scholarly journals Influence of Ammonium Ions, Organic Load and Flow Rate on the UV/Chlorine AOP Applied to Effluent of a Wastewater Treatment Plant at Pilot Scale

Author(s):  
Eduard Rott ◽  
Bertram Kuch ◽  
Claudia Lange ◽  
Philipp Richter ◽  
Ralf Minke
2010 ◽  
Vol 62 (8) ◽  
pp. 1965-1965
Author(s):  
S. Park ◽  
J. Lee ◽  
J. Park ◽  
I. Byun ◽  
T. Park ◽  
...  

Publisher‘s note. We regret that the published version of this article erroneously denoted the first author as corresponding author; in fact the formal corresponding author of this paper is Professor Taeho Lee, whose address is repeated below.


Author(s):  
Tong Yu ◽  
Chenlu Xu ◽  
Feng Chen ◽  
Haoshuai Yin ◽  
Hao Sun ◽  
...  

Abstract Microcoagulation has recently been considered as a promising pretreatment for an ultrafiltration (UF) process from numerous studies. To investigate the effects of microcoagulation on the performance of the UF–reverse osmosis (RO) system treating wastewater with high and fluctuant salinity, different dosages of coagulant (poly-aluminum chloride) were added prior to the UF unit in a pilot-scale UF–RO system for a 10-week period operation. Microcoagulation obviously improved the contaminant removal and cleaning efficiencies, including water backwash, chemical enhanced backwash and cleaning in place processes. Organic fouling was dominated during the initial stage of the RO membrane fouling. The microbial communities of water samples and foulant on the RO membrane were similar to those of seawater and foulant on the RO membranes from seawater RO plants. The microbial community of the foulant on the membrane was similar to that of UF permeate and RO concentrate. These results demonstrated that microcoagulation could improve the performance of the UF–RO system treating the effluent with high and fluctuant salinity from a coastal municipal wastewater treatment plant.


2021 ◽  
Vol 56 (4) ◽  
pp. 621-629
Author(s):  
Orlando Antonio Duarte Hernandez ◽  
Ana Caroline Paula ◽  
Gustavo Rafael Collere Possetti ◽  
Mauricio Pereira Cantão ◽  
Miguel Mansur Aisse

This study aims to present the time behavior of wastewater flow parameters, organic matter, biogas flow, biogas composition, and its relations, measured through online sensors, in a municipal wastewater treatment plant (WWTP) operating full-scale upflow anaerobic sludge blanket (UASB) reactors, installed in the south of Brazil. WWTP has online measurement devices to evaluate some physicochemical variables of the sewage and the biogas. The COD analyzer (UV– Vis probe), ultrasonic flow meter, biogas flow meter, and biogas composition analyzer were the equipment used. The monitoring occurred for two time periods each of 72 h and one time period for 48 h in the year 2018. Data were checked with descriptive statistics, data independence was checked through the autocorrelation Box– Ljung test, normality behavior was checked with several tests (Shapiro– Wilk, Kolmogorov–Smirnov, Lilliefors, Anderson–Darling, D’Agostino K2, and Chen–Shapiro), and Spearman’s correlation coefficient was used to evaluate the correlations among the parameters. The mean sewage flow was 345 ± 120 L.s-1; removed organic load was, in average, 48%; biogas quality values were 82.32% ± 3.62% v/v (CH4), 2.66% ± 1.19% v/v (CO2), and 3453 ± 1268 ppm (H2S); and the production per capita obtained was 4.51 ± 1.65 NL.hab-1.d-1. It was estimated an electric power generation of 3118.6 kWh.d-1, which is equivalent to an installed power of 130 KW. The behavior of removed organic load and biogas flow (Nm3.h-1), produced in the treatment plant, showed variable, periodic, and nonstationary time behavior.  


2022 ◽  
pp. 118069
Author(s):  
Maria Fernanda Espinosa ◽  
Matthew E. Verbyla ◽  
Lucas Vassalle ◽  
Cintia Leal ◽  
Deborah Leroy-Freitas ◽  
...  

Author(s):  
Ahmad I. Abbas ◽  
Mohammad D. Qandil ◽  
Muhannad R. Al-Haddad ◽  
Mandana S. Saravani ◽  
Ryoichi S. Amano

Wastewater treatment plants (WWTPs) are a significant energy consumer, yet there are several opportunities of implementing on-site power generation systems. Within the treatment process, the high flow rate of effluent is produced and discharged to a nearby water body by gravity. Thus, hydro turbines can be utilized to generate power in such application due to a difference in elevation and high flow rate. This paper presents a case study of introducing a hydro turbine in wastewater treatment plant in Wisconsin and evaluating the power output in addition to determining the energy savings. The wastewater treatment plant considered in this study has an effluent flow rate of 190 MGD (million gallons per day) and elevation difference of 3 meters (10 feet) between the final stage of treatment and the discharge point. Based on the aforementioned parameters; hubless rim-drive Kaplan type hydro turbine (RDT) is the optimal choice to be used in such application. The RDT is designed and optimized by using in-house code. A computational fluid dynamics (CFD) software is applied to evaluate the performance of the proposed model, and the system is simulated through HOMER software to validate the results generated by the CFD. The expected savings is estimated to be 1,564 MWh/year.


1990 ◽  
Vol 22 (7-8) ◽  
pp. 225-232
Author(s):  
G. Petersen

The upgrading of an existing mechanical wastewater treatment plant to meet the new standards for effluent quality in the Municipality of Fredericia, Denmark, are presented. The Municipality has a lot of very big organic and inorganic industries, which leaves several different possibilities for treatment strategies. In 1987 pilot-scale tests were carried out to study the effects of various combinations of wastewater types on the treatment efficiency, and the tests resulted in two main solutions for the wastewater treatment system. The pilot-scale tests were run in a two - stage biology plant. The first stage was either a BIOSORPTION unit or a PRE-DENITRIFICATION unit. The second stage was a biological nitrogen and phosphorus removal unit (a BIO-DENIPHO unit).


Sign in / Sign up

Export Citation Format

Share Document