scholarly journals Potential of Cold Plasma Technology in Ensuring the Safety of Foods and Agricultural Produce: A Review

Foods ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1435 ◽  
Author(s):  
Carolina Varilla ◽  
Massimo Marcone ◽  
George A. Annor

Cold plasma (CP) is generated when an electrical energy source is applied to a gas, resulting in the production of several reactive species such as ultraviolet photons, charged particles, radicals and other reactive nitrogen, oxygen, and hydrogen species. CP is a novel, non-thermal technology that has shown great potential for food decontamination and has also generated a lot of interest recently for a wide variety of food processing applications. This review discusses the potential use of CP in mainstream food applications to ensure food safety. The review focuses on the design elements of cold plasma technology, mode of action of CP, and types of CP technologies applicable to food applications. The applications of CP by the food industry have been demonstrated for food decontamination, pesticide residue removal, enzyme inactivation, toxin removal, and food packaging modifications. Particularly for food processing, CP is effective against major foodborne pathogenic micro-organisms such as Listeria monocytogenes and Salmonella Typhimurium, Tulane virus in romaine lettuce, Escherichia coli O157:H7, Campylobacter jejuni, and Salmonella spp. in meat and meat products, and fruits and vegetables. However, some limitations such as lipid oxidation in fish, degradation of the oligosaccharides in the juice have been reported with the use of CP, and for these reasons, further research is needed to mitigate these negative effects. Furthermore, more research is needed to maximize its potential.

2014 ◽  
Vol 35 (1) ◽  
pp. 5-17 ◽  
Author(s):  
S.K. Pankaj ◽  
C. Bueno-Ferrer ◽  
N.N. Misra ◽  
V. Milosavljević ◽  
C.P. O'Donnell ◽  
...  

2020 ◽  
Vol 1 (40) ◽  
pp. 112-120
Author(s):  
Vu Hoang Dang ◽  
Dam Ngoc Tran ◽  
Hung Minh Duong

In the process of fruits and vegetable producing and preserving, it always exists chemicals, agricultural byproducts and potential diseases in nature. Ensuring food safety and hygiene for fruits and vegetables is essential for consumers and processing exporters. This paper presents methods and experimentson a system of equipment for preparing and preserving fruits and vegetables with cold plasma technology. The water and air treatment system using cold plasma technology includes treatment modules corresponding to the process of treating fruits and vegetables before being stored. Evaluation of the water after treatment and experiment on vegetables and fruits through cold plasma technology with different experimental conditions are conducted. Results show that when vegetables and fruits passed the cold plasma system, they willstay fresh longer than conventional treatments.


2021 ◽  
Author(s):  
Arghya Mani ◽  
K. Rama Krishna ◽  
Anis Mirza

Plasma is the fourth state of matters which have a wide application in food processing and post harvest technology. Plasma when applied over crops has tremendous effects in improvement in the quality and other post harvest attributes. Application of cold plasma technology could effectively induce desirable changes in its overall quality and diverse physiology. The following review would discuss the application of non-thermal plasma technology to disinfect and decontaminate processed food product and fresh horticultural crops. Horticultural crops which are treated with plasma technology do not show any loss in nutrients. The packaging materials can also be sterilized by using plasma technology. Similarly, the food packed inside a package can also be sterilized without harming the package integrity. Beside that it can also be used to reduce the enzymatic activity of fresh fruits and vegetables and help to modify the food properties. Cold plasma technology can penetrate fungal biofilm and destroy resting fungal spores. This technology can also be harnessed to remove residual toxic pesticide from food products and fresh fruits and vegetables. However, the technology might sound a bit expensive but have a long future in terms of utility.


2018 ◽  
Vol 7 (4) ◽  
pp. 16 ◽  
Author(s):  
Atanu Biswas ◽  
Roselayne Ferro Furtado ◽  
Maria do Socorro Rocha Bastos ◽  
Selene D. Benevides ◽  
Marilia de Albuquerque Oliveira ◽  
...  

There is current interest in using biobased materials to produce food packaging that can increase the shelf-lives of fruits and vegetables and minimize food spoilage in supermarkets and at the same time not generating plastic waste that causes long-term disposal problems. A good candidate for such materials is the polysaccharide, such as carboxymethyl cellulose (CMC), which is edible and biodegradable. In this work films were produced from two CMC materials with different degrees of substitution (DS) that encapsulated four different essential oils (eugenol, rosemary oil, coriander oil, and nutmeg oil) that are known to have beneficial properties for food applications. The mechanical properties, opacity, and water vapor permeation were evaluated. In general, the essential oil-embedded CMC with the two DS values behaved rather differently. In particular, the essential oil-embedded CMC with 0.7 DS degree of substitution gave stronger and more flexible films and may be more suited for use in food packaging.


Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 769
Author(s):  
Vlad Mihalca ◽  
Andreea Diana Kerezsi ◽  
Achim Weber ◽  
Carmen Gruber-Traub ◽  
Jürgen Schmucker ◽  
...  

Food packaging is an area of interest not just for food producers or food marketing, but also for consumers who are more and more aware about the fact that food packaging has a great impact on food product quality and on the environment. The most used materials for the packaging of food are plastic, glass, metal, and paper. Still, over time edible films have become widely used for a variety of different products and different food categories such as meat products, vegetables, or dairy products. For example, proteins are excellent materials used for obtaining edible or non-edible coatings and films. The scope of this review is to overview the literature on protein utilization in food packages and edible packages, their functionalization, antioxidant, antimicrobial and antifungal activities, and economic perspectives. Different vegetable (corn, soy, mung bean, pea, grass pea, wild and Pasankalla quinoa, bitter vetch) and animal (whey, casein, keratin, collagen, gelatin, surimi, egg white) protein sources are discussed. Mechanical properties, thickness, moisture content, water vapor permeability, sensorial properties, and suitability for the environment also have a significant impact on protein-based packages utilization.


Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3543
Author(s):  
Wei Zhou ◽  
Jiawei Fang ◽  
Shuwei Tang ◽  
Zhengguo Wu ◽  
Xiaoying Wang

Cushioning and antibacterial packaging are the requirements of the storage and transportation of fruits and vegetables, which are essential for reducing the irreversible quality loss during the process. Herein, the composite of carboxymethyl nanocellulose, glycerin, and acrylamide derivatives acted as the shell and chitosan/AgNPs were immobilized in the core by using coaxial 3D-printing technology. Thus, the 3D-printed cushioning–antibacterial dual-function packaging aerogel with a shell–core structure (CNGA/C–AgNPs) was obtained. The CNGA/C–AgNPs packaging aerogel had good cushioning and resilience performance, and the average compression resilience rate was more than 90%. Although AgNPs was slowly released, CNGA/C–AgNPs packaging aerogel had an obvious antibacterial effect on E. coli and S. aureus. Moreover, the CNGA/C–AgNPs packaging aerogel was biodegradable. Due to the customization capabilities of 3D-printing technology, the prepared packaging aerogel can be adapted to more application scenarios by accurately designing and regulating the microstructure of aerogels, which provides a new idea for the development of food intelligent packaging.


Author(s):  
Cherakkathodi Sudheesh ◽  
Kappat Valiyapeediyekkal Sunooj

2019 ◽  
Vol 278 ◽  
pp. 276-283 ◽  
Author(s):  
Nathalia M. Coutinho ◽  
Marcello R. Silveira ◽  
Leonardo M. Fernandes ◽  
Jeremias Moraes ◽  
Tatiana C. Pimentel ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document