scholarly journals Designing Potential Donor Materials Based on DRCN5T with Halogen Substitutions: A DFT/TDDFT Study

2021 ◽  
Vol 22 (24) ◽  
pp. 13498
Author(s):  
Yunjie Xiang ◽  
Jie Zhang ◽  
Shaohui Zheng
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Dipole Moments ◽  
Visible Region ◽  
Open Circuit ◽  
Frontier Molecular Orbital ◽  
Triplet Energy ◽  
Potential Donor ◽  
Photovoltaic Properties ◽  
Functional Theory

Experimental researchers have found that the organic solar cell (OSC) based on DRCN5T (an oligothiophene) possesses excellent power conversion efficiency (PCE) of 10.1%. However, to date, there have been few studies about halogenation of DRCN5T, and its effects on photovoltaic properties of halogenated DRCN5T are still not clear. In the present work, we first perform benchmark calculations and effectively reproduce experimental results. Then, eight halogenated DRCN5T molecules are designed and investigated theoretically by using density functional theory (DFT) and time-dependent DFT. The dipole moments, frontier molecular orbital energies, absorption spectra, exciton binding energy (Eb), singlet–triplet energy gap (ΔEST), and electrostatic potential (ESP) of these molecules, and the estimated open circuit voltages (VOCs) of the OSCs with PC71BM as acceptor are presented. We find that (1) generally, halogen substitutions would increase VOC; (2) Eb rises with more fluorine substitutions, but for Cl and Br substitutions, Eb increases firstly and then drops; (3) ΔEST keeps increasing with more halogen substitutions; (4) except for Br substitutions, the averaged ESP arises along with more halogen substitutions; (5) the absorption strength of UV–Vis spectra of DRCN5T2F, DRCN5T4F, DRCN5T6F, and DRCN5T2Cl in the visible region is enhanced with respect to DRCN5T. Based on these results, overall, DRCN5T2Cl, DRCN5T4F, and DRCN5T6F may be promising donors.

Exploring the Photovoltaic Properties of Metal Bipyridine Complexes (Metal = Fe, Zn, Cr, and Ru) by Density Functional Theory

2018 ◽  
Vol 73 (4) ◽  
pp. 337-344 ◽  
Author(s):  
Ahmad Irfan ◽  
Ghulam Abbas
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Photovoltaic Performance ◽  
Open Circuit ◽  
Band Alignment ◽  
Structure Property ◽  
Ambient Conditions ◽  
Photovoltaic Properties ◽  
Functional Theory ◽  
Solar Cell Performance

AbstractThe synthesis and characterisation of mononuclear Fe complexes were carried out by using bipyridine (Compound 1) at ambient conditions. Additionally, three more derivatives were designed by substituting the central Fe metal with Zn, Cr, and Ru (Compound 2, Compound 3, and Compound 4), respectively. The ground state geometry calculations were carried out by using density functional theory (DFT) at B3LYP/6-31G** (LANL2DZ) level of theory. We shed light on the frontier molecular orbitals, electronic properties, photovoltaic parameters, and structure–property relationship. The open-circuit voltage is a promising parameter that considerably affects the photovoltaic performance; thus, we have estimated its value by considering the complexes as donors whereas TiO2 and/or Si were used as acceptors. The solar cell performance behaviour was also studied by shedding light on the band alignment and energy level offset.

DFT Study on Geometric and Electronic Structures Properties of Dye Sensitizers

2015 ◽  
Vol 748 ◽  
pp. 197-200
Author(s):  
Mei Juan Cao ◽  
Zhi Cheng Sun ◽  
Lu Hai Li ◽  
Yuan Bin She ◽  
Zuo Lin Yang ◽  
...  
Keyword(s):  
Electronic Transport ◽  
Electronic Structures ◽  
Energy Barrier ◽  
Density Functional ◽  
Energy Gap ◽  
Frontier Molecular Orbital ◽  
Central Metal ◽  
Functional Theory ◽  
Homo And Lumo ◽  
Porphyrin Core

A series of porphyrin sensitizers with different central metal ions (PMn, PFe, PCo, PNi, PCu, and PZn) have been studied based on density functional theory (DFT). The geometric structure of the dyes was optimized and the frontier molecular orbital were calculated. The result shows that the LUMO levels of PFe, PNi and PZn were much lower than that of PMn, PCo and PCu, which suggest a lower energy barrier for electron transfer from the donor to the acceptor tunneling. Furthermore, the energy gap of HOMO and LUMO for PFe was only 0.81 eV, it indicates a significant red shift of the absorption spectrum. The LUMO of PMn, PNi, PCu and PZn were mainly decocalized on the porphyrin core and the bridge moiety, which was beneficial to electronic transport.

Saturated N,X-Heterocyclic Carbenes (X=N, O, S, P, Si, C, and B): Stability, Nucleophilicity, and Basicity

2015 ◽  
Vol 68 (9) ◽  
pp. 1438 ◽  
Author(s):  
Zahra Azizi ◽  
Mehdi Ghambarian ◽  
Mohammad A. Rezaei ◽  
Mohammad Ghashghaee
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Energy Difference ◽  
Heterocyclic Carbenes ◽  
Structure Stability ◽  
Triplet Energy ◽  
Lumo Energy ◽  
Dft Methods ◽  
Functional Theory ◽  
Homo Lumo

Various saturated five-membered N,X-heterocyclic carbenes (X = N, O, S, P, Si, C, and B) have been studied by ab initio and density functional theory (DFT) methods. The substitutions alter the properties of the reference carbene from the viewpoint of electronic structure, stability, nucleophilicity, and basicity. Our study shows that the oxygen containing carbene (X = O) induces the highest HOMO–LUMO energy gap (ΔEHOMO–LUMO), while carbene with X = N has the widest singlet–triplet energy difference (ΔEs–t). The nucleophilicity of the carbene derivatives increased upon replacement of C, Si, and B, with the effect of the boron substituent being more pronounced. In addition, the basicity of the structure increased for the carbene derivatives with X = C and B with the latter substitution imposing a remarkably higher effect. Moreover, the substitution of boron at the α-position of the carbene increased the nucleophilicity and basicity, while inducing a reduction in the values of ΔEs–t and ΔEHOMO–LUMO.

scholarly journals Molecular engineering of indenoindene-3-ethylrodanine acceptors with A2-A1-D-A1-A2 architecture for promising fullerene-free organic solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Khalid ◽  
Momina ◽  
Muhammad Imran ◽  
Muhammad Fayyaz ur Rehman ◽  
Ataualpa Albert Carmo Braga ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Charge Transfer ◽  
Organic Solar Cells ◽  
Density Functional ◽  
Energy Gap ◽  
Molecular Engineering ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
Acceptor Molecules

AbstractConsidering the increased demand and potential of photovoltaic devices in clean, renewable electrical and hi-tech applications, non-fullerene acceptor (NFA) chromophores have gained significant attention. Herein, six novel NFA molecules IBRD1–IBRD6 have been designed by structural modification of the terminal moieties from experimentally synthesized A2-A1-D-A1-A2 architecture IBR for better integration in organic solar cells (OSCs). To exploit the electronic, photophysical and photovoltaic behavior, density functional theory/time dependent-density functional theory (DFT/TD-DFT) computations were performed at M06/6-311G(d,p) functional. The geometry, electrical and optical properties of the designed acceptor molecules were compared with reported IBR architecture. Interestingly, a reduction in bandgap (2.528–2.126 eV), with a broader absorption spectrum, was studied in IBR derivatives (2.734 eV). Additionally, frontier molecular orbital findings revealed an excellent transfer of charge from donor to terminal acceptors and the central indenoindene-core was considered responsible for the charge transfer. Among all the chromophores, IBRD3 manifested the lowest energy gap (2.126 eV) with higher λmax at 734 and 745 nm in gaseous phase and solvent (chloroform), respectively due to the strong electron-withdrawing effect of five end-capped cyano groups present on the terminal acceptor. The transition density matrix map revealed an excellent charge transfer from donor to terminal acceptors. Further, to investigate the charge transfer and open-circuit voltage (Voc), PBDBT donor polymer was blended with acceptor chromophores, and a significant Voc (0.696–1.854 V) was observed. Intriguingly, all compounds exhibited lower reorganization and binding energy with a higher exciton dissociation in an excited state. This investigation indicates that these designed chromophores can serve as excellent electron acceptor molecules in organic solar cells (OSCs) that make them attractive candidates for the development of scalable and inexpensive optoelectronic devices.

scholarly journals Exploration of promising optical and electronic properties of (non-polymer) small donor molecules for organic solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Khalid ◽  
Muhammad Usman Khan ◽  
Saeed Ahmed ◽  
Zahid Shafiq ◽  
Mohammed Mujahid Alam ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Organic Solar Cells ◽  
Density Functional ◽  
Reorganization Energy ◽  
Energy Difference ◽  
Open Circuit ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
Td Dft

AbstractNon-fullerene based organic compounds are considered promising materials for the fabrication of modern photovoltaic materials. Non-fullerene-based organic solar cells comprise of good photochemical and thermal stability along with longer device lifetimes as compared to fullerene-based compounds. Five new non-fullerene donor molecules were designed keeping in view the excellent donor properties of 3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2ethylhexyl) benzo[1,2-:4,5-c′]-dithiophene-4,8-dione thiophene-alkoxy benzene-thiophene indenedione (BDD-IN) by end-capped modifications. Photovoltaic and electronic characteristics of studied molecules were determined by employing density functional theory (DFT) and time dependent density functional theory (TD-DFT). Subsequently, obtained results were compared with the reference molecule BDD-IN. The designed molecules presented lower energy difference (ΔΕ) in the range of 2.17–2.39 eV in comparison to BDD-IN (= 2.72 eV). Moreover, insight from the frontier molecular orbital (FMO) analysis disclosed that central acceptors are responsible for the charge transformation. The designed molecules were found with higher λmax values and lower transition energies than BDD-IN molecule due to stronger end-capped acceptors. Open circuit voltage (Voc) was observed in the higher range (1.54–1.78 V) in accordance with HOMOdonor–LUMOPC61BM by designed compounds when compared with BDD-IN (1.28 V). Similarly, lower reorganization energy values were exhibited by the designed compounds in the range of λe(0.00285–0.00370 Eh) and λh(0.00847–0.00802 Eh) than BDD-IN [λe(0.00700 Eh) and λh(0.00889 Eh)]. These measurements show that the designed compounds are promising candidates for incorporation into solar cell devices, which would benefit from better hole and electron mobility.

scholarly journals DFT and TD-DFT Study of Only First Diaminomalenonitrile Based Molecular Receptor for Fluoride Anion: Correlation of Calculated and Experimental Results

2021 ◽  
Vol 13 (3) ◽  
pp. 923-933
Author(s):  
M. A. Kaloo ◽  
H. Bashir ◽  
M. A. Rather ◽  
S. A. Majid ◽  
B. A. Bhat
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Atomic Orbital ◽  
Basis Set ◽  
Frontier Molecular Orbital ◽  
Fluoride Anion ◽  
Functional Theory ◽  
Sensing Mechanism ◽  
Td Dft

In this work, the sensing mechanism of a novel anion receptor, 2-amino-((E)-(4-cyanobenzalidine) amino) maleonitrile reported by Sankar et al. (Analyst 138:4760-4763, 2013) was investigated theoretically with the help of density functional theory (DFT) and time-dependent density functional theory (TD-DFT). From the frontier molecular orbital analysis, it is reasonable to support the proposed charge transfer (ICT) enhancement in the receptor molecule in the presence of F−. A significant reduction in the energy gap (ΔE) from 4.014 eV to 2.342eV between highest occupied and lowest unoccupied energy levels was revealed, leading to the strong redshift of its absorption characteristics. Moreover, 1H NMR was also calculated to further understand the mechanistic insights by using the gauge independent atomic orbital (GIAO) method with B3LYP methods and the 6-311++G (d,p) basis set. The spectra were simulated, and the chemical shifts linked to TMS were compared with experimental. Besides, Intrinsic Reaction Coordinates (IRC) were also calculated to understand the sensing mechanism.

scholarly journals Physicochemical, antioxidant properties of carotenoids and its optoelectronic and interaction studies with chlorophyll pigments

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ruby Srivastava
Keyword(s):  
Density Functional Theory ◽  
Antioxidant Activity ◽  
Gas Phase ◽  
Density Functional ◽  
Energy Gap ◽  
Antioxidant Properties ◽  
Visible Region ◽  
State Theory ◽  
Chemical Hardness ◽  
Functional Theory

AbstractThe physicochemical and antioxidant properties of seven carotenoids: antheraxanthin, β-carotene, neoxanthin, peridinin, violaxanthin, xanthrophyll and zeaxanthin were studied by theoretical means. Then the Optoelectronic properties and interaction of chlorophyll-carotenoid complexes are analysed by TDDFT and IGMPLOT. Global reactivity descriptors for carotenoids and chlorophyll (Chla, Chlb) are calculated via conceptual density functional theory (CDFT). The higher HOMO–LUMO (HL) gap indicated structural stability of carotenoid, chlorophyll and chlorophyll-carotenoid complexes. The chemical hardness for carotenoids and Chlorophyll is found to be lower in the solvent medium than in the gas phase. Results showed that carotenoids can be used as good reactive nucleophile due to lower µ and ω. As proton affinities (PAs) are much lower than the bond dissociation enthalpies (BDEs), it is anticipated that direct antioxidant activity in these carotenoids is mainly due to the sequential proton loss electron transfer (SPLET) mechanism with dominant solvent effects. Also lower PAs of carotenoid suggest that antioxidant activity by the SPLET mechanism should be a result of a balance between proclivities to transfer protons. Reaction rate constant with Transition-State Theory (TST) were estimated for carotenoid-Chlorophyll complexes in gas phase. Time dependent Density Functional Theory (TDDFT) showed that all the chlorophyll (Chla, Chlb)–carotenoid complexes show absorption wavelength in the visible region. The lower S1–T1 adiabatic energy gap indicated ISC transition from S1 to T1 state.

Theoretical investigation on vibrational spectroscopic and nonlinear optical activity of 1-(4-chloro phenyl)-3-(4-dimethylamino phenyl) prop-2-en-1-one

2017 ◽  
Vol 95 (4) ◽  
pp. 353-360
Author(s):  
Xiao-Hong Li ◽  
Hong-Ling Cui ◽  
Rui-Zhou Zhang
Keyword(s):  
Density Functional ◽  
Nonlinear Optical ◽  
Energy Gap ◽  
Density Functional Theory Method ◽  
Nbo Analysis ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Electron Donation ◽  
Homo Lumo

The density functional theory method was used to calculate the vibrational spectrum, geometrical structure of 1-(4-chloro phenyl)-3-(4-dimethylamino phenyl) prop-2-en-1-one in the ground state. The analysis of natural bond orbital (NBO) was also performed. The infrared spectrum was obtained and interpreted by means of potential energies distributions. NBO analysis shows that electron donation from LP(1)N atom to the anti-bonding acceptor σ*(C6–C12) of the phenyl ring results in the stabilization of 43.9 kJ/mol. The predicted NLO properties show that the βtot of the title compound is larger than that of urea and is a good candidate as a nonlinear optical material. In addition, the frontier molecular orbital is also investigated. The high βtot value and the low HOMO–LUMO energy gap assert the suitability of the grown crystal for NLO applications.

scholarly journals X-ray diffraction and Density Functional Theory based structural analyses of 2-phenyl-4-(prop-2-yn-1-yl)-1,2,4-triazolone

2021 ◽  
Vol 12 (4) ◽  
pp. 459-468
Author(s):  
Shilpa Mallappa Somagond ◽  
Ahmedraza Mavazzan ◽  
Suresh Fakkirappa Madar ◽  
Madivalagouda Sannaikar ◽  
Shankar Madan Kumar ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Basis Set ◽  
Frontier Molecular Orbital ◽  
Geometrical Parameters ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray

This study is composed of X-ray diffraction and Density Functional Theory (DFT) based molecular structural analyses of 2-phenyl-4-(prop-2-yn-1-yl)-2,4-dihydro-3H-1,2,4-triazol-3-one (2PPT). Crystal data for C11H9N3O: Monoclinic, space group P21/c (no. 14), a = 7.8975(2) Å, b = 11.6546(4) Å, c = 11.0648(3) Å, β = 105.212(2)°, V = 982.74(5) Å3, Z = 4, T = 296.15 K, μ(MoKα) = 0.091 mm-1, Dcalc = 1.346 g/cm3, 13460 reflections measured (5.174° ≤ 2Θ ≤ 64.72°), 3477 unique (Rint = 0.0314, Rsigma = 0.0298) which were used in all calculations. The final R1 was 0.0470 (I > 2σ(I)) and wR2 was 0.1368 (all data). The experimentally determined data was supported by theoretically optimized calculations processed with the help of Hartree-Fock (HF) technique and Density Functional Theory with the 6-311G(d,p) basis set in the ground state. Geometrical parameters (Bond lengths and angles) as well as spectroscopic (FT-IR, 1H NMR, and 13C NMR) properties of 2PPT molecule has been optimized theoretically and compared with the experimentally obtained results. Hirshfeld surface analysis with 2D fingerprinting plots was used to figure out the possible and most significant intermolecular interactions. The electronic characterizations such as molecular electrostatic potential map (MEP) and Frontier molecular orbital (FMO) energies have been studied by DFT/B3LYP approach. The MEP imparted the detailed information regarding electronegative and electropositive regions across the molecule. The HOMO-LUMO energy gap as high as 5.3601 eV was found to be responsible for the high kinetic stability of the 2PPT.

scholarly journals Structural, Electronic, Molecular Orbital Analysis and Charge Distributions on Nitrate Salt of Guanidine through DFT and TD-DFT Methods

2021 ◽  
Vol 33 (8) ◽  
pp. 1905-1910
Author(s):  
S. Thangarasu ◽  
V. Siva ◽  
A. Shameem ◽  
A. Murugan ◽  
S. Athimoolam ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Ion Pairs ◽  
Frontier Molecular Orbital ◽  
Mulliken Charge ◽  
Functional Theory ◽  
Td Dft ◽  
Guanidinium Nitrate

Guanidinium nitrate, a non-linear optical material has been systematically studied through quantum chemical (density functional theory and Hartree Fock) methods. Studies on Mulliken charge, Frontier molecular orbitals (FMOs) and hyperpolarizability analyses have been performed. The Mulliken population analyses were carried out for the optimized molecular geometry by HF and B3LYP methods with 6-311++G(d,p) levels. The molecular orbital parameters of guanidinium nitrate have been calculated by FMO analysis. Frontier molecular orbital (FMO) analysis indicates the electron delocalization on the guanidinium nitrate and also its low value of energy gap indicates electron transfer. Optical property has been investigated by time-dependent density functional theory (TD-DFT) calculation. The second-order hyperpolarizability value of the ion pairs is much greater than urea, which confirms the good NLO nature of guanidinium nitrate.

Sign in / Sign up

Export Citation Format

Share Document