scholarly journals Composite Estimators for Growth Derived from Repeated Plot Measurements of Positively-Asymmetric Interval Lengths

Forests ◽  
2018 ◽  
Vol 9 (7) ◽  
pp. 427 ◽  
Author(s):  
Francis Roesch
Keyword(s):  
Data Aggregation ◽  
Forest Inventory ◽  
National Forest Inventory ◽  
Statistical Properties ◽  
National Forest ◽  
Forest Inventory And Analysis ◽  
User Expectations ◽  
Standard Set ◽  
Definition Of ◽  
Interval Lengths

The statistical properties of candidate methods to adjust for the bias in growth estimates obtained from observations on increasing interval lengths are compared and contrasted against a standard set of estimands. This standard set of estimands is offered here as a solution to a varying set of user expectations that can arise from the jargon surrounding a particular data aggregation procedure developed within the USDA’s Forest Inventory and Analysis Program, specifically the term “average annual” growth. The definition of a standard set of estimands also allows estimators to be defined and the statistical properties of those estimators to be evaluated. The estimators are evaluated in a simulation for their effectiveness in the presence of a simple distribution of positively-asymmetric measurement intervals, such as what might arise subsequent to a reduction in budget being applied to a national forest inventory.

Statistical Properties of Alternative National Forest Inventory Area Estimators

2012 ◽  
Vol 58 (6) ◽  
pp. 559-566 ◽  
Author(s):  
Francis A. Roesch ◽  
John W. Coulston ◽  
Andrew D. Hill
Keyword(s):  
Forest Inventory ◽  
National Forest Inventory ◽  
Statistical Properties ◽  
National Forest

Applications of the United States Forest Inventory and Analysis dataset: a review and future directions

2018 ◽  
Vol 48 (11) ◽  
pp. 1251-1268 ◽  
Author(s):  
Wade T. Tinkham ◽  
Patrick R. Mahoney ◽  
Andrew T. Hudak ◽  
Grant M. Domke ◽  
Mike J. Falkowski ◽  
...  
Keyword(s):  
United States ◽  
Forest Inventory ◽  
The United States ◽  
National Forest Inventory ◽  
Forest Resources ◽  
Climate Impacts ◽  
Permanent Plots ◽  
National Forest ◽  
Forest Inventory And Analysis ◽  
Research Areas

The United States Forest Inventory and Analysis (FIA) program has been monitoring national forest resources in the United States for over 80 years; presented here is a synthesis of research applications for FIA data. A review of over 180 publications that directly utilize FIA data is broken down into broad categories of application and further organized by methodologies and niche research areas. The FIA program provides the most comprehensive forest database currently available, with permanent plots distributed across all forested lands and ownerships in the United States and plot histories dating back to the early 1930s. While the data can be incredibly powerful, users need to understand the spatial resolution of ground-based plots and the nature of the FIA plot coordinate system must be applied correctly. As the need for accurate assessments of national forest resources continues to be a global priority, particularly related to carbon dynamics and climate impacts, such national forest inventories will continue to be an important source of information on the status of and trends in these ecosystems. The advantages and limitations of FIA’s national forest inventory data are highlighted, and suggestions for further expansion of the FIA program are provided.

scholarly journals Land category in the National Forest Inventory of the Czech Republic

2010 ◽  
Vol 58 (5) ◽  
pp. 223-232
Author(s):  
Miloš Kučera
Keyword(s):  
Czech Republic ◽  
Forest Inventory ◽  
National Forest Inventory ◽  
National Forest ◽  
Special Focus ◽  
Land Classification ◽  
The Czech Republic ◽  
Definition Of

The article deals with the land categorization with special focus on the definition of category FO­REST in the National Forest Inventory of the Czech Republic (NFI CR). Definitions of land categories used in the first cycle of forest inventory in 2001–2004 are evaluated. The first task is to assess the appropriateness of existing land categorization and definition of category FOREST in terms of suitability of used parameters defining individual categories and their values. Their compatibility with international definitions of category FOREST is also assessed. The second task is, based on data from the first cycle of NFI CR, to calculate the area of category FOREST according to the international definition of European National Forest Inventory Network (ENFIN) and to determine whether the area of category FOREST is the same or varies from the area according to the definition FOREST defined in NFI CR.In the first part there is a list of used land classifications in the Czech Republic and there are also described used international classifications. Land categorization and definitions according ENFIN are presented. Further the parameters are chosen in the national definition of NFI CR, which are compared with analogous parameters defined by ENFIN, indicating differences. Subsequently, the area of category FOREST is calculated according to the parameters of national definition and ENFIN definition. Finally, suggestions are given for the land classification into categories for the second cycle of NFI CR, including the appropriate parameters and their values for the definition of category FOREST. Possible ways of their implementation into the methodology of NFI CR are listed.

Steigende Bestandszahlen bei Spechten und anderen Vogelarten dank Zunahme von Totholz? | An increase in the population of woodpeckers and other bird species thanks to an increase in the quantities of deadwood?

2009 ◽  
Vol 160 (11) ◽  
pp. 334-340 ◽  
Author(s):  
Pierre Mollet ◽  
Niklaus Zbinden ◽  
Hans Schmid
Keyword(s):  
Forest Inventory ◽  
Bird Species ◽  
National Forest Inventory ◽  
Population Increase ◽  
National Forest ◽  
Forest Species ◽  
Breeding Populations ◽  
Willow Tit ◽  
Middle Spotted Woodpecker ◽  
Important Habitat

Results from the monitoring programs of the Swiss Ornithological Institute show that the breeding populations of several forest species for which deadwood is an important habitat element (black woodpecker, great spotted woodpecker, middle spotted woodpecker, lesser spotted woodpecker, green woodpecker, three-toed woodpecker as well as crested tit, willow tit and Eurasian tree creeper) have increased in the period 1990 to 2008, although not to the same extent in all species. At the same time the white-backed woodpecker extended its range in eastern Switzerland. The Swiss National Forest Inventory shows an increase in the amount of deadwood in forests for the same period. For all the mentioned species, with the exception of green and middle spotted woodpecker, the growing availability of deadwood is likely to be the most important factor explaining this population increase.

scholarly journals A multi-purpose National Forest Inventory in Bangladesh: design, operationalisation and key results

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Matieu Henry ◽  
Zaheer Iqbal ◽  
Kristofer Johnson ◽  
Mariam Akhter ◽  
Liam Costello ◽  
...  
Keyword(s):  
Climate Change ◽  
Forest Management ◽  
Data Collection ◽  
Land Cover ◽  
Forest Inventory ◽  
Sustainable Forest Management ◽  
National Forest Inventory ◽  
Forest Resources ◽  
National Forest ◽  
Land Cover Map

Abstract Background National forest inventory and forest monitoring systems are more important than ever considering continued global degradation of trees and forests. These systems are especially important in a country like Bangladesh, which is characterised by a large population density, climate change vulnerability and dependence on natural resources. With the aim of supporting the Government’s actions towards sustainable forest management through reliable information, the Bangladesh Forest Inventory (BFI) was designed and implemented through three components: biophysical inventory, socio-economic survey and remote sensing-based land cover mapping. This article documents the approach undertaken by the Forest Department under the Ministry of Environment, Forests and Climate Change to establish the BFI as a multipurpose, efficient, accurate and replicable national forest assessment. The design, operationalization and some key results of the process are presented. Methods The BFI takes advantage of the latest and most well-accepted technological and methodological approaches. Importantly, it was designed through a collaborative process which drew from the experience and knowledge of multiple national and international entities. Overall, 1781 field plots were visited, 6400 households were surveyed, and a national land cover map for the year 2015 was produced. Innovative technological enhancements include a semi-automated segmentation approach for developing the wall-to-wall land cover map, an object-based national land characterisation system, consistent estimates between sample-based and mapped land cover areas, use of mobile apps for tree species identification and data collection, and use of differential global positioning system for referencing plot centres. Results Seven criteria, and multiple associated indicators, were developed for monitoring progress towards sustainable forest management goals, informing management decisions, and national and international reporting needs. A wide range of biophysical and socioeconomic data were collected, and in some cases integrated, for estimating the indicators. Conclusions The BFI is a new information source tool for helping guide Bangladesh towards a sustainable future. Reliable information on the status of tree and forest resources, as well as land use, empowers evidence-based decision making across multiple stakeholders and at different levels for protecting natural resources. The integrated socio-economic data collected provides information about the interactions between people and their tree and forest resources, and the valuation of ecosystem services. The BFI is designed to be a permanent assessment of these resources, and future data collection will enable monitoring of trends against the current baseline. However, additional institutional support as well as continuation of collaboration among national partners is crucial for sustaining the BFI process in future.

scholarly journals Mapping forest age using National Forest Inventory, airborne laser scanning, and Sentinel-2 data

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Johannes Schumacher ◽  
Marius Hauglin ◽  
Rasmus Astrup ◽  
Johannes Breidenbach
Keyword(s):  
Forest Inventory ◽  
Regression Models ◽  
Laser Scanning ◽  
Site Index ◽  
National Forest Inventory ◽  
Airborne Laser Scanning ◽  
National Forest ◽  
Practical Applications ◽  
Airborne Laser ◽  
Sentinel 2

Abstract Background The age of forest stands is critical information for forest management and conservation, for example for growth modelling, timing of management activities and harvesting, or decisions about protection areas. However, area-wide information about forest stand age often does not exist. In this study, we developed regression models for large-scale area-wide prediction of age in Norwegian forests. For model development we used more than 4800 plots of the Norwegian National Forest Inventory (NFI) distributed over Norway between latitudes 58° and 65° N in an 18.2 Mha study area. Predictor variables were based on airborne laser scanning (ALS), Sentinel-2, and existing public map data. We performed model validation on an independent data set consisting of 63 spruce stands with known age. Results The best modelling strategy was to fit independent linear regression models to each observed site index (SI) level and using a SI prediction map in the application of the models. The most important predictor variable was an upper percentile of the ALS heights, and root mean squared errors (RMSEs) ranged between 3 and 31 years (6% to 26%) for SI-specific models, and 21 years (25%) on average. Mean deviance (MD) ranged between − 1 and 3 years. The models improved with increasing SI and the RMSEs were largest for low SI stands older than 100 years. Using a mapped SI, which is required for practical applications, RMSE and MD on plot level ranged from 19 to 56 years (29% to 53%), and 5 to 37 years (5% to 31%), respectively. For the validation stands, the RMSE and MD were 12 (22%) and 2 years (3%), respectively. Conclusions Tree height estimated from airborne laser scanning and predicted site index were the most important variables in the models describing age. Overall, we obtained good results, especially for stands with high SI. The models could be considered for practical applications, although we see considerable potential for improvements if better SI maps were available.

scholarly journals Classifying Forest Type in the National Forest Inventory Context with Airborne Hyperspectral and Lidar Data

2021 ◽  
Vol 13 (10) ◽  
pp. 1863
Author(s):  
Caileigh Shoot ◽  
Hans-Erik Andersen ◽  
L. Monika Moskal ◽  
Chad Babcock ◽  
Bruce D. Cook ◽  
...  
Keyword(s):  
Random Forest ◽  
Forest Inventory ◽  
Forest Type ◽  
Vegetation Indices ◽  
National Forest Inventory ◽  
Classification Algorithm ◽  
Lidar Data ◽  
National Forest ◽  
Interior Alaska ◽  
Type Information

Forest structure and composition regulate a range of ecosystem services, including biodiversity, water and nutrient cycling, and wood volume for resource extraction. Forest type is an important metric measured in the US Forest Service Forest Inventory and Analysis (FIA) program, the national forest inventory of the USA. Forest type information can be used to quantify carbon and other forest resources within specific domains to support ecological analysis and forest management decisions, such as managing for disease and pests. In this study, we developed a methodology that uses a combination of airborne hyperspectral and lidar data to map FIA-defined forest type between sparsely sampled FIA plot data collected in interior Alaska. To determine the best classification algorithm and remote sensing data for this task, five classification algorithms were tested with six different combinations of raw hyperspectral data, hyperspectral vegetation indices, and lidar-derived canopy and topography metrics. Models were trained using forest type information from 632 FIA subplots collected in interior Alaska. Of the thirty model and input combinations tested, the random forest classification algorithm with hyperspectral vegetation indices and lidar-derived topography and canopy height metrics had the highest accuracy (78% overall accuracy). This study supports random forest as a powerful classifier for natural resource data. It also demonstrates the benefits from combining both structural (lidar) and spectral (imagery) data for forest type classification.

Assessing forest resource damage following natural disasters using national forest inventory plots

2022 ◽  
Author(s):  
Tom Brandeis ◽  
Jeffery Turner ◽  
Andrés Baeza Motes ◽  
Mark Brown ◽  
Samuel Lambert
Keyword(s):  
Natural Disasters ◽  
Forest Inventory ◽  
National Forest Inventory ◽  
National Forest ◽  
Forest Resource
Sign in / Sign up

Export Citation Format

Share Document