scholarly journals Bioprinting and In Vitro Characterization of an Eggwhite-Based Cell-Laden Patch for Endothelialized Tissue Engineering Applications

2021 ◽  
Vol 12 (3) ◽  
pp. 45
Author(s):  
Yasaman Delkash ◽  
Maxence Gouin ◽  
Tanguy Rimbeault ◽  
Fatemeh Mohabatpour ◽  
Petros Papagerakis ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Sodium Alginate ◽  
Vascular Endothelial Cells ◽  
Three Dimensional ◽  
Heart Tissue ◽  
Biological Properties ◽  
3D Bioprinting ◽  
Engineering Applications ◽  
In Vitro Characterization

Three-dimensional (3D) bioprinting is an emerging fabrication technique to create 3D constructs with living cells. Notably, bioprinting bioinks are limited due to the mechanical weakness of natural biomaterials and the low bioactivity of synthetic peers. This paper presents the development of a natural bioink from chicken eggwhite and sodium alginate for bioprinting cell-laden patches to be used in endothelialized tissue engineering applications. Eggwhite was utilized for enhanced biological properties, while sodium alginate was used to improve bioink printability. The rheological properties of bioinks with varying amounts of sodium alginate were examined with the results illustrating that 2.0–3.0% (w/v) sodium alginate was suitable for printing patch constructs. The printed patches were then characterized mechanically and biologically, and the results showed that the printed patches exhibited elastic moduli close to that of natural heart tissue (20–27 kPa) and more than 94% of the vascular endothelial cells survived in the examination period of one week post 3D bioprinting. Our research also illustrated the printed patches appropriate water uptake ability (>1800%).

scholarly journals Fabrication of Piezoelectric Electrospun Termite Nest-like 3D Scaffolds for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7684
Author(s):  
Thanapon Muenwacha ◽  
Oratai Weeranantanapan ◽  
Nuannoi Chudapongse ◽  
Francisco Javier Diaz Sanchez ◽  
Santi Maensiri ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Vinylidene Fluoride ◽  
Three Dimensional ◽  
Cell Interaction ◽  
Biological Properties ◽  
Engineering Applications ◽  
3D Scaffolds ◽  
3D Shapes ◽  
Termite Nest

A high piezoelectric coefficient polymer and biomaterial for bone tissue engineering— poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)—has been successfully fabricated into 3D scaffolds using the wet electrospinning method. Three-dimensional (3D) scaffolds have significant advantages for tissue engineering applications. Electrospinning is an advanced method and can fabricate 3D scaffolds. However, it has some limitations and is difficult to fabricate nanofibers into 3D shapes because of the low controllability of porosity and internal pore shape. The PVDF-HFP powders were dissolved in a mixture of acetone and dimethylformamide with a ratio of 1:1 at various concentrations of 10, 13, 15, 17, and 20 wt%. However, only the solutions at 15 and 17 wt% with optimized electrospinning parameters can be fabricated into biomimetic 3D shapes. The produced PVDF-HFP 3D scaffolds are in the cm size range and mimic the structure of the natural nests of termites of the genus Apicotermes. In addition, the 3D nanofiber-based structure can also generate more electrical signals than the conventional 2D ones, as the third dimension provides more compression. The cell interaction with the 3D nanofibers scaffold was investigated. The in vitro results demonstrated that the NIH 3T3 cells could attach and migrate in the 3D structures. While conventional electrospinning yields 2D (flat) structures, our bio-inspired electrospun termite nest-like 3D scaffolds are better suited for tissue engineering applications since they can potentially mimic native tissues as they have biomimetic structure, piezoelectric, and biological properties.

scholarly journals Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 794 ◽  
Author(s):  
Su Jeong Lee ◽  
Ji Min Seok ◽  
Jun Hee Lee ◽  
Jaejong Lee ◽  
Wan Doo Kim ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Sodium Alginate ◽  
Three Dimensional ◽  
Fibroblast Cell ◽  
Chemical Crosslinking ◽  
Fibroblast Cell Line ◽  
Engineering Applications ◽  
Encapsulated Cells ◽  
Crosslinking Agents

Bio-ink properties have been extensively studied for use in the three-dimensional (3D) bio-printing process for tissue engineering applications. In this study, we developed a method to synthesize bio-ink using hyaluronic acid (HA) and sodium alginate (SA) without employing the chemical crosslinking agents of HA to 30% (w/v). Furthermore, we evaluated the properties of the obtained bio-inks to gauge their suitability in bio-printing, primarily focusing on their viscosity, printability, and shrinkage properties. Furthermore, the bio-ink encapsulating the cells (NIH3T3 fibroblast cell line) was characterized using a live/dead assay and WST-1 to assess the biocompatibility. It was inferred from the results that the blended hydrogel was successfully printed for all groups with viscosities of 883 Pa∙s (HA, 0% w/v), 1211 Pa∙s (HA, 10% w/v), and 1525 Pa∙s, (HA, 30% w/v) at a 0.1 s−1 shear rate. Their structures exhibited no significant shrinkage after CaCl2 crosslinking and maintained their integrity during the culture periods. The relative proliferation rate of the encapsulated cells in the HA/SA blended bio-ink was 70% higher than the SA-only bio-ink after the fourth day. These results suggest that the 3D printable HA/SA hydrogel could be used as the bio-ink for tissue engineering applications.

scholarly journals Influences of Molecular Weights on Physicochemical and Biological Properties of Collagen-Alginate Scaffolds

Marine Drugs ◽  
2021 ◽  
Vol 19 (2) ◽  
pp. 85 ◽  
Author(s):  
Truc Cong Ho ◽  
Jin-Seok Park ◽  
Sung-Yeoul Kim ◽  
Hoyeol Lee ◽  
Ju-Sop Lim ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Subcritical Water ◽  
Biological Properties ◽  
Ethanol Solution ◽  
Water Soluble ◽  
Potential Candidate ◽  
High Porosity ◽  
Engineering Applications ◽  
Molecular Weights

For tissue engineering applications, biodegradable scaffolds containing high molecular weights (MW) of collagen and sodium alginate have been developed and characterized. However, the properties of low MW collagen-based scaffolds have not been studied in previous research. This work examined the distinctive properties of low MW collagen-based scaffolds with alginate unmodified and modified by subcritical water. Besides, we developed a facile method to cross-link water-soluble scaffolds using glutaraldehyde in an aqueous ethanol solution. The prepared cross-linked scaffolds showed good structural properties with high porosity (~93%) and high cross-linking degree (50–60%). Compared with collagen (6000 Da)-based scaffolds, collagen (25,000 Da)-based scaffolds exhibited higher stability against collagenase degradation and lower weight loss in phosphate buffer pH 7.4. Collagen (25,000 Da)-based scaffolds with modified alginate tended to improve antioxidant capacity compared with scaffolds containing unmodified alginate. Interestingly, in vitro coagulant activity assay demonstrated that collagen (25,000 Da)-based scaffolds with modified alginate (C25-A63 and C25-A21) significantly reduced the clotting time of human plasma compared with scaffolds consisting of unmodified alginate. Although some further investigations need to be done, collagen (25,000 Da)-based scaffolds with modified alginate should be considered as a potential candidate for tissue engineering applications.

scholarly journals In Vitro Characterization of Immune-Related Properties of Human Fetal Bone Cells for Potential Tissue Engineering Applications

2009 ◽  
Vol 15 (7) ◽  
pp. 1523-1532 ◽  
Author(s):  
Marc-Olivier Montjovent ◽  
Chiara Bocelli-Tyndall ◽  
Corinne Scaletta ◽  
Arnaud Scherberich ◽  
Silke Mark ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Cells ◽  
Engineering Applications ◽  
Fetal Bone ◽  
In Vitro Characterization

Modification of Thai Silk Fibroin Scaffolds by Gelatin Conjugation for Tissue Engineering

2008 ◽  
Vol 55-57 ◽  
pp. 685-688 ◽  
Author(s):  
J. Chamchongkaset ◽  
Sorada Kanokpanont ◽  
David L. Kaplan ◽  
Siriporn Damrongsakkul
Keyword(s):  
Tissue Engineering ◽  
Bombyx Mori ◽  
Silk Fibroin ◽  
Textile Industry ◽  
Three Dimensional ◽  
Biological Properties ◽  
Salt Leaching ◽  
Biological Compatibility ◽  
Salt Crystals

Silk has been used commercially as biomedical sutures for decades. Recently silk fibroin, especially from Bombyx mori silkworm, has been explored for many tissue engineering applications such as bone and cartilage due to its impressive biological compatibility and mechanical properties. In Thailand, Thai native silkworms have been long cultivated. Distinct characteristics of cocoon Thai silk are its yellow color and coarse filament. There is more sericin in Thai silk than in other Bombyx mori silks. These characteristics provide Thai silk a unique texture for textile industry. It is therefore the aim of this study to develop three-dimensional silk fibroin-based scaffolds from Thai yellow cocoon “Nangnoi-Srisaket” of Bombyx mori silkworms using salt-leaching method. To enhance the biological properties, type A gelatin, the denature form of collagen having good biocompactibility, was used to conjugate with silk fibroin scaffolds. The pore size of salt-leached silk fibroin scaffold structure represented the size of salt crystals used (600-710µm). After gelatin conjugation, gelatin was partly formed fibers inside the pores of silk fibroin scaffolds resulting in fiber-like structure with highly interconnection. Gelatin conjugation enhanced the compressive modulus of silk fibroin scaffolds by 93%. The results on in vitro culture using mouse osteoblast-like cells (MC3T3-E1) showed that gelatin conjugation could promote the cell proliferation in silk fibroin scaffolds. Moreover, the observed morphology of cells proliferated inside the scaffold after 14 days of culture showed the larger spreading area of cells on conjugated gelatin/silk fibroin scaffolds, compared to round-shaped cells on silk fibroin scaffolds. The results implied that Thai silk fibroin looked promising to be applied in tissue engineering and gelatin conjugation on Thai silk fibroin scaffolds could enhance the biological properties of scaffolds.

The Fabrication of Tissue Engineering Scaffolds by Inkjet Printing Technology

2018 ◽  
Vol 934 ◽  
pp. 129-133 ◽  
Author(s):  
Chao Fan Lv ◽  
Li Ya Zhu ◽  
Jian Ping Shi ◽  
Zong An Li ◽  
Wen Lai Tang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Sodium Alginate ◽  
Inkjet Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Tissue Engineering Scaffolds ◽  
Printing Technology ◽  
3D Printed ◽  
Inkjet Printing Technology ◽  
Alginate Scaffold

Three-dimensional (3D) printing has been playing an important role in diverse areas in medicine. In order to promote the development of tissue engineering, this study attempts to fabricate tissue engineering scaffolds using the inkjet printing technology. Sodium alginate, exhibiting similar properties to the native human extracellular matrix (ECM), was used as bioink. The jetted fluid of sodium alginate would be gelatinized when printed into the calcium chloride solution. The characteristics of the 3D-printed sodium alginate scaffold were systematically measured and analyzed. The results show that, the pore size, porosity and degradation property of these scaffolds could be well controlled. This study indicates the capability of 3D bioprinting technology for preparing tissue engineering scaffolds.

scholarly journals Three-dimensional cell printing of gingival fibroblast/acellular dermal matrix/gelatin–sodium alginate scaffolds and their biocompatibility evaluation in vitro

RSC Advances ◽  
2020 ◽  
Vol 10 (27) ◽  
pp. 15926-15935 ◽  
Author(s):  
Peng Liu ◽  
Qing Li ◽  
Qiaolin Yang ◽  
Shihan Zhang ◽  
Chunping Lin ◽  
...  
Keyword(s):  
Sodium Alginate ◽  
Three Dimensional ◽  
Acellular Dermal Matrix ◽  
Biological Properties ◽  
Gingival Fibroblast ◽  
Dermal Matrix ◽  
Cell Printing ◽  
Acellular Dermal ◽  
Dimensional Cell

3D cell printing of gingival fibroblast/acellular dermal matrix/gelatin–sodium alginate scaffolds showed satisfactory biological properties.

scholarly journals 3D Bioprinting of Human Tissues: Biofabrication, Bioinks and Bioreactors

2021 ◽  
Vol 22 (8) ◽  
pp. 3971
Author(s):  
Jianhua Zhang ◽  
Esther Wehrle ◽  
Marina Rubert ◽  
Ralph Müller
Keyword(s):  
Tissue Engineering ◽  
Human Tissue ◽  
Fluid Shear Stress ◽  
Pharmaceutical Research ◽  
Three Dimensional ◽  
Biological Tissues ◽  
Layer By Layer ◽  
Human Tissues ◽  
3D Bioprinting

The field of tissue engineering has progressed tremendously over the past few decades in its ability to fabricate functional tissue substitutes for regenerative medicine and pharmaceutical research. Conventional scaffold-based approaches are limited in their capacity to produce constructs with the functionality and complexity of native tissue. Three-dimensional (3D) bioprinting offers exciting prospects for scaffolds fabrication, as it allows precise placement of cells, biochemical factors, and biomaterials in a layer-by-layer process. Compared with traditional scaffold fabrication approaches, 3D bioprinting is better to mimic the complex microstructures of biological tissues and accurately control the distribution of cells. Here, we describe recent technological advances in bio-fabrication focusing on 3D bioprinting processes for tissue engineering from data processing to bioprinting, mainly inkjet, laser, and extrusion-based technique. We then review the associated bioink formulation for 3D bioprinting of human tissues, including biomaterials, cells, and growth factors selection. The key bioink properties for successful bioprinting of human tissue were summarized. After bioprinting, the cells are generally devoid of any exposure to fluid mechanical cues, such as fluid shear stress, tension, and compression, which are crucial for tissue development and function in health and disease. The bioreactor can serve as a simulator to aid in the development of engineering human tissues from in vitro maturation of 3D cell-laden scaffolds. We then describe some of the most common bioreactors found in the engineering of several functional tissues, such as bone, cartilage, and cardiovascular applications. In the end, we conclude with a brief insight into present limitations and future developments on the application of 3D bioprinting and bioreactor systems for engineering human tissue.

scholarly journals Naturally Derived Photoinitiators for Dental and Biomaterials Applications

2020 ◽  
Vol 1 (02) ◽  
pp. 72-78
Author(s):  
Mohamed Mahmoud Abdul-Monem
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Water Soluble ◽  
Polymerization Reaction ◽  
3D Bioprinting ◽  
Engineering Applications ◽  
Bonding Agents ◽  
Materials Used

AbstractBiocompatibility of materials used in dental and biomaterials applications is very important and depends on the components of these materials. Photopolymerized materials for dental and biomaterials applications have been progressively used since the 1970s. One of the crucial components in these materials is the photoinitiator (PI) that initiates the polymerization reaction. Synthetic PIs are the most commonly used types, but owing to their drawbacks such as cytotoxicity, insolubility in water, and high cost, research on naturally derived (bio-sourced) PIs is growing, to find an alternative to these synthetic types, especially in the growing field of three-dimensional (3D) printing and bioprinting of biomaterials for tissue engineering applications. Naturally derived PIs are biocompatible, highly water-soluble, and abundant. Naturally derived PIs have been used to prepare experimental dentine bonding agents, dentine primers, photo-crosslinked hydrogels for tissue engineering applications, antibacterial coatings, guided tissue regeneration membranes, and 3D printed biomaterials. An electronic search was done using MEDLINE/PubMed and Scopus databases using the keywords naturally derived, bio-sourced, PIs, dental, biomaterials, 3D printing, and 3D bioprinting, to review potential naturally derived PIs for dental and biomaterials applications. There are a variety of naturally derived PIs with various colors and absorption spectra to choose from, according to the intended application. Most of naturally derived PIs can be used with modern conventional dental light curing units, making them applicable for experimental studies for potential dental and biomaterials applications. Due to their biocompatibility and availability it is expected that in the upcoming years, research on naturally derived PIs and their dental and biomaterials applications will increase especially in the growing field of 3D bioprinting in which cell viability is essential; thus this review was done.

Hierarchical porous materials for tissue engineering

2005 ◽  
Vol 364 (1838) ◽  
pp. 263-281 ◽  
Author(s):  
Julian R Jones ◽  
Peter D Lee ◽  
Larry L Hench
Keyword(s):  
Tissue Engineering ◽  
Porous Materials ◽  
Materials Science ◽  
Three Dimensional ◽  
Hierarchical Structures ◽  
Engineering Applications ◽  
Culture Techniques ◽  
Tissue Replacement ◽  
Hierarchical Porous

Biological organisms have evolved to produce hierarchical three-dimensional structures with dimensions ranging from nanometres to metres. Replicating these complex living hierarchical structures for the purpose of repair or replacement of degenerating tissues is one of the great challenges of chemistry, physics, biology and materials science. This paper describes how the use of hierarchical porous materials in tissue engineering applications has the potential to shift treatments from tissue replacement to tissue regeneration. The criteria that a porous material must fulfil to be considered ideal for bone tissue engineering applications are listed. Bioactive glass foam scaffolds have the potential to fulfil all the criteria, as they have a hierarchical porous structure similar to that of trabecular bone, they can bond to bone and soft tissue and they release silicon and calcium ions that have been found to up-regulate seven families of genes in osteogenic cells. Their hierarchical structure can be tailored for the required rate of tissue bonding, resorption and delivery of dissolution products. This paper describes how the structure and properties of the scaffolds are being optimized with respect to cell response and that tissue culture techniques must be optimized to enable growth of new bone in vitro .

Sign in / Sign up

Export Citation Format

Share Document