scholarly journals Hierarchical Instance Recognition of Individual Roadside Trees in Environmentally Complex Urban Areas from UAV Laser Scanning Point Clouds

2020 ◽  
Vol 9 (10) ◽  
pp. 595
Author(s):  
Yongjun Wang ◽  
Tengping Jiang ◽  
Jing Liu ◽  
Xiaorui Li ◽  
Chong Liang
Keyword(s):  
Urban Areas ◽  
Laser Scanning ◽  
Multiple Scales ◽  
Semantic Representation ◽  
Point Clouds ◽  
Previous Method ◽  
City Management ◽  
Global Features ◽  
Individual Tree ◽  
Automated Method

Individual tree segmentation is essential for many applications in city management and urban ecology. Light Detection and Ranging (LiDAR) system acquires accurate point clouds in a fast and environmentally-friendly manner, which enables single tree detection. However, the large number of object categories and occlusion from nearby objects in complex environment pose great challenges in urban tree inventory, resulting in omission or commission errors. Therefore, this paper addresses these challenges and increases the accuracy of individual tree segmentation by proposing an automated method for instance recognition urban roadside trees. The proposed algorithm was implemented of unmanned aerial vehicles laser scanning (UAV-LS) data. First, an improved filtering algorithm was developed to identify ground and non-ground points. Second, we extracted tree-like objects via labeling on non-ground points using a deep learning model with a few smaller modifications. Unlike only concentrating on the global features in previous method, the proposed method revises a pointwise semantic learning network to capture both the global and local information at multiple scales, significantly avoiding the information loss in local neighborhoods and reducing useless convolutional computations. Afterwards, the semantic representation is fed into a graph-structured optimization model, which obtains globally optimal classification results by constructing a weighted indirect graph and solving the optimization problem with graph-cuts. The segmented tree points were extracted and consolidated through a series of operations, and they were finally recognized by combining graph embedding learning with a structure-aware loss function and a supervoxel-based normalized cut segmentation method. Experimental results on two public datasets demonstrated that our framework achieved better performance in terms of classification accuracy and recognition ratio of tree.

scholarly journals A CONCEPT FOR THE SEGMENTATION OF INDIVIDUAL URBAN TREES FROM DENSE MLS POINT CLOUDS

2021 ◽  
Vol XLIII-B2-2021 ◽  
pp. 171-178
Author(s):  
P.-R. Hirt ◽  
L. Hoegner ◽  
U. Stilla
Keyword(s):  
Urban Areas ◽  
Laser Scanning ◽  
Region Growing ◽  
Point Clouds ◽  
General Concept ◽  
Urban Trees ◽  
Individual Tree ◽  
Positive Effects ◽  
3D Point Clouds ◽  
The Individual

Abstract. In our daily lives, trees can be seen as the tallest and most noticeable representatives of the plant kingdom. Especially in urban areas, the individual tree is of high significance and responsible for a manifold of positive effects on the environment and residents. In the context of urban tree registers and thus monitoring of urban vegetation, we propose a general concept for the segmentation of trees from 3D point clouds. Mobile Laser Scanning (MLS) is introduced as the preferred sensor. Based on an analysis of earlier work in this field, we gather arguments and methods in order to involve segmentation in the bigger frame of a tree register workflow, including detailed modeling and change detection. Our concept for segmentation is based on a voxel-structure. In a first step, region growing approaches are used for ground removal and rough segmentation. Later, graph-based optimization will separate neighboring trees. For now, only the general concept can be introduced—quantitative analysis and optimization of the steps will follow in future work.

Potential for Individual Tree Monitoring in Ponderosa Pine-Dominated Forests Using Unmanned Aerial System Structure from Motion Point Clouds

2021 ◽  
Author(s):  
Matthew B. Creasy ◽  
Wade Travis Tinkham ◽  
Chad M. Hoffman ◽  
Jody C. Vogeler
Keyword(s):  
Forest Structure ◽  
Ponderosa Pine ◽  
Laser Scanning ◽  
Point Clouds ◽  
System Structure ◽  
Detection Methods ◽  
Unmanned Aerial System ◽  
Individual Tree ◽  
Detection Rates ◽  
Ponderosa Pine Forests

Characterization of forest structure is important for management-related decision making, monitoring, and adaptive management. Increasingly, observations of forest structure are needed at both finer resolutions and across greater extents to support spatially explicit management planning. Unmanned aerial system (UAS)-based photogrammetry provides an airborne method of forest structure data acquisition at a significantly lower cost and time commitment than existing methods such as airborne laser scanning (LiDAR). This study utilizes nearly 5,000 stem-mapped trees in ponderosa pine-dominated forests to evaluate several algorithms for detecting individual tree locations and characterizing crown area across tree sizes. Our results indicate that adaptive variable-window detection methods with UAS-based canopy height models have greater tree detection rates compared to fixed window analysis across a range of tree sizes. Using the UAS approach, probability of detecting individual trees decreases from 97% for dominant overstory to 67% for suppressed understory trees. Additionally, crown radii were correctly determined within 0.5 m for approximately two-thirds of sampled trees. These findings highlight the potential for UAS photogrammetry to characterize forest structure through the detection of trees and tree groups in open-canopy ponderosa pine forests. Further work should investigate how these methods transfer to more diverse species compositions and forest structures.

scholarly journals CHANGE DETECTION AND DEFORMATION ANALYSIS BASED ON MOBILE LASER SCANNING DATA OF URBAN AREAS

2020 ◽  
Vol V-2-2020 ◽  
pp. 703-710
Author(s):  
J. Gehrung ◽  
M. Hebel ◽  
M. Arens ◽  
U. Stilla
Keyword(s):  
Change Detection ◽  
Urban Areas ◽  
Laser Scanning ◽  
State Of The Art ◽  
Point Clouds ◽  
Deformation Analysis ◽  
Lidar Data ◽  
Efficient Manner ◽  
Incomplete Observations ◽  
Novel Method

Abstract. Change detection is an important tool for processing multiple epochs of mobile LiDAR data in an efficient manner, since it allows to cope with an otherwise time-consuming operation by focusing on regions of interest. State-of-the-art approaches usually either do not handle the case of incomplete observations or are computationally expensive. We present a novel method based on a combination of point clouds and voxels that is able to handle said case, thereby being computationally less expensive than comparable approaches. Furthermore, our method is able to identify special classes of changes such as partially moved, fully moved and deformed objects in addition to the appeared and disappeared objects recognized by conventional approaches. The performance of our method is evaluated using the publicly available TUM City Campus datasets, showing an overall accuracy of 88 %.

scholarly journals LiDAR based urban vegetation mapping as a basis of green infrastructure planning

2020 ◽  
Vol 171 ◽  
pp. 02008
Author(s):  
Krzysztof Pyszny ◽  
Mariusz Sojka ◽  
Rafał Wróżyński
Keyword(s):  
Green Infrastructure ◽  
Urban Areas ◽  
Laser Scanning ◽  
Noise Pollution ◽  
Point Clouds ◽  
Data Mapping ◽  
Vegetation Density ◽  
Island Effect ◽  
Detailed Assessment ◽  
The City

Planning green infrastructure in the cities is a challenging task for planners and city managers. Developing multifunctional green space systems provide many benefits including: increasing water retention, mitigating urban heat island effect, microclimate regulation, reducing air, water and noise pollution and conservation biodiversity. The greenery in the city also have an impact on human health. The paper presents the possibilities of using LiDAR data mapping vegetation density in urban areas on the example of Gorzów Wielkopolski (Poland). Maps made as a result of processing the point clouds obtained from airborne laser scanning represents the most accurate, comprehensive and detailed assessment of Gorzów Wielkopolski vegetation cover to date and establishes the baseline for greenery governance and planning of green infrastructure in the city.

scholarly journals Predicting Growing Stock Volume of Eucalyptus Plantations Using 3-D Point Clouds Derived from UAV Imagery and ALS Data

Forests ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 905 ◽  
Author(s):  
Guerra-Hernández ◽  
Cosenza ◽  
Cardil ◽  
Silva ◽  
Botequim ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Basal Area ◽  
Remote Sensing Data ◽  
Tree Height ◽  
Point Clouds ◽  
Volume Estimation ◽  
P Value ◽  
Test Statistic ◽  
Individual Tree ◽  
Significant Difference

Estimating forest inventory variables is important in monitoring forest resources and mitigating climate change. In this respect, forest managers require flexible, non-destructive methods for estimating volume and biomass. High-resolution and low-cost remote sensing data are increasingly available to measure three-dimensional (3D) canopy structure and to model forest structural attributes. The main objective of this study was to evaluate and compare the individual tree volume estimates derived from high-density point clouds obtained from airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) in Eucalyptus spp. plantations. Object-based image analysis (OBIA) techniques were applied for individual tree crown (ITC) delineation. The ITC algorithm applied correctly detected and delineated 199 trees from ALS-derived data, while 192 trees were correctly identified using DAP-based point clouds acquired from Unmanned Aerial Vehicles (UAV), representing accuracy levels of respectively 62% and 60%. Addressing volume modelling, non-linear regression fit based on individual tree height and individual crown area derived from the ITC provided the following results: Model Efficiency (Mef) = 0.43 and 0.46, Root Mean Square Error (RMSE) = 0.030 m3 and 0.026 m3, rRMSE = 20.31% and 19.97%, and an approximately unbiased results (0.025 m3 and 0.0004 m3) using DAP and ALS-based estimations, respectively. No significant difference was found between the observed value (field data) and volume estimation from ALS and DAP (p-value from t-test statistic = 0.99 and 0.98, respectively). The proposed approaches could also be used to estimate basal area or biomass stocks in Eucalyptus spp. plantations.

Individual Tree Measurement in Tropical Environment using Terrestrial Laser Scanning

2015 ◽  
Vol 73 (5) ◽  
Author(s):  
Muhammad Zulkarnain Abdul Rahman ◽  
Zulkepli Majid ◽  
Md Afif Abu Bakar ◽  
Abd Wahid Rasib ◽  
Wan Hazli Wan Kadir
Keyword(s):  
Laser Scanning ◽  
Mean Squared Error ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Crown ◽  
Individual Tree ◽  
Branch Diameter ◽  
Reference Tree ◽  
Crown Volume ◽  
Tree Branch

Detailed forest inventory and mensuration of individual trees have drawn attention of research society mainly to support sustainable forest management. This study aims at estimating individual tree attributes from high density point cloud obtained by terrestrial laser scanner (TLS). The point clouds were obtained over single reference tree and group of trees in forest area. The reference tree is treated as benchmark since detailed measurements of branch diameter were made on selected branches with different sizes and locations. Diameter at breast height (DBH) was measured for trees in forest. Furthermore tree height, height to crown base, crown volume and tree branch volume were also estimated for each tree. Branch diameter is estimated directly from the point clouds based on semi-automatic approach of model fitting i.e. sphere, ellipse and cylinder. Tree branch volume is estimated based on the volume of the fitted models. Tree height and height to crown base are computed using histogram analysis of the point clouds elevation. Tree crown volume is estimated by fitting a convex-hull on the tree crown. The results show that the Root Mean Squared Error (RMSE) of the estimated tree branch diameter does not have a specific trend with branch sizes and number of points used for fitting process. This explains complicated distribution of point clouds over the branches. Overall cylinder model produces good results with most branch sizes and number of point clouds for fitting. The cylinder fitting approach shows significantly better estimation results compared to sphere and ellipse fitting models.   

scholarly journals Very High Density Point Clouds from UAV Laser Scanning for Automatic Tree Stem Detection and Direct Diameter Measurement

2020 ◽  
Vol 12 (8) ◽  
pp. 1236 ◽  
Author(s):  
Karel Kuželka ◽  
Martin Slavík ◽  
Peter Surový
Keyword(s):  
Cross Sections ◽  
Hough Transform ◽  
Laser Scanning ◽  
Point Clouds ◽  
Mean Bias Error ◽  
Bias Error ◽  
Least Trimmed Squares ◽  
Remotely Sensed Data ◽  
Individual Tree ◽  
Tree Stem

Three-dimensional light detection and ranging (LiDAR) point clouds acquired from unmanned aerial vehicles (UAVs) represent a relatively new type of remotely sensed data. Point cloud density of thousands of points per square meter with survey-grade accuracy makes the UAV laser scanning (ULS) a very suitable tool for detailed mapping of forest environment. We used RIEGL VUX-SYS to scan forest stands of Norway spruce and Scots pine, the two most important economic species of central European forests, and evaluated the suitability of point clouds for individual tree stem detection and stem diameter estimation in a fully automated workflow. We segmented tree stems based on point densities in voxels in subcanopy space and applied three methods of robust circle fitting to fit cross-sections along the stems: (1) Hough transform; (2) random sample consensus (RANSAC); and (3) robust least trimmed squares (RLTS). We detected correctly 99% and 100% of all trees in research plots for spruce and pine, respectively, and were able to estimate diameters for 99% of spruces and 98% of pines with mean bias error of −0.1 cm (−1%) and RMSE of 6.0 cm (19%), using the best performing method, RTLS. Hough transform was not able to fit perimeters in unfiltered and often incomplete point representations of cross-sections. In general, RLTS performed slightly better than RANSAC, having both higher stem detection success rate and lower error in diameter estimation. Better performance of RLTS was more pronounced in complicated situations, such as incomplete and noisy point structures, while for high-quality point representations, RANSAC provided slightly better results.

Influence of ULS data acquisition characteristics on the achievable stem reconstruction accuracies

2020 ◽  
Author(s):  
Moritz Bruggisser ◽  
Johannes Otepka ◽  
Norbert Pfeifer ◽  
Markus Hollaus
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Stem Diameter ◽  
Forest Monitoring ◽  
Individual Tree ◽  
Detection Rates ◽  
Point Count ◽  
Tree Stem

<p>Unmanned aerial vehicles-borne laser scanning (ULS) allows time-efficient acquisition of high-resolution point clouds on regional extents at moderate costs. The quality of ULS-point clouds facilitates the 3D modelling of individual tree stems, what opens new possibilities in the context of forest monitoring and management. In our study, we developed and tested an algorithm which allows for i) the autonomous detection of potential stem locations within the point clouds, ii) the estimation of the diameter at breast height (DBH) and iii) the reconstruction of the tree stem. In our experiments on point clouds from both, a RIEGL miniVUX-1DL and a VUX-1UAV, respectively, we could detect 91.0 % and 77.6 % of the stems within our study area automatically. The DBH could be modelled with biases of 3.1 cm and 1.1 cm, respectively, from the two point cloud sets with respective detection rates of 80.6 % and 61.2 % of the trees present in the field inventory. The lowest 12 m of the tree stem could be reconstructed with absolute stem diameter differences below 5 cm and 2 cm, respectively, compared to stem diameters from a point cloud from terrestrial laser scanning. The accuracy of larger tree stems thereby was higher in general than the accuracy for smaller trees. Furthermore, we recognized a small influence only of the completeness with which a stem is covered with points, as long as half of the stem circumference was captured. Likewise, the absolute point count did not impact the accuracy, but, in contrast, was critical to the completeness with which a scene could be reconstructed. The precision of the laser scanner, on the other hand, was a key factor for the accuracy of the stem diameter estimation. <br>The findings of this study are highly relevant for the flight planning and the sensor selection of future ULS acquisition missions in the context of forest inventories.</p>

Sign in / Sign up

Export Citation Format

Share Document