scholarly journals Bidimensional Polyiodide Netting Stabilized by a Cu(II) Macrocyclic Complex

Inorganics ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 12
Author(s):  
Matteo Savastano ◽  
Valeria Monini ◽  
Carla Bazzicalupi ◽  
Antonio Bianchi
Keyword(s):  
Crystal Structure ◽  
Crystal Engineering ◽  
Ternary Complex ◽  
Xrd Analysis ◽  
Binding Mode ◽  
Macrocyclic Complex ◽  
Redox Processes ◽  
Complex Stability ◽  
Formation Kinetic ◽  
The Stability

Iodine-dense polyiodide phases are interesting materials for a number of potential uses, including batteries and solid-state conductors. The incorporation of transition metal cations is considered a promising way to enhance the stability, tune the properties, and influence the architecture of polyiodides. However, several interesting metals, including Cu(II), may suffer redox processes, which generally make them not compatible with the I2/I− redox couple. Herein L, a simple derivative of cyclen, is proposed as a Cu(II) ligand capable of protecting the +2 oxidation state of the metal even in the presence of polyiodides. With a step by step approach, we report the crystal structure of free L; then we present spectrophotometric verification of Cu(II) complex stability, stoichiometry, and formation kinetic in DMF solution, together with Cu(II) binding mode elucidation via XRD analysis of [Cu(L)Cl]ClO4∙CH3CN crystals; afterwards, the stability of the CuL complex in the presence of I− is demonstrated in DMF solution, where the formation of a Cu:L:I− ternary complex, rather than reduction to Cu(I), is observed; lastly, polyiodide crystals are prepared, affording the [Cu(L)I]2I3I5 crystal structure. This layered structure is highly peculiar due to its chiral arrangement, opening further perspective for the crystal engineering of polyiodide phases.

scholarly journals Structural Basis and Binding Kinetics of Vaborbactam in Class A β-Lactamase Inhibition

2020 ◽  
Vol 64 (10) ◽  
Author(s):  
Orville A. Pemberton ◽  
Ruslan Tsivkovski ◽  
Maxim Totrov ◽  
Olga Lomovskaya ◽  
Yu Chen
Keyword(s):  
Crystal Structure ◽  
Covalent Bond ◽  
Binding Mode ◽  
Binding Kinetics ◽  
Structural Basis ◽  
Inhibition Mechanism ◽  
Class A ◽  
Reversible Covalent ◽  
The Stability ◽  
M 14

ABSTRACT Class A β-lactamases are a major cause of β-lactam resistance in Gram-negative bacteria. The recently FDA-approved cyclic boronate vaborbactam is a reversible covalent inhibitor of class A β-lactamases, including CTX-M extended-spectrum β-lactamase and KPC carbapenemase, both frequently observed in the clinic. Intriguingly, vaborbactam displayed different binding kinetics and cell-based activity for these two enzymes, despite their similarity. A 1.0-Å crystal structure of CTX-M-14 demonstrated that two catalytic residues, K73 and E166, are positively charged and neutral, respectively. Meanwhile, a 1.25-Å crystal structure of KPC-2 revealed a more compact binding mode of vaborbactam versus CTX-M-14, as well as alternative conformations of W105. Together with kinetic analysis of W105 mutants, the structures demonstrate the influence of this residue and the unusual conformation of the β3 strand on the inactivation rate, as well as the stability of the reversible covalent bond with S70. Furthermore, studies of KPC-2 S130G mutant shed light on the different impacts of S130 in the binding of vaborbactam versus avibactam, another recently approved β-lactamase inhibitor. Taken together, these new data provide valuable insights into the inhibition mechanism of vaborbactam and future development of cyclic boronate inhibitors.

scholarly journals Structure and Physical Properties of Cardamonin: A Spectroscopic and Computational Approach

Molecules ◽  
2020 ◽  
Vol 25 (18) ◽  
pp. 4070 ◽  
Author(s):  
Iwona Budziak ◽  
Marta Arczewska ◽  
Daniel M. Kamiński
Keyword(s):  
Crystal Structure ◽  
Crystal Lattice ◽  
Density Functional ◽  
Xrd Analysis ◽  
Biological Properties ◽  
Molecular Structures ◽  
Functional Theory ◽  
Water Fractions ◽  
The Stability ◽  
Single Crystal Xrd Analysis

This is the first study of the crystal structure of cardamonin (CA) confirmed using single-crystal XRD analysis. In the crystal lattice of CA, two symmetry independent molecules are linked by hydrogen bonds within the layers and by the π···π stacking interactions in the columns which lead to the occurrence of two types of conformations among the CA molecules in the crystal structure. To better understand the stability of these arrangements in both crystals and the gaseous phase, seven different CA dimers were theoretically calculated. The molecular structures were optimized using density functional theory (DFT) at the B3LYP/6–311G+(d,p) level and the spectroscopic results were compared. It was found that the calculated configurations of dimer I and III were almost identical to the ones found in the CA crystal lattice. The calculated UV-Vis spectra for the CA monomer and dimer I were perfectly consistent with the experimental spectroscopic data. Furthermore, enhanced emissions induced by aggregated CA molecules were registered in the aqueous solution with the increase of water fractions. The obtained results will help to further understand the relation between a variety of conformations and the biological properties of CA, and the results are also promising in terms of the applicability of CA as a bioimaging probe to monitor biological processes.

Structural, Thermal and Electrical Properties of Doped Poly(3,4 ethylenedioxythiophene)

2016 ◽  
Vol 10 (4) ◽  
pp. 395-400 ◽  
Author(s):  
Deepali Kelkar ◽  
◽  
Ashish Chourasia ◽  
◽  
Keyword(s):  
Crystal Structure ◽  
Electrical Properties ◽  
Xrd Analysis ◽  
Structure Modification ◽  
Camphorsulfonic Acid ◽  
Thermal And Electrical Properties ◽  
Ft Ir

Poly(3,4-ethylenedioxythiophene) (PEDOT) was chemically synthesized, undoped and then re-doped using FeCl3 as well as camphorsulfonic acid (CSA). FT-IR results confirm the nature of the synthesized and doped samples. XRD analysis indicates crystal structure modification after doping and was also used to calculate crystallinity of samples. Crystallinity increases after FeCl3 doping, whereas it reduces due to CSA doping. TGA-DTA results show reduction in Tg value for FeCl3 doped sample while it increases for CSA doped samples compared to that of undoped PEDOT. Reduction in Tg indicates plasticizing effect of FeCl3 whereas increase in Tg show anti-plasticizing effect of CSA in PEDOT. Conductivity value () increases by two orders of magnitude after doping. Log vs. 1/T graph show metallic nature of undoped PEDOT above 308 K, however both doped samples show semiconducting nature from 301 to 383 K.

Ruthenium(II) Complexes Bearing Thioether-Appended α- Iminopyridine Ligands: Arene Precursors Permit Access to K2-N,N and K3-N,N,S Complexes

2019 ◽  
Author(s):  
Victoria A. Ternes ◽  
Hannah A. Morgan ◽  
Austin P. Lanquist ◽  
Michael P. Murray ◽  
Bradley Wile
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Strong Field ◽  
Active Role ◽  
Binding Mode ◽  
Phenethyl Alcohol ◽  
Ru Complexes

Herein we report the preparation of a series of Ru(II) complexes featuring alpha-iminopyridine ligands bearing thioether functionality (NNS<sup>R</sup>, where R = Me, CH<sub>2</sub>Ph, Ph). Metallation using (<i>p</i> cymene)RuCl dimer permits access to (k<sup>2</sup>-N,N)Ru complexes in which the thioether moiety remains uncoordinated. In the presence of a strong field ligand such as acetonitrile or triphenylphosphine, the p-cymene moiety is displaced, and the ligand adopts a k<sup>3</sup>-N,N,S binding mode. These complexes are characterized using a combination of solution and solid state methods, including the crystal structure of [(NNS<sup>Me</sup>)Ru(NCMe)<sub>2</sub>Cl]Cl. The k<sup>2</sup>-N,N Ru(II) complexes are shown to serve as efficient precatalysts for the oxidation of sec-phenethyl alcohol at 5 mol% loadings, using a variety of external oxidants and solvents. The complex bearing an S-Ph donor was found to be the most active of those surveyed, suggesting that the thioether donor plays an active role in catalyst speciation for this transformation.

scholarly journals Contact map based crystal structure prediction using global optimization

CrystEngComm ◽  
2021 ◽  
Author(s):  
Jianjun Hu ◽  
Wenhui Yang ◽  
Rongzhi Dong ◽  
Yuxin Li ◽  
Xiang Li ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Global Optimization ◽  
Crystal Engineering ◽  
Structure Prediction ◽  
Crystal Structure Prediction ◽  
New Materials ◽  
Contact Map

Crystal structure prediction is now playing an increasingly important role in the discovery of new materials or crystal engineering.

scholarly journals Crystal structures of Ca2+–calmodulin bound to NaV C-terminal regions suggest role for EF-hand domain in binding and inactivation

2019 ◽  
Vol 116 (22) ◽  
pp. 10763-10772 ◽  
Author(s):  
Bernd R. Gardill ◽  
Ricardo E. Rivera-Acevedo ◽  
Ching-Chieh Tung ◽  
Filip Van Petegem
Keyword(s):  
Crystal Structure ◽  
Binding Sites ◽  
Binding Mode ◽  
Conformational Switch ◽  
Channel Inactivation ◽  
Dependent Inactivation ◽  
Ef Hand ◽  
Inherited Arrhythmia ◽  
A Site

Voltage-gated sodium (NaV) and calcium channels (CaV) form targets for calmodulin (CaM), which affects channel inactivation properties. A major interaction site for CaM resides in the C-terminal (CT) region, consisting of an IQ domain downstream of an EF-hand domain. We present a crystal structure of fully Ca2+-occupied CaM, bound to the CT of NaV1.5. The structure shows that the C-terminal lobe binds to a site ∼90° rotated relative to a previous site reported for an apoCaM complex with the NaV1.5 CT and for ternary complexes containing fibroblast growth factor homologous factors (FHF). We show that the binding of FHFs forces the EF-hand domain in a conformation that does not allow binding of the Ca2+-occupied C-lobe of CaM. These observations highlight the central role of the EF-hand domain in modulating the binding mode of CaM. The binding sites for Ca2+-free and Ca2+-occupied CaM contain targets for mutations linked to long-QT syndrome, a type of inherited arrhythmia. The related NaV1.4 channel has been shown to undergo Ca2+-dependent inactivation (CDI) akin to CaVs. We present a crystal structure of Ca2+/CaM bound to the NaV1.4 IQ domain, which shows a binding mode that would clash with the EF-hand domain. We postulate the relative reorientation of the EF-hand domain and the IQ domain as a possible conformational switch that underlies CDI.

Sign in / Sign up

Export Citation Format

Share Document