scholarly journals 4D-BIM-Based Workspace Planning for Temporary Safety Facilities in Construction SMEs

2020 ◽  
Vol 17 (10) ◽  
pp. 3403
Author(s):  
Kieu-Trang Pham ◽  
Duc-Nghia Vu ◽  
Phuc Le Hieu Hong ◽  
Chansik Park
Keyword(s):  
Health And Safety ◽  
Residential Building ◽  
Information Modeling ◽  
Limiting Factors ◽  
Project Schedule ◽  
Safety Measures ◽  
Safety Practices ◽  
Building Information ◽  
Building Project

Temporary safety facilities (TSFs) are an essential support system providing necessary protection to workers during construction activities, which are targeted towards preventing the occurrence of incidents and accidents at the construction site; however, the schedule and location of installation and demolition of TSFs continue to rely on labor experience, and are often omitted from formal drawings or documents. This results in thousands of accidents in the construction industry, especially in construction small and medium-sized enterprises (SMEs) because of their several limiting factors; therefore, this study proposes automatic workspace planning for TSFs based on construction activities, which is a systematized approach for construction SMEs to practice occupational health and safety (OHS). By using building information modeling (BIM) and add-in algorithm, safety facilities can be simulated and visualized to integrate into the designated workspace. The developed system was implemented utilizing 4D-BIM for TSFs installation and validated with a case study on a residential building project. The result revealed that the visualized TSF produces a better understanding of safety measures with regard to project schedule. Additionally, TSFs workspace planning provides an affordable approach that motivates safety practices among the SMEs; consequently, the effectiveness of construction safety measures and their management is enhanced appreciably.

BIM-based model for quantifying the design change time ripple effect

2017 ◽  
Vol 44 (8) ◽  
pp. 626-642 ◽  
Author(s):  
Valeh Moayeri ◽  
Osama Moselhi ◽  
Zhenhua Zhu
Keyword(s):  
Construction Projects ◽  
Total Duration ◽  
Information Modeling ◽  
Ripple Effect ◽  
Project Schedule ◽  
Design Changes ◽  
Building Information ◽  
Quantification Model ◽  
The Impact

Design changes by owners are common to many construction projects and can cause severe delays if owners do not consider that a change in one part of the project may cause a series of changes in other parts of that project. The impact of a changed component on other unchanged components is known as the “change ripple effect”. To efficiently manage design changes, the ripple effect should be quantified and impact evaluated. This paper presents a building information modeling (BIM)-based quantification model to quantify the ripple effect of owner-requested design changes. The developed model calculates the impact of design changes and their ripple effect on a project’s total duration. After analyzing the ripple effect over time, the model updates the project schedule accordingly. To demonstrate its usefulness and illustrate its essential features, the model is applied to a case study.

A smart objects library for BIM-based construction site and emergency management to support mobile VR safety training experiences

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Vito Getuli ◽  
Pietro Capone ◽  
Alessandro Bruttini ◽  
Tommaso Sorbi
Keyword(s):  
Health And Safety ◽  
Safety Training ◽  
Information Modeling ◽  
Limiting Factors ◽  
Construction Site ◽  
Process Definition ◽  
Content Type ◽  
Support Tool ◽  
Building Information ◽  
Definition Of

Purpose Health and safety training via immersive virtual reality (VR) in the construction sector is still limited to few early adopters despite the benefits it could provide in terms of training effectiveness. To foster its adoption, in this work, the authors address the lack of an organized asset of digital contents dedicated to the production of VR site scenarios that emerged as one of the most limiting factors for the implementation of building information modeling (BIM) and VR for construction workers’ safety training. To improve this critically time-consuming process, a dedicated site object library is proposed. Design/methodology/approach The development of the site object library for the production of BIM-based VR safety training experiences followed a four-step process: definition of the object list and categories from the analysis of heterogeneous knowledge sources – construction sectors’ regulations, case studies and site scenarios’ imagery; definition of the object requirements (e.g. information, graphics, sounds, animations and more); design of an object information sheet as a library implementation support tool; and library implementation and validation via collaborative VR sessions. Findings This work provides the definition of a structured library of construction site objects dedicated to the production of VR scenarios for safety training comprising 168 items, implemented and validated. Originality/value The research contributes to facilitate and standardize the time-consuming contents’ production and modeling process of site scenarios for VR safety training, addressing the lack of a dedicated site object library. Furthermore, the novel library framework could serve as a base for future extensions dedicated to other applications of VR site simulations (e.g. constructability analysis).

scholarly journals Integration of Building Information Modeling (BIM) and LEED for A Green Building Rating

2021 ◽  
Vol 12 (2) ◽  
pp. 47-57
Author(s):  
Mizanoor Rahman ◽  
Sohana Alam Mim ◽  
Shamanta Azad Oshin
Keyword(s):  
High Performance ◽  
Building Information Modeling ◽  
Residential Building ◽  
Green Building ◽  
Building Design ◽  
Information Modeling ◽  
Rating System ◽  
Building Information ◽  
Building Project ◽  
The Impact

Green building design and construction is a global demand to save this earth. Leadership in Energy and Environmental Design (LEED) is the world's most widely implemented sustainable building rating system. Building Information Modeling (BIM) technology assist to keep multi-disciplinary information into a single model, and it provides an ability to perform this research. The aim is to assess the pre-certification of a proposed residential building project in integration with BIM and LEED and find out the impact of cost for a green building project. A Prototype 3D model was developed by BIM technology for the LEED certification process. A total of 704 simulations was conducted by using Green Building Studio (GBS) tools. All simulation results were calculated based on nine categories of the LEED rating system. The results of this study indicate that the lifecycle cost can be reduced significantly for a high-performance green building despite of having a high initial investment cost. Journal of Engineering Science 12(2), 2021, 47-57

scholarly journals Decision-Making Processes in Controlling Exposure to Sunlight Supported by Simulation Tools: A Case Study in Warm Weather

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4100
Author(s):  
Mariana Huskinson ◽  
Antonio Galiano-Garrigós ◽  
Ángel Benigno González-Avilés ◽  
M. Isabel Pérez-Millán
Keyword(s):  
Decision Making ◽  
Global Analysis ◽  
Energy Performance ◽  
Information Modeling ◽  
The European Union ◽  
Evaluation Tool ◽  
Simulation Tools ◽  
Building Information ◽  
The Impact

Improving the energy performance of existing buildings is one of the main strategies defined by the European Union to reduce global energy costs. Amongst the actions to be carried out in buildings to achieve this objective is working with passive measures adapted to each type of climate. To assist designers in the process of finding appropriate solutions for each building and location, different tools have been developed and since the implementation of building information modeling (BIM), it has been possible to perform an analysis of a building’s life cycle from an energy perspective and other types of analysis such as a comfort analysis. In the case of Spain, the first BIM environment tool has been implemented that deals with the global analysis of a building’s behavior and serves as an alternative to previous methods characterized by their lack of both flexibility and information offered to designers. This paper evaluates and compares the official Spanish energy performance evaluation tool (Cypetherm) released in 2018 using a case study involving the installation of sunlight control devices as part of a building refurbishment. It is intended to determine how databases and simplifications affect the designer’s decision-making. Additionally, the yielded energy results are complemented by a comfort analysis to explore the impact of these improvements from a users’ wellbeing viewpoint. At the end of the process the yielded results still confirm that the simulation remains far from reality and that simulation tools can indeed influence the decision-making process.

scholarly journals Integration of Emergy Analysis with Building Information Modeling

2021 ◽  
Vol 13 (14) ◽  
pp. 7990
Author(s):  
Suman Paneru ◽  
Forough Foroutan Jahromi ◽  
Mohsen Hatami ◽  
Wilfred Roudebush ◽  
Idris Jeelani
Keyword(s):  
Life Cycle ◽  
Building Materials ◽  
Building Information Modeling ◽  
Energy Analysis ◽  
Information Modeling ◽  
Environmental Cost ◽  
Emergy Analysis ◽  
Modeling Tools ◽  
Building Information

Traditional energy analysis in Building Information Modeling (BIM) only accounts for the energy requirements of building operations during a portion of the occupancy phase of the building’s life cycle and as such is unable to quantify the true impact of buildings on the environment. Specifically, the typical energy analysis in BIM does not account for the energy associated with resource formation, recycling, and demolition. Therefore, a comprehensive method is required to analyze the true environmental impact of buildings. Emergy analysis can offer a holistic approach to account for the environmental cost of activities involved in building construction and operation in all its life cycle phases from resource formation to demolition. As such, the integration of emergy analysis with BIM can result in the development of a holistic sustainability performance tool. Therefore, this study aimed at developing a comprehensive framework for the integration of emergy analysis with existing Building Information Modeling tools. The proposed framework was validated using a case study involving a test building element of 8’ × 8’ composite wall. The case study demonstrated the successful integration of emergy analysis with Revit®2021 using the inbuilt features of Revit and external tools such as MS Excel. The framework developed in this study will help in accurately determining the environmental cost of the buildings, which will help in selecting environment-friendly building materials and systems. In addition, the integration of emergy into BIM will allow a comparison of various built environment alternatives enabling designers to make sustainable decisions during the design phase.

scholarly journals Utilization of Building Information Modeling for Arranging the Structural Kingposts

Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 323
Author(s):  
Vachara Peansupap ◽  
Pisal Nov ◽  
Tanit Tongthong
Keyword(s):  
Underground Structure ◽  
Visual Programming ◽  
Information Modeling ◽  
Construction Technology ◽  
Underground Structures ◽  
Building Information Modelling ◽  
Engineering Knowledge ◽  
Building Information ◽  
Rule Based Approach

The kingpost was a vertical element that was used to support the structural strut in the deep excavation. The structural kingpost was commonly arranged by experienced engineers who used two-dimensional construction drawings. Thus, it was still time-consuming and error-prone. Currently, an available construction program has been developed to arrange the structural kingpost by identifying the clash problems in the 3D environment. However, they have a limitation for detecting the clash that was unable to visualize the concurrent clashes between kingpost and many underground structures. Then, the engineer cannot see all the clash incidents with each kingpost and move the kingpost to avoid the clashes successfully. Since the kingpost arrangement was still an inefficient practice that was limited in the visualization aspect, this research used engineering knowledge and advanced construction technology to detect and solve the clashes between kingposts and underground structures. The methodology used engineering knowledge of kingpost arrangement to develop the system modules by using a rule-based approach. Then, these modules were developed into the system by using visual programming of Building Information Modelling (BIM). To test the system, an underground structure from building construction was selected as a case study to apply the developed system. Finally, the finding of this study could overcome human judgment by providing less interaction in the kingpost arrangement and visualization improvement of clash occurrences in the 3D model.

scholarly journals BIM Management Measure for an Effective Green Building Project

Buildings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 147 ◽  
Author(s):  
Reuven Maskil-Leitan ◽  
Ury Gurevich ◽  
Iris Reychav
Keyword(s):  
Social System ◽  
Green Building ◽  
Social Benefit ◽  
Information Modeling ◽  
Project Outcomes ◽  
System A ◽  
Management Measure ◽  
Building Information ◽  
Building Project ◽  
Optimal Implementation

In light of the gap in research and practice, with regard to achieving the sustainability goals of green building, while maximizing combination with building-information-modeling (BIM) as a social system—a gap that is expressed in the absence of integration of all stakeholders—a managerial measure is proposed to integrate them and promote sustainable green building. By using a framework for implementing BIM as a social system, and through network analysis, an index is developed to assess its integration into the green building—the Green BIM Index. This measure consists of comparing a social benchmark for optimal implementation with the actual implementation, in a given project. The index is intended to help score the BIM integration level in a green building. Comparing the BIM management measure results with social benefit assessments, and the effectiveness of BIM in nine case-studies enables to understand project outcomes in terms of schedules, budgets, and quality. The paper demonstrates the index applicability, pointing to possible significant economic improvements through the implementation of BIM social capabilities. BIM management benchmarking is helpful for the comparative evaluation of similar projects incorporating green building with BIM, indicating the level of integration to improve benefits.

scholarly journals UAV, Digital Processing and Vectorization Techniques Applied to Building Condition Assessment and Follow-up

2020 ◽  
Vol 14 (4) ◽  
pp. 507-513
Author(s):  
Carles Serrat ◽  
Sebastian Banaszek ◽  
Anna Cellmer ◽  
Vicenç Gilbert ◽  
Anna Banaszek
Keyword(s):  
Expert Knowledge ◽  
Digital Processing ◽  
Condition Assessment ◽  
Information Modeling ◽  
Building Information ◽  
Aerial Vehicle ◽  
Building Condition ◽  
Video Material

The aim of the paper is to explain the basic principles of carrying out an inventory and follow-up of buildings and their condition assessment, by using the Full Interactive Visualization Method for Building Condition Assessment platform. It is a platform enabling the implementation of construction inventory based on the remote cooperation of many specialists in the field of, among others: building construction, architecture, civil engineering, photogrammetry, CAD, UAV. This type of cooperation is of particular importance especially in the context of the current epidemiological situation related to COVID-19. The idea of the presented platform fits into the broadly understanding of Building Information Modeling. After introducing the methodology, stages of the inventory and follow-up process carried out within the platform are illustrated and discussed on the basis of a case study. Based on the obtained results it can be concluded that the proposed methodology creates a convenient, efficient and inexpensive tool for massive inspection of building resources in large areas. The inventory is based primarily on high-quality photo and video material obtained from the deck of an unmanned aerial vehicle and the expert knowledge of the inspector conducting the inspection. By combining digital images data (photos, 3D model, orthophotos) with substantive data (facade element classification tables, wear / defect classification tables), we get a platform that allows intuitive access to viewing, classification, editing and analysis of selected data.

Sign in / Sign up

Export Citation Format

Share Document