scholarly journals Turbulence Modeling Effects on the CFD Predictions of Flow over a Detailed Full-Scale Sedan Vehicle

Fluids ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 148 ◽  
Author(s):  
Chunhui Zhang ◽  
Charles Patrick Bounds ◽  
Lee Foster ◽  
Mesbah Uddin
Keyword(s):  
Turbulence Modeling ◽  
Computational Cost ◽  
Turbulence Models ◽  
Relative Magnitude ◽  
Full Scale ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Rans Turbulence Models ◽  
Rans Models

In today’s road vehicle design processes, Computational Fluid Dynamics (CFD) has emerged as one of the major investigative tools for aerodynamics analyses. The age-old CFD methodology based on the Reynolds Averaged Navier–Stokes (RANS) approach is still considered as the most popular turbulence modeling approach in automotive industries due to its acceptable accuracy and affordable computational cost for predicting flows involving complex geometries. This popular use of RANS still persists in spite of the well-known fact that, for automotive flows, RANS turbulence models often fail to characterize the associated flow-field properly. It is even true that more often, the RANS approach fails to predict correct integral aerodynamic quantities like lift, drag, or moment coefficients, and as such, they are used to assess the relative magnitude and direction of a trend. Moreover, even for such purposes, notable disagreements generally exist between results predicted by different RANS models. Thanks to fast advances in computer technology, increasing popularity has been seen in the use of the hybrid Detached Eddy Simulation (DES), which blends the RANS approach with Large Eddy Simulation (LES). The DES methodology demonstrated a high potential of being more accurate and informative than the RANS approaches. Whilst evaluations of RANS and DES models on various applications are abundant in the literature, such evaluations on full-car models are relatively fewer. In this study, four RANS models that are widely used in engineering applications, i.e., the realizable k - ε two-layer, Abe–Kondoh–Nagano (AKN) k - ε low-Reynolds, SST k - ω , and V2F are evaluated on a full-scale passenger vehicle with two different front-end configurations. In addition, both cases are run with two DES models to assess the differences between the flow predictions obtained using RANS and DES.

scholarly journals Turbulence Modeling a Review for Different Used Methods

2021 ◽  
Vol 39 (1) ◽  
pp. 227-234
Author(s):  
Khelifa Hami
Keyword(s):  
Turbulence Modeling ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Simulation Models ◽  
Navier Stokes ◽  
Future Research ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Complicated Geometries

This contribution represents a critical view of the advantages and limits of the set of mathematical models of the physical phenomena of turbulence. Turbulence models can be grouped into two categories, depending on how turbulent quantities are calculated: direct numerical simulations (DNS) and RANS (Reynolds Averaged Navier-Stokes Equations) models. The disadvantage of these models is that they require enormous computing power, inaccessible, especially for large and complicated geometries. For this reason, hybrid models (combinations between DNS and RANS methods) have been developed, for example, the LES (“Large Eddy Simulation”) or DES (“Detached Eddy Simulation”) models. They represent a compromise - are less precise than DNS, but more precise than RANS models. The results presented in this contribution will allow and facilitate future research in the field the choice of the model approach necessary for the case studies whatever their difficulty factor.

scholarly journals Impact of Underlying RANS Turbulence Models in Zonal Detached Eddy Simulation: Application to a Compressor Rotor

2020 ◽  
Vol 5 (3) ◽  
pp. 22
Author(s):  
Julien Marty ◽  
Cédric Uribe
Keyword(s):  
Turbulence Model ◽  
Turbulence Models ◽  
Adverse Pressure Gradient ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Compressor Rotor ◽  
Rans Turbulence Models ◽  
Unsteady Rans ◽  
The Impact

The present study focuses on the impact of the underlying RANS turbulence model in the Zonal Detached Eddy Simulation (ZDES) method when used for secondary flow prediction. This is carried out in light of three issues commonly investigated for hybrid RANS/LES methods (detection and protection of attached boundary layer, emergence, and growth of resolved turbulent fluctuations and accurate prediction of separation front due to progressive adverse pressure gradient). The studied configuration is the first rotor of a high pressure compressor. Three different turbulence modelings (Spalart and Allmaras model (SA), Menter model with (SST) and without (BSL) shear stress correction) are assessed as ZDES underlying turbulence model and also as turbulence model of unsteady RANS simulations. Whatever the underlying turbulence model, the ZDES behaves well with respect to the first two issues as the boundary layers appear effectively shielded and the RANS-to-LES switch is close downstream of trailing edges and separation fronts leading to a quick LES treatment of wakes and shear layers. Both tip leakage and corner flows are strongly influenced by the Navier–Stokes resolution approach (unsteady RANS vs. ZDES) but the underlying turbulence modelling (SA vs. SST vs. BSL) impacts mainly the junction flow near the hub for both approaches. ZDES underlying turbulence model choice appear essential since it leads to quite different corner flow separation topologies and so to inversion of the downstream stagnation pressure radial gradient.

Numerical Investigation of Energy Saving Device Effects on Ships With Propeller-Hull Interactions

2018 ◽  
Author(s):  
Ravi Chaithanya Mysa ◽  
Le Quang Tuyen ◽  
Ma Shengwei ◽  
Vinh-Tan Nguyen
Keyword(s):  
Energy Saving ◽  
Full Scale ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Propulsion Efficiency ◽  
Operational Conditions ◽  
Ship Resistance ◽  
The Past ◽  
Eddy Simulation ◽  
Flow Features

Energy saving devices (ESD) such as propeller ducts, pre-swirl stators, pre-nozzles, etc have been explored as a more economic and reliable approach to reduce energy consumption for both in-operation and newly design ships over the past decades. Those energy saving devices work in the principle of reducing ship resistance and improving propulsion efficiency as well as hull-propeller interactions. Potential saving from various types of ESD have been reported in literature from the range of 3–9% [1] for propulsion efficiency dependent on different measures. Deployment of those devices on actual full-scale ships has been limited over the past years. One of the key obstacles in application of ESD is the lack of confidence in measuring its efficiency on full-scale ships in actual operational conditions. Advances in computational fluid dynamics (CFD) has provided an alternative approach from model scale test to better understand uncertainties in prediction of ESD efficiency in full-scale ship operations [Shin et al, 2013]. In this work a high fidelity CFD model is presented for investigation effects of pre-nozzles on propulsion efficiency and ship resistance. The model is based on the Reynolds Average Navier-Stokes (RANS) solver with different turbulent models including a hybrid detached eddy simulation (DES) approach for predictions of complex near body flow features as well as in the wake regions from hull and propeller. The model is validated with model test for both towing and self-propulsion conditions. Finally a study of pre-nozzle effects on propeller efficiency as well as hull-propeller interaction is presented and compared with available experimental data (Tokyo 2015 Workshop). The current work constitutes a fundamental approach towards designing more efficient ESD for a specific hull form and propeller.

Current Capabilities of DES and LES for Submarines at Straight Course

2010 ◽  
Vol 54 (03) ◽  
pp. 184-196 ◽  
Author(s):  
N. Alin ◽  
R.E. Bensow ◽  
C. Fureby ◽  
T. Huuva ◽  
U. Svennberg
Keyword(s):  
Statistical Moments ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Complex Flow ◽  
First Order ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Actuator Disc ◽  
Rans Models ◽  
Coarse Grids

The flow around an axisymmetric hull, with and without appendages, is investigated using large eddy simulation (LES), detached eddy simulation (DES), and Reynolds averaged Navier Stokes (RANS) models. The main objectives of the study is to investigate the effect of the different simulation methods and to demonstrate the feasibility of using DES and LES on relatively coarse grids for submarine flows, but also to discuss some generic features of submarine hydrodynamics. For this purpose the DARPA Suboff configurations AFF1 (bare hull) and AFF8 (fully appended model) are used. The AFF1 case is interesting because it is highly demanding, in particular for LES and DES, due to the long midship section on which the boundary layer is developed. The AFF8 case represents the complex flow around a fully appended submarine with sail and aft rudders. An actuator disc model is used to emulate some of the effects of the propulsor for one of the AFF8 cases studied. Results for the AFF8 model are thus presented for both "towed" and "self-propelled" conditions, where as for the bare hull, only a "towed" condition is considered. For the AFF1 and the "towed" AFF8 cases experimental data are available for comparison, and the results from both configurations show that all methods give good results for first-order statistical moments although LES gives a better representation of structures and second-order statistical moments in the complex flow in the AFF8 case.

Detached-Eddy Simulations and Reynolds-Averaged Navier-Stokes Simulations of Delta Wing Vortical Flowfields

2002 ◽  
Vol 124 (4) ◽  
pp. 924-932 ◽  
Author(s):  
Scott Morton ◽  
James Forsythe ◽  
Anthony Mitchell ◽  
David Hajek
Keyword(s):  
Vortex Breakdown ◽  
Delta Wing ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Fighter Aircraft ◽  
Eddy Simulation ◽  
Reynolds Averaged Navier Stokes ◽  
High Reynolds

An understanding of vortical structures and vortex breakdown is essential for the development of highly maneuverable vehicles and high angle of attack flight. This is primarily due to the physical limits these phenomena impose on aircraft and missiles at extreme flight conditions. Demands for more maneuverable air vehicles have pushed the limits of current CFD methods in the high Reynolds number regime. Simulation methods must be able to accurately describe the unsteady, vortical flowfields associated with fighter aircraft at Reynolds numbers more representative of full-scale vehicles. It is the goal of this paper to demonstrate the ability of detached-eddy Simulation (DES), a hybrid Reynolds-averaged Navier-Stokes (RANS)/large-eddy Simulation (LES) method, to accurately predict vortex breakdown at Reynolds numbers above 1×106. Detailed experiments performed at Onera are used to compare simulations utilizing both RANS and DES turbulence models.

scholarly journals Comparative Study on CFD Turbulence Models for the Flow Field in Air Cooled Radiator

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1687
Author(s):  
Chao Yu ◽  
Xiangyao Xue ◽  
Kui Shi ◽  
Mingzhen Shao ◽  
Yang Liu
Keyword(s):  
Flow Field ◽  
Transient Flow ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Compartment Model ◽  
Navier Stokes ◽  
Engine Compartment ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Relevant Calculation

This paper compares the performances of three Computational Fluid Dynamics (CFD) turbulence models, Reynolds Average Navier-Stokes (RANS), Detached Eddy Simulation (DES), and Large Eddy Simulation (LES), for simulating the flow field of a wheel loader engine compartment. The distributions of pressure fields, velocity fields, and vortex structures in a hybrid-grided engine compartment model are analyzed. The result reveals that the LES and DES can capture the detachment and breakage of the trailing edge more abundantly and meticulously than RANS. Additionally, by comparing the relevant calculation time, the feasibility of the DES model is proved to simulate the three-dimensional unsteady flow of engine compartment efficiently and accurately. This paper aims to provide a guiding idea for simulating the transient flow field in the engine compartment, which could serve as a theoretical basis for optimizing and improving the layout of the components of the engine compartment.

Vortex-Induced Motion of a Square Cylinder at Moderate Reynolds Numbers

2016 ◽  
Author(s):  
Chih-Hua Wu ◽  
Shengwei Ma ◽  
Chang-Wei Kang ◽  
Teck-Bin Arthur Lim ◽  
Rajeev Kumar Jaiman ◽  
...  
Keyword(s):  
Vortex Shedding ◽  
Bluff Body ◽  
Computational Cost ◽  
Turbulence Models ◽  
Reynolds Numbers ◽  
Spanwise Direction ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Cylinder Length ◽  
Induced Motion

Bluff body structures exposed to ocean current can undergo vortex-induced motion (VIM) for certain geometric and physical conditions. Recently, the study of VIM has been gaining attention for many engineering applications, in particular offshore structures such as buoys, FPSOs, semi-submersibles, Spars and TLPs. The present work is a part of a systematic effort to investigate the VIM response of multi-columns floating platform. In real sea condition, floating platforms are in high Reynolds numbers region and flow patterns around structures are turbulent in nature. For the purpose of investigating and simulating accurately the nonlinear dynamic processes of vortex shedding, transport and wake interactions with the bluff body, the fundamental study of VIM around a square column at moderate Reynolds numbers (1500 ≤ Re ≤ 14000) is firstly investigated. In the present work, the transient flow pattern around a free vibrating square cylinder at moderate Reynolds numbers is numerically investigated by an open source CFD toolbox, OpenFOAM. Good consistency and agreement are found between the present numerical findings and that of experiments. The cylinder, with a blockage area of 4.2%, is mounted on an elastic support for free vibration in the transverse direction. Hybrid RANS-LES turbulence models are considered here for accurate prediction of massively separated turbulent wake flow while maintaining the reasonable computational cost. Three hybrid turbulence models, the DDES (Delayed Detached Eddy Simulation, the k-ω SST-DES (Detached Eddy Simulation), and the k–ω SST-SAS (Scale Adaptive Simulation), are studied and their results are compared with the reported experimental measurements. It is shown that the result of simulation with the k–ω SST-SAS model is closer to the reported literature than the other two and therefore, subsequently adopted for all the simulations of our study in this paper. The scaling effect of cylinder length in the spanwise direction is also studied with the objective to reduce the computational cost. From the comparison with the recent experimental measurements, the discrepancy between the present simulations of reducing cylinder length and the experiment increases only when Re ≥ 4000. This might stem from the increase in wavelength of some vortex shedding modes and turbulence intensity variation in the spanwise direction near the cylinder as Re ≥ 4000. The detailed flow patterns, 3D vortex structures (based on Q-criterion) and vortex-shedding modes are presented in this work as well.

On the Investigation of Flow around the Square Cylinder Based on Different LES Models

2012 ◽  
Vol 594-597 ◽  
pp. 2676-2679
Author(s):  
Zhe Liu
Keyword(s):  
Flow Characteristics ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Square Cylinder ◽  
Rans Model ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Reynolds Averaged Navier Stokes ◽  
Les Model

Although the conventional Reynolds-averaged Navier–Stokes (RANS) model has been widely applied in the industrial and engineering field, it is worthwhile to study whether these models are suitable to investigate the flow filed varying with the time. With the development of turbulence models, the unsteady Reynolds-averaged Navier–Stokes (URANS) model, detached eddy simulation (DES) and large eddy simulation (LES) compensate the disadvantage of RANS model. This paper mainly presents the theory of standard LES model, LES dynamic model and wall-adapting local eddy-viscosity (WALE) LES model. And the square cylinder is selected as the research target to study the flow characteristics around it at Reynolds number 13,000. The influence of different LES models on the flow field around the square cylinder is compared.

Flow in a Mechanical Bileaflet Heart Valve at Laminar and Near-Peak Systole Flow Rates: CFD Simulations and Experiments

2005 ◽  
Vol 127 (5) ◽  
pp. 782-797 ◽  
Author(s):  
Liang Ge ◽  
Hwa-Liang Leo ◽  
Fotis Sotiropoulos ◽  
Ajit P. Yoganathan
Keyword(s):  
Heart Valve ◽  
Turbulence Modeling ◽  
Mechanical Heart Valve ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Cfd Simulations ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Flow Through

Time-accurate, fully 3D numerical simulations and particle image velocity laboratory experiments are carried out for flow through a fully open bileaflet mechanical heart valve under steady (nonpulsatile) inflow conditions. Flows at two different Reynolds numbers, one in the laminar regime and the other turbulent (near-peak systole flow rate), are investigated. A direct numerical simulation is carried out for the laminar flow case while the turbulent flow is investigated with two different unsteady statistical turbulence modeling approaches, unsteady Reynolds-averaged Navier-Stokes (URANS) and detached-eddy simulation (DES) approach. For both the laminar and turbulent cases the computed mean velocity profiles are in good overall agreement with the measurements. For the turbulent simulations, however, the comparisons with the measurements demonstrate clearly the superiority of the DES approach and underscore its potential as a powerful modeling tool of cardiovascular flows at physiological conditions. The study reveals numerous previously unknown features of the flow.

Aeroacoustics response of wind turbine blade profiles in normal and icing conditions

2018 ◽  
Vol 42 (3) ◽  
pp. 243-251 ◽  
Author(s):  
Edison H Caicedo ◽  
Muhammad S Virk
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Numerical Study ◽  
Turbulence Models ◽  
Wind Turbine Blade ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Eddy Simulation

This article describes a multiphase computational fluid dynamics–based numerical study of the aeroacoustics response of symmetric and asymmetric wind turbine blade profiles in both normal and icing conditions. Three different turbulence models (Reynolds-averaged Navier–Stokes, detached eddy simulation, and large eddy simulation) have been used to make a comparison of numerical results with the experimental data, where a good agreement is found between numerical and experimental results. Detached eddy simulation turbulence model is found suitable for this study. Later, an extended computational fluid dynamics–based aeroacoustics parametric study is carried out for both normal (clean) and iced airfoils, where the results indicate a significant change in sound levels for iced profiles as compared to clean.

Sign in / Sign up

Export Citation Format

Share Document