scholarly journals Life-Cycle Carbon Emissions and Energy Implications of High Penetration of Photovoltaics and Electric Vehicles in California

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5165
Author(s):  
Marco Raugei ◽  
Alessio Peluso ◽  
Enrica Leccisi ◽  
Vasilis Fthenakis
Keyword(s):  
Life Cycle ◽  
Electric Vehicles ◽  
Carbon Emissions ◽  
Lithium Ion ◽  
Net Energy ◽  
Low Carbon ◽  
High Penetration ◽  
Original Grid ◽  
Carbon Performance ◽  
High Level

California has set two ambitious targets aimed at achieving a high level of decarbonization in the coming decades, namely (i) to generate 60% and 100% of its electricity using renewable energy (RE) technologies, respectively, by 2030 and by 2045, and (ii) introducing at least 5 million zero emission vehicles (ZEVs) by 2030, as a first step towards all new vehicles being ZEVs by 2035. In addition, in California, photovoltaics (PVs) coupled with lithium-ion battery (LIB) storage and battery electric vehicles (BEVs) are, respectively, the most promising candidates for new RE installations and new ZEVs, respectively. However, concerns have been voiced about how meeting both targets at the same time could potentially negatively affect the electricity grid’s stability, and hence also its overall energy and carbon performance. This paper addresses those concerns by presenting a thorough life-cycle carbon emission and energy analysis based on an original grid balancing model that uses a combination of historical hourly dispatch and demand data and future projections of hourly demand for BEV charging. Five different scenarios are assessed, and the results unequivocally indicate that a future 80% RE grid mix in California is not only able to cope with the increased demand caused by BEVs, but it can do so with low carbon emissions (<110 g CO2-eq/kWh) and satisfactory net energy returns (EROIPE-eq = 12–16).

scholarly journals Carbon Emission Estimation of Assembled Composite Concrete Beams during Construction

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1810
Author(s):  
Kaitong Xu ◽  
Haibo Kang ◽  
Wei Wang ◽  
Ping Jiang ◽  
Na Li
Keyword(s):  
Life Cycle ◽  
Carbon Emissions ◽  
Emission Reduction ◽  
Carbon Emission ◽  
Composite Beams ◽  
Total Carbon ◽  
Construction Process ◽  
Low Carbon ◽  
Carbon Emission Reduction ◽  
The Government

At present, the issue of carbon emissions from buildings has become a hot topic, and carbon emission reduction is also becoming a political and economic contest for countries. As a result, the government and researchers have gradually begun to attach great importance to the industrialization of low-carbon and energy-saving buildings. The rise of prefabricated buildings has promoted a major transformation of the construction methods in the construction industry, which is conducive to reducing the consumption of resources and energy, and of great significance in promoting the low-carbon emission reduction of industrial buildings. This article mainly studies the calculation model for carbon emissions of the three-stage life cycle of component production, logistics transportation, and on-site installation in the whole construction process of composite beams for prefabricated buildings. The construction of CG-2 composite beams in Fujian province, China, was taken as the example. Based on the life cycle assessment method, carbon emissions from the actual construction process of composite beams were evaluated, and that generated by the composite beam components during the transportation stage by using diesel, gasoline, and electric energy consumption methods were compared in detail. The results show that (1) the carbon emissions generated by composite beams during the production stage were relatively high, accounting for 80.8% of the total carbon emissions, while during the transport stage and installation stage, they only accounted for 7.6% and 11.6%, respectively; and (2) during the transportation stage with three different energy-consuming trucks, the carbon emissions from diesel fuel trucks were higher, reaching 186.05 kg, followed by gasoline trucks, which generated about 115.68 kg; electric trucks produced the lowest, only 12.24 kg.

scholarly journals Advances of 2nd Life Applications for Lithium Ion Batteries from Electric Vehicles Based on Energy Demand

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich
Keyword(s):  
Life Cycle ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Energy Demand ◽  
Lithium Ion ◽  
Life Cycles ◽  
Future Research ◽  
Research Areas ◽  
Study Results ◽  
The Impact

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.

Life Cycle Assessment of Silicon-Nanotube-Based Lithium Ion Battery for Electric Vehicles

2018 ◽  
Vol 7 (1) ◽  
pp. 599-610 ◽  
Author(s):  
Yelin Deng ◽  
Lulu Ma ◽  
Tonghui Li ◽  
Jianyang Li ◽  
Chris Yuan
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Lithium Ion Battery ◽  
Electric Vehicles ◽  
Lithium Ion ◽  
Silicon Nanotube

scholarly journals Research on Carbon Emissions of Electric Vehicles throughout the Life Cycle Assessment Taking into Vehicle Weight and Grid Mix Composition

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3612 ◽  
Author(s):  
Yanmei Li ◽  
Ningning Ha ◽  
Tingting Li
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Electric Vehicles ◽  
Carbon Emissions ◽  
Linear Regression Analysis ◽  
Clean Energy ◽  
Assessment Method ◽  
Weight Class ◽  
Vehicle Weight ◽  
The Impact

To study the impact of the promotion of electric vehicles on carbon emissions in China, the full life carbon emissions of electric vehicles are studied on the basis of considering such factors as vehicle weight and grid mix composition, and fuel vehicles are added for comparison. In this paper, we collect data for 34 domestic electric vehicles, and linear regression analysis is used to model the relationship between vehicle weight and energy consumption. Then, a Hybrid Life Cycle Assessment method is used to establish the life cycle carbon emission calculation model for electric vehicles and fuel vehicles. Finally, the life cycle carbon emissions of electric vehicles and fuel vehicles under different electrical energy structures are discussed using scenario analysis. The results show that under the current grid mix composition in China, the carbon emissions of electric vehicles of the same vehicle weight class are 24% to 31% higher than that of fuel vehicles. As the proportion of clean energy in the grid mix composition increases, the advantages of electric vehicles to reduce carbon emissions will gradually emerge.

scholarly journals Sustainable Reuse of Military Facilities with a Carbon Inventory: Kinmen, Taiwan

2019 ◽  
Vol 11 (6) ◽  
pp. 1810
Author(s):  
Hua-Yueh Liu
Keyword(s):  
Life Cycle ◽  
Carbon Footprint ◽  
Carbon Emissions ◽  
Building Materials ◽  
Cell System ◽  
Military Government ◽  
Low Carbon ◽  
Water Shortages ◽  
Military Facilities ◽  
Construction Operation

Military government was lifted from Kinmen in 1992. The opening-up of cross-strait relations transformed the island into a tourist destination. This transformation led to electricity and water shortages in Kinmen. With the reduction in the number of troops, military facilities fell into disuse and are now being released for local government use. The aim of this project was to monitor the carbon footprint of a reused military facility during renovation of the facility. The LCBA-Neuma system, a local carbon survey software developed by the Low Carbon Building Alliance (LCBA) and National Cheng Kung University in Taiwan, was used in this project. The system analyzes the carbon footprint of the various phases of the building life cycle (LC) during renovation and carbon compensation strategies were employed to achieve the low carbon target. This project has pioneered the transformation of a disused military facility using this approach. The carbon footprint of energy uses during post-construction operation (CFeu) accounted for the majority of carbon emissions among all stages, at 1,088,632.19 kgCO2e/60y, while the carbon footprint of the new building materials (CFm) was the second highest, at 214,983.66 kgCO2e/60y. Installation of a solar cell system of 25.2 kWp on the rooftop as a carbon offset measure compensated for an estimated 66.1% of the total life-cycle carbon emissions. The findings of this study show that the process of reusing old military facilities can achieve the ultimate goal of zero carbon construction and sustainable development.

scholarly journals Towards net-zero carbon performance: using demand side management and a low carbon grid to reduce operational carbon emissions in a UK public office

2021 ◽  
Vol 2069 (1) ◽  
pp. 012150
Author(s):  
E Burman ◽  
N Jain ◽  
M de-Borja-Torrejón
Keyword(s):  
Carbon Emissions ◽  
Demand Side Management ◽  
Carbon Intensity ◽  
Grid Integration ◽  
Demand Side ◽  
Low Carbon ◽  
Electricity Grid ◽  
Integration Strategy ◽  
Carbon Performance ◽  
And Control

Abstract This paper investigates the performance of an office building that has achieved a low carbon performance in practice thanks to a performance contract and Soft Landings approach. The findings show the potential of this building for further de-carbonisation as a result of electrification of heating and load shifting to take advantage of a low carbon electricity grid. Whilst retrospective modelling based on the past carbon intensity data shows the effectiveness of demand-side management, assessment of the existing smart readiness of the building revealed that the building services and control strategy are not fully equipped with the data analytics and carbon or price signal responsiveness required to facilitate grid integration. The environmental strategy and procurement method used for this building combined with an effective grid integration strategy can serve as a prototype for low carbon design to achieve the ever stringent carbon emissions objectives set out for the non-domestic buildings.

scholarly journals Low-carbon design for product packaging: a case study on wineglass

2020 ◽  
Author(s):  
Feng Xu ◽  
Jiao-Jing Pan
Keyword(s):  
Material Processing ◽  
Life Cycle ◽  
Carbon Emissions ◽  
Raw Material ◽  
Low Carbon ◽  
Product Packaging ◽  
Packaging Industry ◽  
The Difference ◽  
Packaging Structure

Abstract The study on carbon emissions in packaging industry is a very important but easily overlooked field. In order to explore carbon emissions of the packaging life cycle, the wineglass is used as the packaging object to discuss the difference between carbon emissions and costs caused by two new packaging structures and a common packaging structure on the market. The measurement boundary includes raw material collection, raw material processing, packaging manufacturing, transportation and end of life. It was found that reasonable packaging structure instead the buffer function of expanded polyethylene can effectively reduce the carbon emissions and costs.

Sign in / Sign up

Export Citation Format

Share Document