scholarly journals Signed Real-Time Delay Multiply and Sum Beamforming for Multispectral Photoacoustic Imaging

2018 ◽  
Vol 4 (10) ◽  
pp. 121 ◽  
Author(s):  
Thomas Kirchner ◽  
Franz Sattler ◽  
Janek Gröhl ◽  
Lena Maier-Hein
Keyword(s):  
Open Source ◽  
Real Time ◽  
Photoacoustic Imaging ◽  
Signal To Noise Ratio ◽  
Ultrasound Transducers ◽  
Full Spectrum ◽  
Simple Implementation

Reconstruction of photoacoustic (PA) images acquired with clinical ultrasound transducers is usually performed using the Delay and Sum (DAS) beamforming algorithm. Recently, a variant of DAS, referred to as Delay Multiply and Sum (DMAS) beamforming has been shown to provide increased contrast, signal-to-noise ratio (SNR) and resolution in PA imaging. The main reasons for the use of DAS beamforming in photoacoustics are its simple implementation, real-time capability, and the linearity of the beamformed image to the PA signal. This is crucial for the identification of different chromophores in multispectral PA applications. In contrast, current DMAS implementations are not responsive to the full spectrum of sound frequencies from a photoacoustic source and have not been shown to provide a reconstruction linear to the PA signal. Furthermore, due to its increased computational complexity, DMAS has not been shown yet to work in real-time. Here, we present an open-source real-time variant of the DMAS algorithm, signed DMAS (sDMAS), that ensures linearity in the original PA signal response while providing the increased image quality of DMAS. We show the applicability of sDMAS for multispectral PA applications, in vitro and in vivo. The sDMAS and reference DAS algorithms were integrated in the open-source Medical Imaging Interaction Toolkit (MITK) and are available as real-time capable implementations.

scholarly journals Real-time and noninvasive tracking of injectable hydrogel degradation using functionalized AIE nanoparticles

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2063-2075
Author(s):  
Mengdi Zhang ◽  
Zengliang Wang ◽  
Pengzhou Huang ◽  
Guanwei Jiang ◽  
Changpeng Xu ◽  
...  
Keyword(s):  
Real Time ◽  
Photoacoustic Imaging ◽  
Fluorescent Detection ◽  
Interference Factor ◽  
Aggregation Induced Emission ◽  
Visual Degradation ◽  
Degradation Degree ◽  
Hydrogel System

AbstractVisually monitoring of the residual morphology and quantitatively determining the degradation degree of hydrogels applied in tissue repair therapy in a real-time and noninvasive manner were a crucial technological mean. Despite conventional organic fluorescent molecules commonly used as probe to capture the real-time clues of the labeled hydrogels, they still encounter obstacles, including intrinsic photobleaching, cytotoxicity, and unknown interference factor of degradation caused by the change from polymer structure of hydrogels, thus making it difficult to accurately obtain the information of the hydrogels in vivo. To address the hard nut, we designed the multifunctional hydrogel system with a real-time quantitative aggregation-induced emission fluorescent detection and photoacoustic imaging tracking based on tetraphenylethene (TPE) that possesses the trait of aggregation-induced emission and low photobleaching, bound on the surface of mesoporous dopamine microspheres (MPDAs), and subsequently loaded into the photo-crosslinked injectable hydrogels. In vitro results showed that MPDA-TPE had good compatibility, emitted strong fluorescence when embedded in hydrogels, and maintained stable fluorescence property unless the hydrogels were degraded. Meanwhile, a mathematical formula for the kinetic degradation of hydrogels was established between gravitational and visual degradation in vitro, which can be used to predict in vivo degradation. Furthermore, MPDA possessed the clear photoacoustic imaging effect to provide more accurate clues. The designed hydrogel system holds a potential role in prediction of the in vivo degradation of implanted materials in an accurate, convenient, and real-time noninvasive manner and is a meaningful treatment aid in tissue engineering.

scholarly journals An Adjustable Dark-Field Acoustic-Resolution Photoacoustic Imaging System with Fiber Bundle-Based Illumination

Biosensors ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 262
Author(s):  
Yuhling Wang ◽  
De-Fu Jhang ◽  
Tsung-Sheng Chu ◽  
Chia-Hui Tsao ◽  
Chia-Hua Tsai ◽  
...  
Keyword(s):  
Real Time ◽  
Imaging System ◽  
Structural Information ◽  
Photoacoustic Imaging ◽  
Biological Tissues ◽  
Dark Field ◽  
Design Concept ◽  
High Frequency Ultrasound

Photoacoustic (PA) imaging has become one of the major imaging methods because of its ability to record structural information and its high spatial resolution in biological tissues. Current commercialized PA imaging instruments are limited to varying degrees by their bulky size (i.e., the laser or scanning stage) or their use of complex optical components for light delivery. Here, we present a robust acoustic-resolution PA imaging system that consists of four adjustable optical fibers placed 90° apart around a 50 MHz high-frequency ultrasound (US) transducer. In the compact design concept of the PA probe, the relative illumination parameters (i.e., angles and fiber size) can be adjusted to fit different imaging applications in a single setting. Moreover, this design concept involves a user interface built in MATLAB. We first assessed the performance of our imaging system using in vitro phantom experiments. We further demonstrated the in vivo performance of the developed system in imaging (1) rat ear vasculature, (2) real-time cortical hemodynamic changes in the superior sagittal sinus (SSS) during left-forepaw electrical stimulation, and (3) real-time cerebral indocyanine green (ICG) dynamics in rats. Collectively, this alignment-free design concept of a compact PA probe without bulky optical lens systems is intended to satisfy the diverse needs in preclinical PA imaging studies.

Animal Models and Alternatives in the Quality Control of Vaccines: Are In Vitro Methods or In Vivo Methods the Scientific Equivalent of the Emperor's New Clothes?

1995 ◽  
Vol 23 (1) ◽  
pp. 61-73
Author(s):  
Coenraad Hendriksen ◽  
Johan van der Gun
Keyword(s):  
Quality Control ◽  
Test Methods ◽  
In Vitro Test ◽  
Large Numbers ◽  
Alternative Approach ◽  
Inactivated Vaccines ◽  
Vitro Test

In the quality control of vaccine batches, the potency testing of inactivated vaccines is one of the areas requiring very large numbers of animals, which usually suffer significant distress as a result of the experimental procedures employed. This article deals with the potency testing of diphtheria and tetanus toxoids, two vaccines which are used extensively throughout the world. The relevance of the potency test prescribed by the European Pharmacopoeia monographs is questioned. The validity of the potency test as a model for the human response, the ability of the test to be standardised, and the relevance of the test in relation to the quality of the product are discussed. It is concluded that the potency test has only limited predictive value for the antitoxin responses to be expected in recipients of these toxoids. An alternative approach for estimating the potency of toxoid batches is discussed, in which a distinction is made between estimation of the immunogenic potency of the first few batches obtained from a seed lot and monitoring the consistency of the quality of subsequent batches. The use of animals is limited to the first few batches. Monitoring the consistency of the quality of subsequent batches is based on in vitro test methods. Factors which hamper the introduction and acceptance of the alternative approach are considered. Finally, proposals are made for replacement, reduction and/or refinement (the Three Rs) in the use of animals in the routine potency testing of toxoids.

scholarly journals Tyrosol-Enriched Tomatoes by Diffusion across the Fruit Peel from a Chitosan Coating: A Proposal of Functional Food

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 335
Author(s):  
Silvia Tampucci ◽  
Antonella Castagna ◽  
Daniela Monti ◽  
Clementina Manera ◽  
Giuseppe Saccomanni ◽  
...  
Keyword(s):  
Tomato Fruit ◽  
Storage Period ◽  
Food Matrix ◽  
Fruit Peel ◽  
Fresh Food ◽  
In Vitro Permeation ◽  
Active Transfer

Chitosan is receiving increasing attention from the food industry for being a biodegradable, non-toxic, antimicrobial biopolymer able to extend the shelf life of, and preserve the quality of, fresh food. However, few studies have investigated the ability of chitosan-based coatings to allow the diffusion of bioactive compounds into the food matrix to improve its nutraceutical quality. This research is aimed at testing whether a hydrophilic molecule (tyrosol) could diffuse from the chitosan-tyrosol coating and cross the tomato peel. To this end, in vitro permeation tests using excised tomato peel and an in vivo application of chitosan-tyrosol coating on tomato fruit, followed by tyrosol quantification in intact fruit, peel and flesh during a seven-day storage at room temperature, were performed. Both approaches demonstrated the ability of tyrosol to permeate across the fruit peel. Along with a decreased tyrosol content in the peel, its concentration within the flesh was increased, indicating an active transfer of tyrosol into this tissue. This finding, together with the maintenance of constant tyrosol levels during the seven-day storage period, is very promising for the use of chitosan formulations to produce functional tomato fruit.

scholarly journals In vitro characteristics and in vivo platelet quality of whole blood treated with riboflavin and UVA / UVB light and stored for 24 hours at room temperature

Transfusion ◽  
2021 ◽  
Vol 61 (S1) ◽  
Author(s):  
Turid Helen Felli Lunde ◽  
Lindsay Hartson ◽  
Shawn Lawrence Bailey ◽  
Tor Audun Hervig
Keyword(s):  
Whole Blood ◽  
Room Temperature

scholarly journals In Vitro and In Vivo Multispectral Photoacoustic Imaging for the Evaluation of Chromophore Concentration

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3366
Author(s):  
Aneline Dolet ◽  
Rita Ammanouil ◽  
Virginie Petrilli ◽  
Cédric Richard ◽  
Piero Tortoli ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Photoacoustic Imaging ◽  
Hyperspectral Remote Sensing ◽  
Reference Spectrum ◽  
In Vivo Experiments ◽  
Mouse Tumors ◽  
Chromophore Concentration ◽  
Saturation Rate

Multispectral photoacoustic imaging is a powerful noninvasive medical imaging technique that provides access to functional information. In this study, a set of methods is proposed and validated, with experimental multispectral photoacoustic images used to estimate the concentration of chromophores. The unmixing techniques used in this paper consist of two steps: (1) automatic extraction of the reference spectrum of each pure chromophore; and (2) abundance calculation of each pure chromophore from the estimated reference spectra. The compared strategies bring positivity and sum-to-one constraints, from the hyperspectral remote sensing field to multispectral photoacoustic, to evaluate chromophore concentration. Particularly, the study extracts the endmembers and compares the algorithms from the hyperspectral remote sensing domain and a dedicated algorithm for segmentation of multispectral photoacoustic data to this end. First, these strategies are tested with dilution and mixing of chromophores on colored 4% agar phantom data. Then, some preliminary in vivo experiments are performed. These consist of estimations of the oxygen saturation rate (sO2) in mouse tumors. This article proposes then a proof-of-concept of the interest to bring hyperspectral remote sensing algorithms to multispectral photoacoustic imaging for the estimation of chromophore concentration.

scholarly journals Transient ICD malfunctions during oncologic radiotherapy: a multi-centre, randomized, in-vitro study

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
E Di Girolamo ◽  
M Appignani ◽  
N Furia ◽  
M Marini ◽  
P De Filippo ◽  
...  
Keyword(s):  
Real Time ◽  
Treatment Plan ◽  
Low Energy ◽  
In Vivo Dosimetry ◽  
Implantable Cardioverter Defibrillators ◽  
Shock Delivery ◽  
Transient Electromagnetic ◽  
Direct Exposure

Abstract Background Direct exposure of implantable cardioverter-defibrillators (ICDs) during radiotherapy is still considered potentially harmful, or even unsafe, by manufacturers and current recommendations. The effects of photon beams on ICDs are unpredictable, depending on multiple factors, and malfunctions may present during exposure. Purpose To evaluate transient ICD malfunctions by direct exposure to doses up to 10 Gy during low-energy RT, forty-three contemporary wireless-enabled ICDs, with at least 4 months to elective replacement indicator (ERI) were evaluated in a real-time in-vitro session in three different centres. Methods All ICDs had baseline interrogation. Single chamber devices were programmed to the VVI/40 mode and dual or triple chamber devices were programmed to the DDD/40 mode. Rate response function and antitachycardia therapies were disabled, with the ventricular tachycardia (VT)/ventricular fibrillation (VF) detection windows still active. A centring computed tomography was performed to build the corresponding treatment plan and the ICDs were blinded randomized to receive either 2-, 5- or 10-Gy exposure by a low photon-energy linear accelerator (6MV) in a homemade water phantom (600 MU/min). The effective dose received by the ICDs was randomly assessed by an in-vivo dosimetry. During radiotherapy, the ICDs were observed in a real-time session using manufacturer specific programmer, and device function (pacing, sensing, programmed parameters, arrhythmia detections) was recorder by the video camera in the bunker throughout the entire photon exposure. All ICDs had an interrogation session immediately after exposure. Results During radiotherapy course, almost all ICDs (93%) recorded major or minor transient electromagnetic interferences. On detail, sixteen ICDs (37.2%) reported atrial and/or ventricular oversensing, with base-rate-pacing inhibition and VT/VF detection. Twenty-four ICDs (55.8%) recorded non clinically relevant noise, and no detections were observed. Only three ICDs (7%) reported neither transient malfunction nor minor noise, withstanding direct radiation exposure. At immediate post-exposure interrogation, the ICDs that recorded major real-time malfunctions had VT/VF detections stored in the device memory. In none of the ICDs spontaneous changes in parameter settings were reported. Malfunctions occurred regardless of either 2-, 5- or 10-Gy photon beam exposure. Conclusions Transient electromagnetic interferences were observed in most of the contemporary ICDs during radiotherapy course, regardless of photon dose. To avoid potentially life-threatening ICD malfunctions such as pacing inhibition or inappropriate shock delivery, magnet application on the pocket site or ICD reprogramming to the asynchronous mode are still suggested in ICD patients ongoing even low energy radiotherapy exposure. Funding Acknowledgement Type of funding source: None

scholarly journals Persistence of intramyocardially transplanted murine induced pluripotent stem cell-derived cardiomyocytes from different developmental stages

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Gabriel Peinkofer ◽  
Martina Maass ◽  
Kurt Pfannkuche ◽  
Agapios Sachinidis ◽  
Stephan Baldus ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Stem Cell ◽  
Cell Adhesion ◽  
Developmental Stage ◽  
Pluripotent Stem Cell ◽  
Induced Pluripotent Stem Cell ◽  
Induced Pluripotent

Abstract Background Induced pluripotent stem cell-derived cardiomyocytes (iPSC-CM) are regarded as promising cell type for cardiac cell replacement therapy, but it is not known whether the developmental stage influences their persistence and functional integration in the host tissue, which are crucial for a long-term therapeutic benefit. To investigate this, we first tested the cell adhesion capability of murine iPSC-CM in vitro at three different time points during the differentiation process and then examined cell persistence and quality of electrical integration in the infarcted myocardium in vivo. Methods To test cell adhesion capabilities in vitro, iPSC-CM were seeded on fibronectin-coated cell culture dishes and decellularized ventricular extracellular matrix (ECM) scaffolds. After fixed periods of time, stably attached cells were quantified. For in vivo experiments, murine iPSC-CM expressing enhanced green fluorescent protein was injected into infarcted hearts of adult mice. After 6–7 days, viable ventricular tissue slices were prepared to enable action potential (AP) recordings in transplanted iPSC-CM and surrounding host cardiomyocytes. Afterwards, slices were lysed, and genomic DNA was prepared, which was then used for quantitative real-time PCR to evaluate grafted iPSC-CM count. Results The in vitro results indicated differences in cell adhesion capabilities between day 14, day 16, and day 18 iPSC-CM with day 14 iPSC-CM showing the largest number of attached cells on ECM scaffolds. After intramyocardial injection, day 14 iPSC-CM showed a significant higher cell count compared to day 16 iPSC-CM. AP measurements revealed no significant difference in the quality of electrical integration and only minor differences in AP properties between d14 and d16 iPSC-CM. Conclusion The results of the present study demonstrate that the developmental stage at the time of transplantation is crucial for the persistence of transplanted iPSC-CM. iPSC-CM at day 14 of differentiation showed the highest persistence after transplantation in vivo, which may be explained by a higher capability to adhere to the extracellular matrix.

Facile solvothermal synthesis of ultrathin spinel ZnMn2O4 nanospheres: An efficient electrocatalyst for in vivo and in vitro real time monitoring of H2O2

2021 ◽  
Vol 900 ◽  
pp. 115674
Author(s):  
Muthaiah Annalakshmi ◽  
Sakthivel Kumaravel ◽  
T.S.T. Balamurugan ◽  
Shen-Ming Chen ◽  
Ju-Liang He
Keyword(s):  
Real Time ◽  
Solvothermal Synthesis ◽  
Real Time Monitoring
Sign in / Sign up

Export Citation Format

Share Document