of possible problems, they are economically sound. Smart grids can't operate without smart meters, which may easily transmit real-time power consumption data to energy data centers, helping the consumer to make effective decisions about how much energy to use and at what time of day. Smart Grid meters do allow the consumer to track and reduce energy consumption bills during peak hours and increase the corresponding consumption during minimum hours. At a higher level of management (e.g., on the level of separate region or country), the Smart Grid distribution system operators have the opportunity to increase the reliability of power supply primarily by detecting or preventing emergencies. Ukraine's energy system is currently outdated and cannot withstand current loads. High levels of wear of the main and auxiliary equipment of the power system and uneven load distribution in the network often lead to emergencies and power outages. The Smart Grid achievements and energy sustainability are also related to the energy trilemma, which consists of key core dimensions– Energy Security, Energy Equity, and Environmental Sustainability. To be competitive in the world energy market, the country has to organize efficiently the cooperation of public/private actors, governments, economic and social agents, environmental issues, and individual consumer behaviors. Ukraine gained 61 positions out of 128 countries in a list in 2019 on the energy trilemma index. In general, Ukraine has a higher than average energy security position and lower than average energy equity, and environmental sustainability positions. Given the fact that the number of renewable energy sources is measured in hundreds and thousands, network management is complicated and requires a Smart Grid rapid response. Keywords: economic development, Smart Grid, electricity supply, economic and environmental efficiency.

scholarly journals A Two-Step State Estimation Algorithm for Hybrid AC-DC Distribution Grids

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1967
Author(s):  
Gaurav Kumar Roy ◽  
Marco Pau ◽  
Ferdinanda Ponci ◽  
Antonello Monti
Keyword(s):  
State Estimation ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Estimation Algorithm ◽  
The State ◽  
Second Step ◽  
Distribution Grid ◽  
Dc Distribution ◽  
Attractive Option ◽  
Distribution Grids

Direct Current (DC) grids are considered an attractive option for integrating high shares of renewable energy sources in the electrical distribution grid. Hence, in the future, Alternating Current (AC) and DC systems could be interconnected to form hybrid AC-DC distribution grids. This paper presents a two-step state estimation formulation for the monitoring of hybrid AC-DC grids. In the first step, state estimation is executed independently for the AC and DC areas of the distribution system. The second step refines the estimation results by exchanging boundary quantities at the AC-DC converters. To this purpose, the modulation index and phase angle control of the AC-DC converters are integrated into the second step of the proposed state estimation formulation. This allows providing additional inputs to the state estimation algorithm, which eventually leads to improve the accuracy of the state estimation results. Simulations on a sample AC-DC distribution grid are performed to highlight the benefits resulting from the integration of these converter control parameters for the estimation of both the AC and DC grid quantities.

scholarly journals Rooftop Solar PV Penetration Impacts on Distribution Network and Further Growth Factors—A Comprehensive Review

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 55
Author(s):  
Busra Uzum ◽  
Ahmet Onen ◽  
Hany M. Hasanien ◽  
S. M. Muyeen
Keyword(s):  
Solar Energy ◽  
Power Quality ◽  
Distribution System ◽  
Renewable Energy Sources ◽  
Distribution Network ◽  
System Stability ◽  
Solar Pv ◽  
Voltage Quality ◽  
Solution Methods ◽  
Pv Penetration

In order to meet the electricity needs of domestic or commercial buildings, solar energy is more attractive than other renewable energy sources in terms of its simplicity of installation, less dependence on the field and its economy. It is possible to extract solar energy from photovoltaic (PV) including rooftop, ground-mounted, and building integrated PV systems. Interest in rooftop PV system applications has increased in recent years due to simple installation and not occupying an external area. However, the negative effects of increased PV penetration on the distribution system are troublesome. The power loss, reverse power flow (RPF), voltage fluctuations, voltage unbalance, are causing voltage quality problems in the power network. On the other hand, variations in system frequency, power factor, and harmonics are affecting the power quality. The excessive PV penetration also the root cause of voltage stability and has an adverse effect on protection system. The aim of this article is to extensively examines the impacts of rooftop PV on distribution network and evaluate possible solution methods in terms of the voltage quality, power quality, system protection and system stability. Moreover, it is to present a comparison of the advantages/disadvantages of the solution methods discussed, and an examination of the solution methods in which artificial intelligence, deep learning and machine learning based optimization and techniques are discussed with common methods.

Analysing integration issues of the microgrid system with utility grid network

2021 ◽  
Vol 22 (1) ◽  
pp. 113-127
Author(s):  
Mulualem Tesfaye ◽  
Baseem Khan ◽  
Om Prakash Mahela ◽  
Hassan Haes Alhelou ◽  
Neeraj Gupta ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Distribution System ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Operating Conditions ◽  
Control Mode ◽  
Voltage Source ◽  
Modulation Scheme ◽  
Main Challenge ◽  
Utility Grid

Abstract Generation of renewable energy sources and their interfacing to the main system has turn out to be most fascinating challenge. Renewable energy generation requires stable and reliable incorporation of energy to the low or medium voltage networks. This paper presents the microgrid modeling as an alternative and feasible power supply for Institute of Technology, Hawassa University, Ethiopia. This microgrid consists of a 60 kW photo voltaic (PV) and a 20 kW wind turbine (WT) system; that is linked to the electrical distribution system of the campus by a 3-phase pulse width modulation scheme based voltage source inverters (VSI) and supplying power to the university buildings. The main challenge in this work is related to the interconnection of microgrid with utility grid, using 3-phase VSI controller. The PV and WT of the microgrid are controlled in active and reactive power (PQ) control mode during grid connected operation and in voltage/frequency (V/F) control mode, when the microgrid is switched to the stand-alone operation. To demonstrate the feasibility of proposed microgrid model, MATLAB/Simulink software has been employed. The performance of fully functioning microgrid is analyzed and simulated for a number of operating conditions. Simulation results supported the usefulness of developed microgrid in both mode of operation.

Sign in / Sign up

Export Citation Format

Share Document